Quote:
Originally Posted by dodgerdad
I want to replace the airbox boot springs with crew-on hose clamps. my boots have become a bit "loose" and the airbox just isn't sitting fore enough despite wrestling it around. I figure tight screw-on hose camps should satisfy me that there is a solid air-tight seal.
|
I separated the battery box from the airbox on my pregen, and now it's easy to get the boots over the carbs, and the springs keep them on fine. Before it was about impossible to keep the boots on correctly.
I did make a couple small brackets to make sure the airbox stays forward against the carbs:
https://www.ninjette.org/forums/show...25#post1257525