ninjette.org - View Single Post - DIY - Replace the '08+ CDI (Ignitor) with the '88-94 CDI

Racer x · August 15th, 2009, 06:32 PM

I have the BTR_TIS ignition system now and with raised compression . I have ventured close to 50 deg of ignition advance and not had any problem with pre ignition. When I used the 88-94 CDI I never once heard a ping.I did have terrible detonation with the cam timing advanced to far.but after correcting that it is fine. All on 93 octane pump gas

August 15th, 2009, 06:32 PM	#7
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	I have the BTR_TIS ignition system now and with raised compression . I have ventured close to 50 deg of ignition advance and not had any problem with pre ignition. When I used the 88-94 CDI I never once heard a ping.I did have terrible detonation with the cam timing advanced to far.but after correcting that it is fine. All on 93 octane pump gas