|
Just an update...
Finally found some 0.5mm thick, but the outside diameter was 8.0mm, bought them, I was to impatient to wait Monday for the 6.0mm.
Pulled everything apart once again. Tried the new washer, they don't get stuck in the "white plastic" aka seat spring valve. Reassembled everything.
Geared up myself, started the Ninjette, went for a ride... Problem solved...
And as claimed by other, I found the bike was easier to control in traffic or in slow speed...
So, you could use the 8.0mm outside diameter, but If you can have those 6.0mm, I would put those in...
Thanks everyone and choneofakind...
A guy who is too happy to be able to ride after this too long winter...
|