View Single Post
Old August 12th, 2015, 09:54 PM   #9
ForceofWill
Blind 250 Loving Whore
 
ForceofWill's Avatar
 
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011

Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114

Posts: A lot.
Quote:
Originally Posted by Ghostt View Post
I would highly recommend that you DO NOT REMOVE THE AIR BOX, the carburetors on the bike are CV type and need to box to function properly, buy a K&N that fits the OEM airbox(K&N KA-2508 Kawasaki High Performance Replacement Air Filter by K&N Amazon.com: K&N KA-2508 Kawasaki High Performance Replacement Air Filter: Automotive Amazon.com: K&N KA-2508 Kawasaki High Performance Replacement Air Filter: Automotive ) that's the short version.

Long boring but important answer, CV carbs stands for "constant velocity". The function of the carbs is dependent on having a calm reservoir (airbox) from which to intake air at said constant velocity. Pods draw from the turbulent, unpredictable air swirling past them as you ride, which is anything but constant. Other carbs work fine with pods. CV's = no bueno, save yourself the headaches.

Now onto jetting, first you need to tune the idle mixture screws first, I recommend 3 full turns out from bottom as a good starting point, then fine tune them afterwards. As far as buying a jet kit, I personally don't have one on either my 250, or 500 ninjas. I did got up one size on my main jets, due to they are lean from the factory, and shimmed the main needles with a small washer.
Here we go again. What headaches should he save himself from? I've had this 0990 on for at least 3 years and it's only saved me from headache. The bike also pulls until it runs out of rpm for top speed.
ForceofWill is offline   Reply With Quote


1 out of 1 members found this post helpful.