Making some progress -
Got the side and center stands, rear brakes linkages, peg mounts, shocks, chainguard, and pipes on. So far I've been lucky, and have had all of the parts I've needed. Bought them way back when I started the project. The biggest thing I located back then were the NOS mufflers. I've seen a few restorations with the wrong mufflers, and they stick out pretty bad.
Probably going to pull the carb and look it over, then fire it up. Changed the oil and cleaned the "filter" (just a centrifugal separator) when I removed the inspection cover on the left engine case to redo some areas that were corroded.
Still need to polish out the paint, but I'm going to give it a little more time to dry.