WE HAVE SPARK!!!!!
Today I was able to borrow a buddys flywheel puller so tonight I swapped to flywheel and started hooking things up. About an hour later I powered the bike up and what do ya know at least the sub throttle plates are cycling! I popped off a ignition coil and took a spare plug, grounded it and spark spark spark!
Since I am going to be running a custom fuel system with a external pump and regulator I am going to have to get my fuel pressure elsewhere..... where that is is actually off my truck lol.... there is a -4 AN fitting on the chevy fuel rails so I am going to tap that 44psi of fuel pressure and feed the throttle bodies tomorrow night and hopefully the bike will fire right up! Don't hate on the rigging! lol... only temporary!!!
Pics of the rotor and the harness laying in the bike.... going to have to do quite a bit of cleaning up with the harness to make it all neat but it will get there.... After I get the bike up and running it will be going to the fabricator for the turbo setup.
Last but not least a quick video of the throttle bodies working :-)
Link to original page on YouTube.
