View Single Post
Old June 10th, 2015, 11:12 AM   #56
sharky nrk
Fighting Texas Aggie '05
 
sharky nrk's Avatar
 
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009

Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track

Posts: A lot.
Quote:
Originally Posted by subxero View Post
In short, sticking with the stock spring on the gsxr shock isn't all that bad or big of a deal. If you are going to drop $70 or so to make the conversion work then another $110 for a new spring you are $180 into it, that is a good chunk towards an aftermarket shock built specifically for you and the ninja that keeps the stock geometry. If I could go back and do it again I would probably have went aftermarket
That is a fair and accurate point. The GSXR shock works as a budget replacement situation, mostly if your in the range of the stock spring, or you can get an appropriate rate spring off another model for really cheap and swap it yourself. A respring and revalve by a suspension tuner on a GSXR shock is not the best cost effective solution.
__________________________________________________
Keep it rubber side down and enjoy the ride
Get healthy - Get Fit - Change Your Life
Click Here Or PM Me To Find More - Advocare
sharky nrk is offline   Reply With Quote


1 out of 1 members found this post helpful.