ninjette.org - View Single Post - 15T JT sprocket...which way does it go in?

MakoMoto · July 10th, 2018, 08:50 AM

The sprocket that was in was the OEM sprocket. It looks the same on both sides, each side with a rubber on it. The JT Sprocket is flat on one side and the other side has a lip or spacer on it with the JT logo, part number, etc. I've looked everywhere and some people say it goes on way and some say the other. I just don't know it it will cause catastrophic damage if I put it in wrong.

July 10th, 2018, 08:50 AM	#3
MakoMoto Ninja 250r Noob Name: Mako Location: Hartland, Michigan Join Date: Jul 2017 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 77	The sprocket that was in was the OEM sprocket. It looks the same on both sides, each side with a rubber on it. The JT Sprocket is flat on one side and the other side has a lip or spacer on it with the JT logo, part number, etc. I've looked everywhere and some people say it goes on way and some say the other. I just don't know it it will cause catastrophic damage if I put it in wrong. __________________________________________________ "Kawasaki Ninjas Rule!" - 1997 Power Wheels Commercial