July 10th, 2014, 05:56 AM
|
#75
|
|
ninjette.org guru
Name: Vlad
Location: Weaverville, NC
Join Date: Jul 2014
Motorcycle(s): 2011 Ninja 250R (Sold), 2015 Rocky Mountain Soul (Runs on fat)
Posts: 404
|
Quote:
Originally Posted by headshrink
I'm sorry, I forgot to specify that my GIPro is on my CBR, which is of course fuel injected, not my carb'ed Ninja. I've got the Ebay one on my Ninjette.
If you're referring to the Healtech GIPro, then it is just a plug (and harness). Most of the work is getting access to the top of the crankcase to plug in the harness. Programming was wayyyy easier than I expected.
Assuming you have a carb'ed Ninjette, you'll need some additional sensors and stuff to make it work. I know you'll need a speed sensor for the wheel, but don't know if their is more or not. It WILL be more involved than on a FI bike where you can just plug it in, more specifically a bike with an electronic speed sensor instead of a cable/gear driven speedo.
|
Sounds too frustrating, not hard. I'll just count the gears in my head.
|
|
|