ninjette.org - View Single Post

daverdfw · August 6th, 2016, 10:07 AM

Had a lowside on the track today. Rearset ripped a small hole in the frame which I can just get welded. The bigger issue is the shift linkage broke the end of the shift rod off. The bike does not indicate its in neutral, but the bike rolls freely and I cannot move the shift shaft with a pair of vise grips. Has anyone had to do this repair before I found the part here

http://www.ebay.com/itm/Kawasaki-EX2...3D350086230565

But I have no idea what I gotta do to swap it out. here is a pic of the damage

August 6th, 2016, 10:07 AM	#2
daverdfw ninjette.org guru Name: David Location: Fort Worth,TX Join Date: Nov 2015 Motorcycle(s): 2009 Ninja 250 Posts: 386	Need help, had a lowside and broke the shift rod that goes into the motor. Had a lowside on the track today. Rearset ripped a small hole in the frame which I can just get welded. The bigger issue is the shift linkage broke the end of the shift rod off. The bike does not indicate its in neutral, but the bike rolls freely and I cannot move the shift shaft with a pair of vise grips. Has anyone had to do this repair before I found the part here http://www.ebay.com/itm/Kawasaki-EX2...3D350086230565 But I have no idea what I gotta do to swap it out. here is a pic of the damage