|
June 24th, 2015, 10:46 AM
|
#1 |
|
ninjette.org guru
Name: Mike
Location: NJ
Join Date: Jul 2014 Motorcycle(s): 2014 Ninja 300 track bike, 2007 Suzuki GSXR 750 track bike, 2002 Yamaha R6, 1995 CBR600RR f3 track bike Posts: 304
|
Brake and Clutch Lever Compatability
I asked this question in the Pre-Gen forum but I'll ask here too sicne there's much more traffic:
I've done a search here to no avail so I'm asking here: Do the current generation brake and clutch levers fit the pre-gen Ninja? I ask because I see plenty of aftermarket levers for sale and precious little for our pre-gens. I'd like to get some adjustable folders and put the originals in the spares box. The ones in the pic are $38. I wound up paying $35 for one lever from a parts dealer at the track. Not complaining, I'm glad he was there or my day would have been done.
__________________________________________________
 Track, track, track
|
|
|
|
June 24th, 2015, 03:03 PM
|
#2 |
|
ninjette.org guru
Name: Mike
Location: NJ
Join Date: Jul 2014 Motorcycle(s): 2014 Ninja 300 track bike, 2007 Suzuki GSXR 750 track bike, 2002 Yamaha R6, 1995 CBR600RR f3 track bike Posts: 304
|
I stumbled upon these on ebay and bought them. They are specific for pre-gens. I'll post on my results when they arrive.
Mike
__________________________________________________
Track, track, track
|
|
|
|
|
June 24th, 2015, 05:57 PM
|
#3 |
|
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Swap the clutch perch, I bet the brake lever is plug and play. If not, swap the MC as well, screw it. Then just use newgen levers.
For sure the Ninja 650 MC and pregen brake levers mate up; I just put a 650 MC on my bike with the same pregen brake lever. |
|
|
|
|
June 24th, 2015, 08:05 PM
|
#4 |
|
ninjette.org guru
Name: Mike
Location: NJ
Join Date: Jul 2014 Motorcycle(s): 2014 Ninja 300 track bike, 2007 Suzuki GSXR 750 track bike, 2002 Yamaha R6, 1995 CBR600RR f3 track bike Posts: 304
|
It'll be interesting to see how these levers fit. I'm pretty sure that the brake lever is going to be a three minute job. The clutch lever may be a little more involved. We shall see.
__________________________________________________
Track, track, track
|
|
|
|
|
July 7th, 2015, 02:08 PM
|
#5 |
|
ninjette.org guru
Name: Mike
Location: NJ
Join Date: Jul 2014 Motorcycle(s): 2014 Ninja 300 track bike, 2007 Suzuki GSXR 750 track bike, 2002 Yamaha R6, 1995 CBR600RR f3 track bike Posts: 304
|
The folding levers arrived today. Took about 30 minutes to install. They feel like quality items. Went on easily.
__________________________________________________
Track, track, track
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Brake and Clutch Lever Compatibility | Mike K | 1986 - 2007 Ninja 250R Tech Talk | 9 | August 24th, 2015 08:56 PM |
| Front brake = left lever; Clutch = right lever | cadd | Riding Skills | 27 | October 7th, 2014 08:29 AM |
| Aftermarket brake/clutch lever for 07? | fr1dayn1ght | 1986 - 2007 Ninja 250R Farkles | 6 | May 20th, 2013 08:16 PM |
| WTB: Clutch lever, handle bar end, dummy cap, and clutch lever holder. 09 250r | SwagenGTI | Items Wanted | 5 | March 4th, 2013 12:20 PM |
| FS OEM stock clutch lever and brake lever | Shaol1n Monk | Motorcycle-related | 0 | July 17th, 2011 06:36 PM |
|
|
