Guang Rong exhaust info?

glitch · April 18th, 2011, 01:19 PM

Does anyone have any information on this full-system exhaust from Guang Rong?

I'm not associated with them in any way ... I just happened to come across the recent video. Look at diameter of those headers!

Article w/ specs, pictures, dyno run, and a lot of stuff that doesn't machine translate too well to english:
http://tw.myblog.yahoo.com/jw!.ikIDz...ev=-1&next=512

Youtube video:
http://www.youtube.com/watch?v=ztGVMf-gFrM

A picture:

HKr1 · April 18th, 2011, 01:32 PM

Nice name LOL

play2pwn · April 18th, 2011, 03:04 PM

Quote:

Originally Posted by HKr1

Nice name LOL

Lol the name is OM performance exhaust

AzEKnightz · April 18th, 2011, 08:17 PM

Quote:

Originally Posted by glitch

Does anyone have any information on this full-system exhaust from Guang Rong?

I'm not associated with them in any way ... I just happened to come across the recent video. Look at diameter of those headers!

Article w/ specs, pictures, dyno run, and a lot of stuff that doesn't machine translate too well to english:
http://tw.myblog.yahoo.com/jw!.ikIDz...ev=-1&next=512

Youtube video:
http://www.youtube.com/watch?v=ztGVMf-gFrM

A picture:

I contacted them and I can become a vendor IF i can get about 6 buyers to buy this unit. I can probably get them for about ~450 a piece + shipping. And I was quoted approximately 160 shipping charges... Not cheap but definitely a good potential product/exhaust.

-AzEKnightz

Mr.E · April 18th, 2011, 11:56 PM

Wow what a sexy sound that bike has!! x-)

sarapacman99 · April 19th, 2011, 12:05 AM

that's too much for the exhaust, there was a GB for a full exhaust system but cost way less than that.

AzEKnightz · April 19th, 2011, 03:56 PM

Quote:

Originally Posted by sarapacman99

that's too much for the exhaust, there was a GB for a full exhaust system but cost way less than that.

that price is approximately for 3-5 units. If we can get more people on it, I am sure we can lower the price significantly.

-AzEKnightz

ztrack157 · April 25th, 2011, 08:04 PM

eric they emailed me awhile ago about carrying their product. it is definitely a nice design and quality. they are sending me a sample.

Kevin2109 · April 25th, 2011, 08:30 PM

Thats a sexy sounding exhaust, but the price is a little high

ztrack157 · April 25th, 2011, 08:46 PM

Not really for a full cf system. It would still be the lowest price cf system around (not counting the ap rip off and not using previously listed pricing).

Kevin2109 · April 25th, 2011, 08:52 PM

what does CF mean?

And what about the VR6?

AzEKnightz · April 25th, 2011, 11:47 PM

CF = carbon fiber.

I actually am getting a sample from them too. I will update shortly.

-AzEKnightz

Kevin2109 · April 26th, 2011, 09:10 AM

Cant wait to here a review of the exhaust

kamikaze · April 26th, 2011, 12:18 PM

that thing does sound good, i just wish I could get that kind of sound from the stock can. I like the look of the stock better than pretty well all the aftermarket ones

Mulholland · April 27th, 2011, 06:44 PM

How much of the sound is it reverbreating(sp?) off the plexiglass walls of the dyno stall it's in do you figure?

Looks and sounds amazing... but something tells me a fair portion of the big bike sound os that thing bombarding off the surroubding plexiglass... would love to hear a real world clip or dyno without the stall around the bike...

AzEKnightz · April 28th, 2011, 09:19 AM

Quote:

Originally Posted by Mulholland

How much of the sound is it reverbreating(sp?) off the plexiglass walls of the dyno stall it's in do you figure?

Looks and sounds amazing... but something tells me a fair portion of the big bike sound os that thing bombarding off the surroubding plexiglass... would love to hear a real world clip or dyno without the stall around the bike...

Here you go, this is where they tested the db of the exhaust system.

CLICK HERE

-AzEKnightz

Kevin2109 · May 6th, 2011, 12:29 PM

Any update?

AzEKnightz · May 6th, 2011, 06:13 PM

Quote:

Originally Posted by Kevin2109

Any update?

My apology, the "ninja project" is currently on hold due to my RX7 project is coming to an end and all my time, effort and money will be going towards finishing it.

Hopefully in less than a month, i will get back into this and see if there are any other interests. Sorry for the delay.

Unless we get 6 people who are 100% sure they want to buy this exhaust, otherwise I cant afford to put any money into the ninja right now.

Also, if we do get 6 people into a group buy, I can lower the price of the exhaust by combine shipping and bargain with the company to lower their prices =).

-AzEKnightz

Kevin2109 · May 6th, 2011, 11:52 PM

All i know is I am very interested. Lets hope we can get more people!

April 18th, 2011, 01:19 PM	#1
glitch ninjette.org member Name: Andy Location: Oregon Join Date: May 2010 Motorcycle(s): '08 Kawasaki Ninja 250R, '09 Kawasaki Ninja ZX6R, '81 KZ440 LTD Posts: 14	Guang Rong exhaust info? Does anyone have any information on this full-system exhaust from Guang Rong? I'm not associated with them in any way ... I just happened to come across the recent video. Look at diameter of those headers! Article w/ specs, pictures, dyno run, and a lot of stuff that doesn't machine translate too well to english: http://tw.myblog.yahoo.com/jw!.ikIDz...ev=-1&next=512 Youtube video: http://www.youtube.com/watch?v=ztGVMf-gFrM A picture:

April 19th, 2011, 12:05 AM	#6
sarapacman99 Climb to Glory! Name: Charlie Location: Las Vegas Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234	that's too much for the exhaust, there was a GB for a full exhaust system but cost way less than that. __________________________________________________ I wanted to become Kamen Rider as a kid.

April 25th, 2011, 08:04 PM	#8
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	eric they emailed me awhile ago about carrying their product. it is definitely a nice design and quality. they are sending me a sample. __________________________________________________ Sportisimoto USA is born.

April 25th, 2011, 08:46 PM	#10
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Not really for a full cf system. It would still be the lowest price cf system around (not counting the ap rip off and not using previously listed pricing). __________________________________________________ Sportisimoto USA is born.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Info on Area P Exhaust Systems for the 2013 Ninja 300	rusninja	2013 - 2017 Ninja 300 Tech Talk	428	November 12th, 2013 12:33 PM
Here for Info	Fuzion7	New Members	8	September 25th, 2013 06:14 PM
Need info	Sipper'	1986 - 2007 Ninja 250R Tech Talk	15	July 21st, 2013 04:39 AM
Looking at Ninjette's...info?	smoketriples	New Members	14	June 23rd, 2011 11:31 AM
Need sprocket info	JessyBee	2008 - 2012 Ninja 250R Tech Talk	21	January 15th, 2010 11:33 AM

April 18th, 2011, 01:32 PM	#2
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	Nice name LOL

April 18th, 2011, 11:56 PM	#5
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Wow what a sexy sound that bike has!! x-)

April 25th, 2011, 08:30 PM	#9
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Thats a sexy sounding exhaust, but the price is a little high

April 25th, 2011, 08:52 PM	#11
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	what does CF mean? And what about the VR6?

April 25th, 2011, 11:47 PM	#12
AzEKnightz ninjette.org member Name: Eric Location: California, SF Join Date: Apr 2011 Motorcycle(s): 2011 Ninja 250r SE Posts: 27	CF = carbon fiber. I actually am getting a sample from them too. I will update shortly. -AzEKnightz

April 26th, 2011, 09:10 AM	#13
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Cant wait to here a review of the exhaust

April 26th, 2011, 12:18 PM	#14
kamikaze ex-ninjette.org guru :o Name: Trevor Location: Barrie, Ontario Join Date: Jun 2010 Motorcycle(s): 2003 SV1000 S Posts: 475	that thing does sound good, i just wish I could get that kind of sound from the stock can. I like the look of the stock better than pretty well all the aftermarket ones

April 27th, 2011, 06:44 PM	#15
Mulholland Garage Monkey Name: Richard Location: North Texas Join Date: Apr 2011 Motorcycle(s): 03 Ninjette Posts: 166	How much of the sound is it reverbreating(sp?) off the plexiglass walls of the dyno stall it's in do you figure? Looks and sounds amazing... but something tells me a fair portion of the big bike sound os that thing bombarding off the surroubding plexiglass... would love to hear a real world clip or dyno without the stall around the bike...

May 6th, 2011, 12:29 PM	#17
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Any update?

May 6th, 2011, 11:52 PM	#19
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	All i know is I am very interested. Lets hope we can get more people!