June 10th, 2017, 04:20 PM | #1 |
ninjette.org newbie
Name: Kevin
Location: spring hill TN
Join Date: Jun 2017 Motorcycle(s): ninja ex250 Posts: 1
|
Carb help from a newb
Hey folks. I'm new to the bike world and ended up with an 01 250r with 9k miles but has been sittting awhile. I pulled the carb and cleaned the carb which had some junked up jets. After spending 3 hours getting it back on the air box boots or will crank and idle great but hesitates when blipping the throttle and idles down really slow. Any help is great appreciate
Here's a video of it https://youtu.be/95r0gO0gbjo |
|
June 10th, 2017, 08:13 PM | #2 |
ninjette.org certified postwhore
Name: Kerry
Location: Ventura, CA
Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot.
MOTM - Apr '18, Apr '17, Apr '16
|
Welcome to the board!
|
|
June 11th, 2017, 01:28 AM | #3 |
ninjette.org member
Name: RJ
Location: PA
Join Date: Dec 2015 Motorcycle(s): 2008 Ninja 250 Posts: 210
|
Where do the revs hang at? Since the carbs are the last thing you messed with start there. Couple basics
Are they seated into the boots correctly? Did you notice if the mixture screw caps were missing when you took off the carbs? Any small rubber hoses cracked or degraded on the carbs? Loose? Hanging revs could be a bunch of things. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Motion Pro Syncpro Carb Tuner (Carb Sync) $60 Shipped | menikmati | Motorcycle-related | 4 | April 8th, 2020 12:39 AM |
Valve adjustment, carb clean, carb sync? | amad1972 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 29th, 2014 09:42 PM |
Newb from CT | csmutty | New Members | 6 | July 9th, 2012 10:25 PM |
Newb from MN | smokinsingle | New Members | 7 | December 11th, 2011 04:02 PM |
Newb here! | Squirrel669 | New Members | 9 | September 7th, 2011 07:23 AM |
|
|