October 26th, 2018, 09:14 PM | #1 |
ninjette.org newbie
Name: G
Location: Melbourne
Join Date: Aug 2017 Motorcycle(s): Ninja 250r Posts: 4
|
FYI - Ninja 300 chain guard and hugger fit
Just two holes in the swingarm, tapped to accept bolts on the hugger and support, same chain guide holes and sizes.
Its a great little OEM upgrade that can be done in an afternoon for $20. Enjoy! |
|
October 28th, 2018, 07:40 AM | #2 |
EX500 full of EX250 parts
Name: Bill
Location: Grand Rapids-ish, MI
Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot.
Blog Entries: 1
MOTM - Aug '15
|
The 300's swingarm has riv-nuts for the hugger mounting screws, but you can just drill and tap (M6x1.0) the 250 swingarm.
The hugger itself is 36014-0555 and the two mounting screws are 92154-0918. Just for the sake of completion, the two regular mounting shoulder screws for the left side are 92151-1703, if you don't have them for some reason.
__________________________________________________
*** Unregistered, I'm not your mom and I'm not paying for your parts, so do whatever you want with your own bike. *** |
|
October 28th, 2018, 04:21 PM | #3 |
ninjette.org newbie
Name: G
Location: Melbourne
Join Date: Aug 2017 Motorcycle(s): Ninja 250r Posts: 4
|
Thanks InvisiBill.
If those are your images, they are precisely the ones I located to confirm part suitability. Keep up the great work! |
|