May 21st, 2012, 06:26 PM | #1 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Racer X engine rebuild.
I thought I would start this thread to help with questions regarding first gen engines, IF anyone want a photo of something say so . I will post up what I find. First some history on the engine.
I have a 1988 ninja 250 with 139000 miles. It went through three motors to get that mileage. I also was given a 2003 ninja with a salvage title. The motor from that bike is in the 1988 and makes a knocking noise. I used most of the 2003 bike to make a perfect bike. But I need a motor. SO I will see what I can fix. This engine is from some where and had about 25000 miles on it when I got it. The rings where stuck with carbon and it had no compression. I did a port and polish job on the head and and put in a bunch of used parts and managed to go 106mph with no fairing,in the heat of June in at Maxton . BUT when I got home the oil was full of metal copper flakes, That indicates a bearing failure. But it ran really well. lets see if I can fix it and how much it cost. I dont have the money to buy a new motor. |
|
May 21st, 2012, 06:40 PM | #2 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
25k miles you say? i'm kinda interested to see the condition of the cam chain and guides at that milage... when you are in there maybe you could measure the cam chain?
__________________________________________________
|
|
May 21st, 2012, 11:46 PM | #3 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
I got a question for ya. My engine has timing issues, every time piston #1 goes to TDC, it hits the Intake valve, any idea what could be wrong? Also the cam chain skips once in a while ( even though it has a brand new tensioner), could they be related?.
I was going down the threads when I saw this and thought " I should drop racer x a line one of this days" and then saw this, is like fate want ed this to happen. Thanks in advance for the answers, if you got them. |
|
May 22nd, 2012, 05:33 AM | #4 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Great thread, Eric; thanks.
Just take many pictures as you go. It has been told many times that is cheaper to buy used than to rebuild these engines; however, in my opinion, the re-building experience will be priceless. This reference may be useful to you: http://www.dansmc.com/mc_repaircourse.htm
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
May 22nd, 2012, 05:44 AM | #5 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
The last one of these engines was sold in 2007. It will only take a short time befor the used engine option is gone. I sereously have no money for this project. But I have three engines than have similar problems with knocking sounds. I will strip the engine and see what is going on. I need an engine to sell or ride the 1988 bike so it will be worth the value of the bike to fix the engine.
|
|
May 22nd, 2012, 06:31 AM | #6 | |
ninjette.org member
Name: Dave
Location: Lisle
Join Date: Apr 2012 Motorcycle(s): 2003 Goldwing GL1800, 2002 Ninja 250, 2001 VFR800, 1999 Ducati 996 Posts: 107
|
Quote:
Great thread....I am very curious to see what is ailing your motor, and if it is a common issue. |
|
|
May 22nd, 2012, 07:03 AM | #7 | |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Quote:
|
|
|
May 22nd, 2012, 07:54 AM | #8 | ||
-
Name: -
Location: -
Join Date: May 2009 Motorcycle(s): - Posts: A lot.
|
Quote:
Quote:
Also, when the cam chain wears and stretches it does it in spots along its length rather than uniformly throughout the entire chain (this is confirmed by a few forum members who've measured their worn chains). This causes it to go tight-loose-tight-loose as it goes around the drive gear and the camshaft gears. The tight-loose-tight-loose situation causes it to "lash" at the cam chain tensioner, making a knocking noise. It's not surprising that the cam chain tensioner doesn't stand up well to this abuse. The cam chain tensioner was designed to maintain proper tension on the cam chain in response to engine accelerations and decelerations, which happen (relatively) smoothly and slowly compared to the high-frequency of the tight-loose-tight-loose lashing effect of a partially worn and stretched cam chain. Bottom line: I believe the engine problems people regularly attribute to the cam chain tensioner are actually related to or entirely caused by an irregularly worn and (as a result of that wear) stretched cam chain. So replacing the cam chain tensioner without dealing with (i.e. replacing) the worn cam chain is pointless. |
||
|
May 22nd, 2012, 05:01 PM | #9 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I tore the engine down tonight. It looks very good inside, The owner did a very good job of maintaining the bike. It looks like a crank bearing is scuffed and the rods have a little. But over all it is great.
|
|
May 22nd, 2012, 05:28 PM | #11 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
This is the cam chain and the tensioner. this all looks perfect. The tensioner is a little worn
There are a couple indentations from the ball bearings that I don't like. I will look into a manual one, Or at least a new one. The cam chain stretch spec is 127-127.4mm max is 128.5 mm that is 20 links. a link is each pin so ten outer plates or twenty pins. I had to take a look at that really close. This chain is exactly 127mm for 21 pins.It has a long way to go.But why would it be short? What am I doing wrong? except drinking beer. |
|
May 22nd, 2012, 06:52 PM | #13 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
You measure 20 spaces of 1/4" each between pins, which includes 21 pins You are a very clean and organized mechanic, Racer x Thanks for the good pictures
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
May 22nd, 2012, 06:58 PM | #14 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
You have to be that way to build engines. I also am trained as a watch maker. That helps
I will put together a parts list of things I think I will need. Gaskets and bearings but I need to measure things first . I will also need to get the ends off the crank. I have the tool for that but it is still tough. The rod bolts all get replaced every time you tighten them and I guess some O rings . I use cheap cycle parts |
|
April 21st, 2018, 04:26 PM | #15 | |
ninjette.org member
Name: Sarge
Location: Los Angeles
Join Date: Jan 2014 Motorcycle(s): EX 250, 06 CBR 1000, Duc 848, 100yr Road King, VTX 1300 Posts: 35
|
Cam Chain - Is it bad? - Do I need to replace?
Quick rundown. Bike has about 11980 miles on it. Was having problems with idle, could not get it to stay constant, and it would die when coming to a stop in traffic. Pulled the carbs twice, Chem dipping it the second time. They were very clean and had been pulled once before about 5k miles earlier. After the problem remained after the first pull, I replaced the float valve needles. Same problem. I bench synched the carbs so I did not think a carb synch was needed, or not that is wasn't needed but that it wasn't the source of the idle problem. After some research it sounded like the valves needed adjusting , which I already knew they did. The prices for valves from local shops is ridiculous ($400 was the low quote I got). From the mechanic I know who does side jobs, he wanted $250. I'd never done valves before and while I was apprehensive, I really wanted to pay someone the first time so that I could watch them do them. I've learned the hard way that stuff like this is usually not better to guess/try your hand at, unless you're willing to pay the resulting tab when you $@#% it up. Contacted him around Thanksgiving and he said he was busy for the next month. Contacted him again...vacation. So I did it. Not difficult but the torque specifications on the adjustment nut have me wary. Valves were SUPER tight. After the 1st adjustment it was back to idling normally, so that issue was solved. However, and here's the problem I have now, the engine is ridiculously loud. It's also doing this hesitation in higher gears causing an on again off again power fluctuation. I reinstalled the stock CCT. No joy there. I bought a Krieger manual cam chain tensioner and installed that, but while the noise was lessened, it was still extremely loud. I read that noisy valves are happy valves, but the noise seemed/s excessive. And still the power fluctuations. I checked the valve clearances again. They were all within spec. I relayed this to Mark Krieger and he was extremely helpful with trying to remedy my issue, however his conclusion was that the tensioner had run out of adjustment and that I would need to grind the rocker arm to adjust the Cam Chain further. So yesterday I open her up again because I wanted to check to make sure the cams were still in time. They are perfect. So I pulled the right side case cover off, but I still have no idea which rocker it is I need to grind. Pretty sure I need to remove the clutch to access it based on the diagram. However, before I do this, I have the suspicion that this will NOT solve my problem as the chain seems to be stretched. I noticed this the first time I adjusted the valves. As I turned the engine there were spots that were really loose and easy to turn, and real tight difficult to turn spots. I read this in another post, which seems to be my exact problem:
Quote:
My chain https://www.youtube.com/watch?v=K2ljecz4euc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine Teardown and Rebuild | Rustitution | 1986 - 2007 Ninja 250R Tech Talk | 77 | February 27th, 2017 09:17 PM |
Need Help Oil,engine rebuild | meggyewill | 1986 - 2007 Ninja 250R Tech Talk | 10 | July 22nd, 2014 02:39 AM |
Engine Rebuild | FvnnyL3tt3r1ng | 1986 - 2007 Ninja 250R Tech Talk | 210 | November 2nd, 2013 07:16 PM |
Two quick engine rebuild questions | jayman87 | 1986 - 2007 Ninja 250R Tech Talk | 16 | March 3rd, 2013 07:26 AM |
Engine Rebuild Question | jayman87 | 1986 - 2007 Ninja 250R Tech Talk | 16 | December 21st, 2012 09:30 PM |
Thread Tools | |
|
|