08+ new gen front wheel, rotor, tire, axle, speedo

gt_turbo · June 18th, 2012, 07:44 PM

parts being sold due to no longer needing them after my 636 front end conversion. all used stock items off a 09 250R with 7500 miles, so expect normal wear. no dibs, no holding items till you get paid etc. pm me for part availability and then paypal asap and the part is yours. what you see in the picture is what you get. all sales final, no refunds, no returns. all items include shipping to any lower 48 state.

USED front wheel NO dents, a few slight scratches and a bit of curb rash. front wheel rode 100% straight on my bike before removal. SOLD

see my other parts for sale here:
http://www.ninjette.org/forums/showthread.php?t=107946

USED front rotor - straight. SOLD

CZroe · June 19th, 2012, 12:49 AM

Miles?

I may end up getting the speedo sender/meter gear. Does the spacer fit into it or does the sleeve the axle goes through come out? If so, I need to see if it will fit over the custom spacer I have on my pregen with newgen wheels. I'd check using the one from my newgen but my front stand broke.

Since yours is removed already, can you please measure the outer diameter of the sleeve that goes into the speedo sender/meter gear? Thanks!

gt_turbo · June 19th, 2012, 04:47 AM

mileage listed in the first post. from what I recall, the speed sensor just fits over the wheel bearing, and the axle just goes right through. there are not any spacers or washers between the speed sensor and the wheel. you can always look at a parts diagram from bikebandit or something.

CZroe · June 19th, 2012, 06:02 AM

Quote:

Originally Posted by gt_turbo

mileage listed in the first post.

Only saw the tire mileage at first.

Quote:

Originally Posted by gt_turbo

from what I recall, the speed sensor just fits over the wheel bearing, and the axle just goes right through. there are not any spacers or washers between the speed sensor and the wheel. you can asleevelways look at a parts diagram from bikebandit or something.

I did, which is what prompted my question/investigation. It shows the newgen one in multiple pieces including spacer-like sleeve that I assume is inside it, but the pregen one is metal and the inner sleeve is one piece with the external housing. I should be getting a replacement stand soon so I will check it soon enough. Don't hold it for me though.

gt_turbo · June 19th, 2012, 04:42 PM

Quote:

Originally Posted by CZroe

Only saw the tire mileagge at first.

I did, which is what prompted my question/investigation. It shows the newgen one in multiple pieces including spacer-like sleeve that I assume is inside it, but the pregen one is metal and the inner sleeve is one piece with the external housing. I should be getting a replacement stand soon so I will check it soon enough. Don't hold it for me though.

read the words all the way at the top of the first post. slowly the first line!

anyways took some pics of the speed sensor for ya.

gt_turbo · June 30th, 2012, 10:50 AM

weekend bump

gt_turbo · July 5th, 2012, 06:17 PM

update - rotor sold!

gt_turbo · July 15th, 2012, 08:02 AM

bump

gt_turbo · August 4th, 2012, 07:35 PM

front wheel SOLD!

June 18th, 2012, 07:44 PM	#1
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	08+ new gen front wheel, rotor, tire, axle, speedo parts being sold due to no longer needing them after my 636 front end conversion. all used stock items off a 09 250R with 7500 miles, so expect normal wear. no dibs, no holding items till you get paid etc. pm me for part availability and then paypal asap and the part is yours. what you see in the picture is what you get. all sales final, no refunds, no returns. all items include shipping to any lower 48 state. USED front wheel NO dents, a few slight scratches and a bit of curb rash. front wheel rode 100% straight on my bike before removal. SOLD see my other parts for sale here: http://www.ninjette.org/forums/showthread.php?t=107946 USED front rotor - straight. SOLD Last futzed with by gt_turbo; August 5th, 2012 at 04:06 PM.

June 19th, 2012, 12:49 AM	#2
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Miles? I may end up getting the speedo sender/meter gear. Does the spacer fit into it or does the sleeve the axle goes through come out? If so, I need to see if it will fit over the custom spacer I have on my pregen with newgen wheels. I'd check using the one from my newgen but my front stand broke. Since yours is removed already, can you please measure the outer diameter of the sleeve that goes into the speedo sender/meter gear? Thanks!

June 19th, 2012, 04:47 AM	#3
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	mileage listed in the first post. from what I recall, the speed sensor just fits over the wheel bearing, and the axle just goes right through. there are not any spacers or washers between the speed sensor and the wheel. you can always look at a parts diagram from bikebandit or something.

June 30th, 2012, 10:50 AM	#6
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	weekend bump

July 5th, 2012, 06:17 PM	#7
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	update - rotor sold!

July 15th, 2012, 08:02 AM	#8
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	bump

August 4th, 2012, 07:35 PM	#9
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	front wheel SOLD!