May 4th, 2014, 02:34 PM | #1 |
ninjette.org member
Name: Brian
Location: Atlanta
Join Date: Dec 2012 Motorcycle(s): 250 Ninja Posts: 179
|
Tyga exhaust
I know they make/made one for the new gen and I am wondering if it will work on the pre-gen. Have no problem trimming the lower if required and can make a hanger for it if needed.
Interested in it since they come ready for an O2 sensor. Thanks for the info! |
|
May 4th, 2014, 07:04 PM | #2 | |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
Quote:
The stock 88-07 head pipe ID (inside diameter) is 1 1/8". The outlets are the same size. The stock 08-12 head pipe ID is 1". The outlets are 1 1/2". Muzzy makes a 2-n-1 exhaust which is cheaper than a Tyga exhaust system, A Muzzy 88-07 head pipe ID is 1 1/2". The outlet is 1 3/4". |
|
|
May 11th, 2014, 06:47 PM | #3 |
ninjette.org member
Name: Kyle
Location: Kansas city
Join Date: Apr 2014 Motorcycle(s): 02 Aprilia RS70 97 Ninja 250 Posts: 53
|
|
|
May 13th, 2014, 03:26 AM | #4 |
ninjette.org member
Name: Brian
Location: Atlanta
Join Date: Dec 2012 Motorcycle(s): 250 Ninja Posts: 179
|
The main question is if the exhaust ports on the head are the same?
If they are then the Tyga will work. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: TYGA full exhaust CF can | josefmd | Motorcycle-related | 12 | May 2nd, 2013 05:38 PM |
TYGA full exhaust(carbor fiber round can) | josefmd | Motorcycle-related | 4 | November 21st, 2012 08:30 AM |
O2 sensor cap for Tyga exhaust | josefmd | 2008 - 2012 Ninja 250R Tech Talk | 4 | November 18th, 2012 08:01 PM |
tyga slip on exhaust system | thisdudematt | 2008 - 2012 Ninja 250R Tech Talk | 6 | August 16th, 2012 02:15 AM |
Tyga full exhaust leak issue | 675Raisinator | 2008 - 2012 Ninja 250R Tech Talk | 11 | March 27th, 2012 12:32 PM |
|
|