January 23rd, 2017, 02:45 PM | #1 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Newgen 08-12 Front Captive Wheel Spacers
First off, im not a commercial enterprise I just happened to design and have a batch of these made by a machine shop to help reduce the costs and help other racers.
Included in the set for $60 shipped USPS is right and left side "captive" front wheel spacers for the 08-12 Ninjette. Right side is a traditional captive spacer with lip that is retained by the existing dust seal. Left speedo side uses two small neodymium magnets to retain the spacer to the steel inner bearing race. Its strong enough to hold the spacer in place to ease front wheel installation. Both are made of 6061 aluminum and CNC machined. I sold a few of these on ebay for $75/set and a couple trackside for varying prices. I think the $60 price is fair, but if price is holding you back PM me an offer. |
|
February 2nd, 2017, 07:00 PM | #2 |
ninjette.org member
Name: ROB
Location: WORCESTER
Join Date: Oct 2014 Motorcycle(s): 08 NINJA 250,EX500,YSR50,86 VFR750 Posts: 54
|
How can I get a set of these
|
|
February 3rd, 2017, 04:11 PM | #3 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
All PMs replied to
|
|
March 6th, 2017, 08:47 AM | #4 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
I have a 300 in my garage now, so I tested these to see how they fit.
looking at the parts fiche on the 300 both the left and right use the same part number, 92143-1187. Sure enough if i use two of the right spacers I had made for the 250 they work perfect on the 300. I only have two sets left for the 250, if there is enough interest ill have more made and have some 300 sets made at the same time. |
|
April 1st, 2017, 05:51 PM | #5 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Good info.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
April 29th, 2017, 12:31 AM | #6 |
ninjette.org newbie
Name: Jason
Location: Seattle, WA
Join Date: Aug 2014 Motorcycle(s): 06 Zx10r (track) 07 zx10r (street) 2010 ninja 250 (track/street) Posts: 5
|
Does this remove the speedometer?
|
|
May 2nd, 2017, 11:02 AM | #7 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Yes it does remove the speedo drive gear/housing.
Update, Im working on anodizing and should be able to offer this anodized very soon. |
|
May 25th, 2017, 11:12 PM | #8 |
ninjette.org newbie
Name: Sean
Location: RSM
Join Date: May 2017 Motorcycle(s): Ninja 250 Posts: 2
|
Interested. Do you make rear spacers as well?
|
|
May 26th, 2017, 09:07 AM | #9 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Im working on something for the rear, however to do it right it will require removal/replacement of the bearings so im not sure its something people other than me will be interested in doing.
|
|
August 9th, 2017, 09:07 AM | #10 |
ninjette.org newbie
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016 Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom Posts: 6
|
are these still available for purchase?
|
|
August 9th, 2017, 11:10 AM | #11 |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
|
|
August 9th, 2017, 01:54 PM | #12 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
I can use a couple sets as well.
|
|
August 9th, 2017, 02:52 PM | #13 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
I have only one, maybe 2 sets available now. I will check and confirm. Since it seems like there is interest Ill have another batch made - they should be done in less than 2 weeks.
Quite a bit of the cost is in the drilling, epoxying, and the magnets themselves on the speedo drive side. Is the magnet a feature that adds value or should it be removed? |
|
August 9th, 2017, 03:11 PM | #14 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
What would cost difference be without drilling & magnets?
|
|
August 24th, 2017, 05:57 AM | #16 |
ninjette.org newbie
Name: Terry
Location: NJ
Join Date: Dec 2014 Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track) Posts: 6
|
I'd be interested in 2 right sides for a Ninja 300 front if you are having some made.
Any idea if you will have Rear's made too (for 300)? thanks! |
|
September 5th, 2017, 11:28 AM | #17 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Alright folks I did not have these made last month. Ive spoken to the machine shop and sent in a work order this morning.
New pricing: $60 NewGen. set with magnets shipped $50 NewGen set w/o magnets shipped $30 Newgen speedo side spacer only no magnets shipped $45 300 set shipped Ill make you a deal if you buy multiples. My paypal address is my username @gmail. If anyone has any specific questions ill be glad to help where I can. I havent seen enough interest to develop the rear spacers for the 250 or 300 yet, maybe that will change. |
|
September 5th, 2017, 12:02 PM | #18 |
ninjette.org newbie
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016 Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom Posts: 6
|
payment sent
|
|
September 15th, 2017, 08:19 AM | #19 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
I shipped the last sets I had but the good news is my machinist finished up 10 fresh new sets today. Ill offer 20% off to the first three purchases if you can supply an installed picture.
Ill be at Barber with STT Oct 15/16 and again with WERA Nov 2/3 if anyone needs to see them in person. |
|
September 18th, 2017, 05:55 AM | #20 |
ninjette.org newbie
Name: Terry
Location: NJ
Join Date: Dec 2014 Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track) Posts: 6
|
Payment sent 9/15 for set of front spacers for ninja 300.
Let me know when you get them out, and I'll get pics for you asap. |
|
September 18th, 2017, 01:12 PM | #21 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Two sets claimed, one remaining for 20% off.
KiddEng - Shipped out today empire00 - need your shipping address and yours will go tomorrow |
|
September 19th, 2017, 09:00 AM | #22 |
ninjette.org newbie
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016 Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom Posts: 6
|
just received mine! I wont have time to install until the weekend. Ill post up some pix when I do!
|
|
September 21st, 2017, 05:59 AM | #23 |
ninjette.org newbie
Name: Terry
Location: NJ
Join Date: Dec 2014 Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track) Posts: 6
|
|
|
September 22nd, 2017, 02:35 PM | #24 |
ninjette.org newbie
Name: Terry
Location: NJ
Join Date: Dec 2014 Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track) Posts: 6
|
Installed the front spacers on the 300 this morning at the track, nice fit and easy on.
If you're thinking of making rears I'm in for a set haha! Last futzed with by KiddEng; September 25th, 2017 at 07:29 AM. Reason: Added on fork pics |
|
October 30th, 2017, 07:03 AM | #25 |
ninjette.org member
Name: Chris
Location: Atlanta
Join Date: Nov 2015 Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R Posts: 107
|
Ill be at the WERA GNF Thur/Friday if anyone wants to come by and check a set out on my bike or pick one up. Look for novice #47.
|
|
September 21st, 2020, 11:46 PM | #26 |
ninjette.org newbie
Name: charles
Location: Phoenix
Join Date: Sep 2020 Motorcycle(s): 09 xb12r, 09 ninja 250 w 300 motor, 04 gsxr600, 06 rmz 450, 89yz490 Posts: 2
|
Captive spacers
how shipped to 85202
For a 2013 300 set w magnets And an 09 250 set without Thx |
|
October 16th, 2020, 02:37 PM | #27 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Doesn't look like Chris has been back here since March 2019, he probably won't get this message.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ninja 250 Captive Spacers | DCMoney | Ninjettes At Speed | 47 | February 26th, 2024 10:48 AM |
Ninja 250 08-12 Rear Captive Spacers | DCMoney | Motorcycle-related | 27 | January 23rd, 2017 06:16 PM |
newgen or EX500 17" front wheel in Pregen front forks | Yamahawk | 1986 - 2007 Ninja 250R Tech Talk | 45 | February 13th, 2016 08:25 PM |
Replaced a NewGen front wheel? I need your bearing spacer! | InvisiBill | Items Wanted | 10 | February 20th, 2014 01:04 PM |
WTB: Newgen Front Wheel | KChatham | Items Wanted | 1 | June 3rd, 2012 05:44 AM |
Thread Tools | |
|
|