June 5th, 2021, 04:18 PM | #1 |
ninjette.org member
Name: jack
Location: Dville
Join Date: Nov 2020 Motorcycle(s): GL1500, ninja 250 Posts: 11
|
Gold valve emulators.
Good day,
Upon installation with sonic springs and emulators, does the mini spring and the cap go back on the damping rod? Followed instructions here: https://faq.ninja250.org/wiki/Instal...rs_and_springs Make no mention of that. Anyone? Thank you, J |
|
June 6th, 2021, 08:47 AM | #2 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
If you’re talking about the top out spring, you probably want to keep that. I have seen them replaced with rubber before though.
|
|
June 7th, 2021, 04:51 AM | #3 |
ninjette.org member
Name: jack
Location: Dville
Join Date: Nov 2020 Motorcycle(s): GL1500, ninja 250 Posts: 11
|
Here are some pics
|
|
June 7th, 2021, 10:54 AM | #4 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
That spring is the top out spring, and you want that. The “cap” at the bottom of fork leg is to help with bottoming out( creates an all most hydraulic lock in the last bit of travel) want to keep that too
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just picked up some gold valve emulators | psych0hans | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 17th, 2012 11:34 AM |
Gold Valve Emulators | KChatham | 2008 - 2012 Ninja 250R Tech Talk | 4 | January 4th, 2012 11:03 PM |
Thread Tools | |
|
|