November 11th, 2010, 03:01 PM | #1 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
My Ninja 250 Mods....
Hello Everyone,
Since I'm almost complete with my mods, I'd thought I'd post some pics of what I've done so far. Pretty happy with all of my results! Added PUIG Dark Smoke Windscreen Added 6000K HIDs in both the low and high beams Installed Projekt D Fender Eliminator Kit Installed Black Rear Spools Did the Diode Mod Installed Proton Flush Mount Turn Signals and replaced rear turn signals bulbs with LEDs. (Everything,with the exception of the tail light, has LEDs, including the dash and indicators) Changed the Fairing bolts to color match the bike I took the red reflectors off the back stock fender and swapped them with the amber ones that were in the front. I hated the orange against the red and black color scheme. Installed Keiti Tribal Tank Pad Had it lowered with a Roaring Toyz Lowering Kit (These will be reversed tomorrow so the text is upright) And just installed today... Two Brothers Black Series Slip-On Exhaust with Red P1 Silencer and Red anodized Bolts Before Silencer and Bolts... After... Exhaust Video:
Link to original page on YouTube.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents Last futzed with by nattygirl; December 20th, 2010 at 12:34 PM. |
|
November 11th, 2010, 03:06 PM | #2 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
Looks good...
|
|
November 11th, 2010, 03:10 PM | #3 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
nicely done! looks good
seat cowl and hugger should be in your possession shortly |
|
November 11th, 2010, 03:13 PM | #4 |
ninjette.org member
Name: Chris
Location: LA
Join Date: Dec 2009 Motorcycle(s): 250r Posts: 199
|
Gjob
|
|
November 11th, 2010, 03:17 PM | #5 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Looks great That 2Bros can looks sweet
|
|
November 11th, 2010, 11:06 PM | #6 |
ninjette.org member
Name: argel
Location: Boston
Join Date: Oct 2010 Motorcycle(s): NINJA 250 Posts: 12
|
Looks good! Nice exhaust.
|
|
November 12th, 2010, 02:09 AM | #7 |
ninjette.org member
Name: airmax
Location: 626
Join Date: Oct 2010 Motorcycle(s): 2010 250r Posts: 26
|
Very very nice! What type of hid kit is that and do you mind sharing how much you got the ninja 250 special edition for otd? Love the black series!
|
|
November 12th, 2010, 02:37 PM | #8 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Thanks for all the comments everyone.
@airmax I got the HID kits off of ddmtuning.com. Their kits are very reasonably priced and have lifetime warranty. I used them for my car and also on my husbands gsxr 750. As for the cost of the Ninja, I got it for $4500 OTD. That was back in May. I'm sure they're cheaper now that they have the 2011s out.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
November 12th, 2010, 04:30 PM | #9 |
ninjette.org member
Name: John
Location: Rosemead
Join Date: Nov 2010 Motorcycle(s): kawasaki 2009 brand new ninja 250r Posts: 13
|
Hell yea! Temple City! That's where I got mines too. F bertz! T C!
|
|
November 12th, 2010, 10:42 PM | #10 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Lookin great so far! Let's be honest though... noone is ever "almost complete"...lol. Look forward to seeing and hearing more about your bike in the future!
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
November 12th, 2010, 11:57 PM | #11 |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
Nice job..
|
|
November 14th, 2010, 10:07 AM | #12 |
seeking twisties
Name: Bill
Location: Houston, TX
Join Date: Nov 2010 Motorcycle(s): '07 Ninja 650R, '09 250R special edition Posts: 199
|
In the video the exhaust sounds almost the same with or without the silencer. Is there much difference in loudness?
__________________________________________________
Bill |
|
November 14th, 2010, 12:08 PM | #13 |
ninjette.org certified postwhore
Name: Scott
Location: Carlise Ohio
Join Date: Apr 2010 Motorcycle(s): Yahama v star 650 classic Posts: A lot.
|
looks good!
|
|
November 14th, 2010, 03:26 PM | #14 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
@ Bill
There isn't really much of a difference with or without the silencer. Two brothers sells two other types of silencers that are supposed to reduce more db's, but they come in gold only. So I went for the P1 since you can choose the color you want for that one. It's loud, but I like it! Funner to ride that way.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
November 18th, 2010, 11:26 AM | #15 |
Motorcyclist
Name: James
Location: Maryland
Join Date: May 2010 Motorcycle(s): 2014 Ninja 300 ABS Posts: A lot.
|
Great looking bike, love that exhaust.
|
|
November 18th, 2010, 02:23 PM | #16 |
ninjette.org member
Name: Marc
Location: Montreal
Join Date: Jun 2009 Motorcycle(s): 09 250R, 08 connie 14, 08 honda ruckus(gave to mom) Posts: 92
|
I like it, clip-ons too maybe?
|
|
November 18th, 2010, 04:46 PM | #17 |
ninjette.org member
Name: KT
Location: Left Coast
Join Date: Oct 2010 Motorcycle(s): 1 of them Big Four Posts: 84
|
nice ride, when I grow up I wanna have a ninjette like you
|
|
November 29th, 2010, 10:45 AM | #18 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Lookin' very good. Red and black's not my favorite color, but if I keep seeing bikes like that, I may come 'round. Mind sharing your source for the LED dash lighting? I'm not a fan of the yellow bleed-through from the stock incandescents.
Is that a Tacoma I see in the background? Just bought one myself and loving it, especially in comparison to my old truck (a 1989 Ranger that's held together with duct tape and prayers)
__________________________________________________
Proud member of the Blue Army |
|
November 29th, 2010, 11:45 AM | #19 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Thanks Everyone for your positive comments on my bike. It's been expensive, but I'm happy with the way it's turned out so far.
@ Momaru: I buy all of my leds from www.v-leds.com. Our dashes use 194 bulbs, so you can buy any color and stick it in there. Mine are 6K White. They are pretty bright in the dark. My husband says they're too bright, but I like the way it looks. These are the exact ones I got. If you join their facebook, they occassional post coupon codes, so it comes out cheaper. V-leds is a little bit more compared to other retailers, but I think you pay for quality and their leds are top notch. I have led lighting all over my car, and they haven't done me wrong yet. http://www.v-leds.com/Exterior-LED/C...-p6478377.html FYI: I changed the turn sign indicator also, and that doesn't blink as well as it used to with a regular bub. It blinks, but seems like there's some hesitation to it. Also, that is a Tacoma in the background. It belongs to my cousin though. We have a Chevy Silverado.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
November 29th, 2010, 12:42 PM | #20 |
Money is a drug.
Name: Chaos
Location: South Jersey
Join Date: Jun 2010 Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP) Posts: 251
|
just curious, where'd u get the color matched bolts
|
|
November 29th, 2010, 01:14 PM | #21 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
The red ones I got on ebay. Here's a listing similar to it. I don't recall what I paid for them.
http://cgi.ebay.com/ebaymotors/Red-W...item43a36d06aa As for the black ones, I got a kit from www.bikebolts.com
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
November 29th, 2010, 01:23 PM | #22 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
+1 for www.bikebolts.com
|
|
November 29th, 2010, 01:47 PM | #23 |
Money is a drug.
Name: Chaos
Location: South Jersey
Join Date: Jun 2010 Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP) Posts: 251
|
awesome thanks
|
|
November 29th, 2010, 02:23 PM | #24 | |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Quote:
By "indicator" I'm assuming you mean the bulbs in the housing? If you want to correct the hesitation in the 'blink,' you may need to replace your turn signal relay with one that's designed to work properly with the reduced resistance/power load from the LEDs. I'm currently using the CF12ANL-01 from SuperBrightLEDs with my all-LED turn signal system and have been quite satisfied. Like your supplier, they're a little expensive, but have done right by me.
__________________________________________________
Proud member of the Blue Army |
|
|
November 29th, 2010, 02:28 PM | #25 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Nah, I was talking about the green indicator on the dash that blinks when you have your turn signals on. I changed that to an led and when it blinks, it doesn't turn off all the way.
I got the led flasher relay covered already. Thanks for looking out though.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
November 30th, 2010, 01:49 PM | #26 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Haha, oops, my bad. Glad you're so on top of things though. Had so many people asking me for help troubleshooting turn signal issues of late, guess it's become a 'standard reply'
__________________________________________________
Proud member of the Blue Army |
|
November 30th, 2010, 01:58 PM | #27 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Yeah, I've read many of your posts regarding it. Once I get my bike monkey tail light, I'll have the same setup as you. I'm hoping all goes well with my current relay, otherwise, I will be buying the one you recommended.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
December 1st, 2010, 01:52 AM | #28 |
ninjette.org member
Name: Adam
Location: Guam
Join Date: Oct 2010 Motorcycle(s): 2010 Kawasaki Ninja 250R Limited Edition - R.I.P. 12/2/2010 Posts: 140
Blog Entries: 1
|
that's a crazy looking kick stand. aren't you scared to turn your bike on that thing?
__________________________________________________
"Your truth, is not my truth" -Bruce Lee |
|
December 1st, 2010, 07:54 AM | #29 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Are you talking about spinning the bike on the kickstand? I'm not strong enough to do that myself anyways, so no worries for me regarding that. My husband usually handles that if needed, but we haven't actually tried it since getting the new kickstand put on. I know there are others with this kickstand. Wonder how their experiences have been?
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
December 8th, 2010, 05:25 PM | #30 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Got some updated pics.
Got my Shogun Frame Sliders on. Added some Ninjette.org decals to the bottom. Compliments of CThunder-Blue. And got a new sticker for my windscreen.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
December 8th, 2010, 05:33 PM | #31 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
December 8th, 2010, 07:36 PM | #32 |
ninjette.org member
Name: Mike
Location: Gladwin, MI
Join Date: Apr 2010 Motorcycle(s): 2002 XR200r Posts: 128
|
I dig everything you did, except the skull sticker on the windscreen. Everything else is really sweet.
|
|
December 8th, 2010, 10:09 PM | #33 | |
ninjette.org member
Name: Adam
Location: Guam
Join Date: Oct 2010 Motorcycle(s): 2010 Kawasaki Ninja 250R Limited Edition - R.I.P. 12/2/2010 Posts: 140
Blog Entries: 1
|
Quote:
your bike pretty much looks like how i would envision my bike to be set up if I still had mine. nice job
__________________________________________________
"Your truth, is not my truth" -Bruce Lee |
|
|
December 10th, 2010, 01:21 PM | #34 |
sleeper
Name: chris
Location: Hawaii
Join Date: Nov 2010 Motorcycle(s): '10 250r, '10 690 duke Posts: 558
|
this is a great post..i love DIY..why i closed my shops down and jus stay to myself these days..anyway..
the diode mod you posted i assume is to runt he LED's in the cluster yes? i have the proton flush mounts with the monkey rear and you'll need a new blinker relay..they just stick with all LED;s..sucks. great post! got alot of the same parts on the bike...looks good! |
|
December 10th, 2010, 06:11 PM | #35 |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
Very nice...
|
|
December 10th, 2010, 06:53 PM | #36 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Sweet looking bike. I love the red bolts and silencer on the exhaust and the skull on the windscreen.
|
|
December 20th, 2010, 12:19 PM | #37 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
Installed my integrated tail light this weekend. Here's some more pics.
Also put on some 250R stickers compliments of Kevin's Garage
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
January 5th, 2011, 09:38 PM | #38 |
Dusty
Name: dan
Location: sacramento
Join Date: Oct 2010 Motorcycle(s): 2008 green ninja 250 Posts: 50
|
nice
very nice bike
__________________________________________________
....Better Safe Then Sorry!!!.. |
|
January 5th, 2011, 09:39 PM | #39 |
Dusty
Name: dan
Location: sacramento
Join Date: Oct 2010 Motorcycle(s): 2008 green ninja 250 Posts: 50
|
very cool
alot of mods
__________________________________________________
....Better Safe Then Sorry!!!.. |
|
January 6th, 2011, 07:56 AM | #40 |
ninjette.org guru
Name: Kevin
Location: Athens
Join Date: Aug 2010 Motorcycle(s): 1981 Honda Cx500 Custom, 2002 Ninja 250 Posts: 289
Blog Entries: 1
|
I like bike, but u lost me with the windshield sticker. Too much.
__________________________________________________
"Rudeness is a weak persons attempt at strength." |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2005 Ninja 250 $2000 -- Lots of mods!! | NealWright | Motorcycle-related | 2 | March 24th, 2015 03:25 AM |
2006 Ninja 250 mods | aspenratt07 | 1986 - 2007 Ninja 250R Farkles | 31 | January 24th, 2014 04:39 PM |
Ninja 250 Mods and Overclocking | hamm | Videos | 3 | February 6th, 2013 04:07 AM |
Some of the mods to my 2010 Ninja 250 SE | Ktaylor07 | 2008 - 2012 Ninja 250R Farkles | 3 | March 24th, 2012 10:45 PM |
2009 ninja 250 Mods | 808yewtube | Videos | 1 | September 20th, 2011 09:55 PM |
Thread Tools | |
|
|