January 8th, 2011, 01:19 PM | #1 |
ninjette.org member
Name: Clint
Location: Texas
Join Date: Dec 2010 Motorcycle(s): 2008 Ninja 250r 2009 Honda CBR600RR Posts: 178
|
Downshifting for a right turn.
So today was my second day out on the street, I still have work yet to do on my engine braking (quite a bit). However, I was approaching a right turn with a green light and I knew i had to brake and get down to a proper gear for the turn, except I didn't know what gear to shift down to (I was running in 6th). So I just rolled off the throttle, pulled in the clutch, kicked down to 3rd or 4th and coasted halfway thru the corner before slowly easing out the clutch and giving it gas. What should I have done?
|
|
January 8th, 2011, 01:28 PM | #2 |
2012 is here,let's ride!!
Name: dex
Location: visalia,ca.
Join Date: Sep 2009 Motorcycle(s): 2009R,'12 suzuki +500 Posts: 354
|
i'm not a pro by any means,my best advice will be purchase keith code's "a twist of a wrist II" CORNERING BIBLE.i have watched it over and over etc..very ,very helpfull to us noobs.
the video even explains how "advice "from other riders can lead to bad habits.
__________________________________________________
''I regulate every shade of that!'' |
|
January 8th, 2011, 01:36 PM | #3 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
That works just fine, really. Ideally you want to already be in the correct gear and speed before you start the turn, with the clutch out (as opposed to coasting), so you can begin rolling on the throttle through the turn (Slow--Look--Press--Roll). However, especially when making right turns with traffic behind me, I do find myself trail braking (braking into the turn) in order to get out of the way of following traffic as quickly as possible, and then feathering out the clutch to get back on the gas (without jerking myself going from off- to on-throttle) in order to exit the turn.
But really, I wouldn't say you did anything *wrong*. Yeah, it wasn't ideal, but in street riding conditions rarely are so it is best you just become as comfortable with the bike as you can, so you can shift / turn / brake / feather / roll on the controls whenever you need to and as smoothly as possible. Good luck and have fun!
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 8th, 2011, 01:43 PM | #4 | |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Quote:
Take everything you hear with a grain of salt, and compile it together with your own knowledge and understanding to reach the most logical conclusion for your situation.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
|
January 8th, 2011, 01:47 PM | #5 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Unless you have no knowledge or understanding, and then just do exactly what someone tells you to do on the internet.
(But that only works for this site. )
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
January 8th, 2011, 06:36 PM | #6 |
ninjette.org sage
Name: Dre
Location: DMV
Join Date: Aug 2009 Motorcycle(s): 2014 Ninja 300, 2008 ZX6, 2011 Ninja 1000 Posts: 622
|
|
|
January 10th, 2011, 03:15 PM | #7 | |
ninjette.org sage
Name: Misti
Location: Vancouver, BC
Join Date: Oct 2010 Motorcycle(s): currently: Yamaha YZF 250 dirt/motard Posts: 787
|
Quote:
Cheers and be safe! Misti
__________________________________________________
"Leap and the net will appear!" superbikeschool.com www.motomom.ca |
|
|
January 12th, 2011, 02:25 PM | #8 | |
ninjette.org member
Name: Clint
Location: Texas
Join Date: Dec 2010 Motorcycle(s): 2008 Ninja 250r 2009 Honda CBR600RR Posts: 178
|
Quote:
|
|
|
January 12th, 2011, 04:04 PM | #9 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
For 90 degree intersections, I find myself in 2nd gear a lot. However, if the intersection has a triangle with it's own turn lane, then I might be in 3rd depending on road & traffic conditions and the length & radius of the turn.
|
|
January 12th, 2011, 04:06 PM | #10 |
User Title Free Since '12
Name: Floyd
Location: Barbados
Join Date: Dec 2010 Motorcycle(s): '10 Ninja 250R Special Edition Green Posts: A lot.
Blog Entries: 13
MOTM - Feb '12
|
After you ride a bit you go by feel. Your foot just sort of knows where you need to be. You'll stop looking at the tach for up and downshifts, and you feel (or hear) where you should be. I never know what gear I'm in - I don't count. You just know that the bike is revving right and has power, with the very occassional tach glance to confirm what you're feeling. It is tempting to think of it like a math question, but it's more like an essay.
That said, if you want the math on it, it will depend on how tight the corner is and how fast you want to go. I'm assuming cornering RPMs in the 5000-7000 range, which is fairly low/conservative. 40MPH: 4th gear (Assuming a stock 14/45 gearing, if you are pulling 6500 RPMs in the corner, 4th gear will allow you to travel around 40MPH.) 30-35MPH: 3rd gear (14/45, 6500 RPMs, 3rd gear will be about 35mph. At 5500RPM, you'll be going 30.) 15 -30MPH: 2nd gear (At 14/45, 6000RPMs is 25MPH, varies from 20 to 30 in 5-7k range). Honestly, I let the revs drop in 2nd and make all but the slowest corners in 2nd -- 1st gear is pretty useless in 14/45 setup. But if you are cornering while counting up and down shifts, calculating RPMs and MPH, you probably aren't looking through the turn, countersteering, etc. Go on feel instead. Until you develop the feel, err on the side of being in too high a gear (too low a gear could cause your rear wheel to lose traction.) Just downshift once, and if you need more ooomph, downshift again. Pretty safe to click down a couple of gears if you are crusing in 6th before you step down one at a time to find the right gear. Start early before the corner so you've got the right speed in advance and aren't stealing cornering traction with engine braking (which takes away rear wheel traction.) Pretty soon, your foot will know what to do without thinking about it.
__________________________________________________
"Improvement makes straight roads, but the crooked roads without improvement, are roads of genius." — William Blake |
|
January 12th, 2011, 08:59 PM | #11 | |
ninjette.org member
Name: Clint
Location: Texas
Join Date: Dec 2010 Motorcycle(s): 2008 Ninja 250r 2009 Honda CBR600RR Posts: 178
|
Quote:
I plan on going out and practicing all this tomorrow, providing it's not too cold out |
|
|
January 13th, 2011, 09:57 AM | #12 |
ninjette.org sage
Name: Nate
Location: west virginia
Join Date: Apr 2010 Motorcycle(s): 2009 Honda CBR600RR Posts: 633
|
You slow down to turn? jk jk
Just feel it out and finding the right speed / gear before the turn always helps just dont be the guy that takes a turn and lets off the throttle because he went in to hot.
__________________________________________________
"Riding a motorcycle is like playing sports, not everyone is cut out for it." - WVNinja |
|
January 17th, 2011, 02:07 PM | #13 | |
ninjette.org sage
Name: Misti
Location: Vancouver, BC
Join Date: Oct 2010 Motorcycle(s): currently: Yamaha YZF 250 dirt/motard Posts: 787
|
Quote:
Did you get a chance to go out and practice? How did it go? Misti
__________________________________________________
"Leap and the net will appear!" superbikeschool.com www.motomom.ca |
|
|
January 18th, 2011, 11:43 AM | #14 |
ninjette.org member
Name: Clint
Location: Texas
Join Date: Dec 2010 Motorcycle(s): 2008 Ninja 250r 2009 Honda CBR600RR Posts: 178
|
Yeah, it seems like I dont even have to blip the throttle much to rev match, but i have had more success. Is not rev matching a bad habit?
|
|
January 18th, 2011, 11:54 AM | #15 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Yes, it can be a bad habit, if you don't rev high enough, you could possibly lock up the back wheel for a split second, but that could be all it takes to go down. If you rev too high, the bike could jolt forward unexpectedly causing you to lose control (less likely on a 250 but can still happen). just my
__________________________________________________
|
|
January 18th, 2011, 11:58 AM | #16 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Once you get the hang of engine braking, it becomes like second nature. ^And don't let my last post scare you because engine braking can be dangerous if you have no clue what your doing, but with just a little practice you should be fine.
__________________________________________________
|
|
January 18th, 2011, 02:05 PM | #17 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Yes, I would recommend rev-matching for the above reason. But, here are the two possible situations when downshifting without rev-matching:
1) You quickly pull in the clutch, pop down to the lower gear, and let out the clutch. This can result in skidding the rear wheel for a second, ESPECIALLY if you are already braking with the front brake OR if you are turning slightly (like if the road curves before the stop, for example). While this usually will just result in a little bouncing and you go about your business, it can result in a much worse situation. 2) You do the shift, but then let out the clutch more slowly to let the engine catch up to the rear wheel (figuratively speaking) to keep the rear from skidding. However, now every downshift loses you maybe an extra second compared to downshifting with a quick blip and getting the powertrain re-engaged ASAP. Does that make sense?
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 18th, 2011, 02:29 PM | #18 |
ninjette.org sage
Name: Marc
Location: Crawfordville, Florida
Join Date: Jan 2010 Motorcycle(s): 2005 Suzuki S50, 2006 Kawasaki Ninja EX250F, 1990 Honda PC800, 2000 Yamaha TW200 Posts: 848
|
You want to keep the power on going through a turn, not coasting. You have to set your speed and gearing BEFORE entering the turn, not slowing down or shifting IN the turn. In other words, do all your shifting down to the proper gear before you enter the turn, not during the turn. Best traction comes from slowly applying the throttle more as you get about half way through and accelerating a little as you straighten out. We are talking about riding on the street, not on the track, so you have to be aware of how fast you can go relative to the sharpness of the turn, as well as be totally aware of your surroundings (like other cars and pedestrians). If you think you are entering a little too fast once you are in the turn, or going wide, don't hit the brakes or chop the throttle, just countersteer more and you should get through it. If it was too fast, make sure you enter slower next time. Most of the time when riding on the street making a 90 degree right (or left) turn, you will be in 2nd or 3rd gear going 10-15 mph or less around the turn.
|
|
January 20th, 2011, 08:25 AM | #19 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Ideally this is indeed the case, but in most street turns a rider will hardly be going fast enough that less-efficient techniques will result in crashing. Trailbraking, shifting gears, coasting, rolling off the throttle, etc., while not ideal, are not going to kill you in a 10mph turn into a parking lot. In general, as long as they are done smoothly and within reason, they can be done successfully and more effectively than an ideal turn. But, don't let those techniques develop into habits that mess up faster turns when correct form and technique becomes more crucial.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
January 20th, 2011, 09:21 AM | #20 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
Me? I would have taken that turn in 6th gear PINNED. In it to win it! Oh wait, we're not talking about a track turn, are we?
|
|
January 20th, 2011, 10:59 AM | #21 |
ninjette.org newbie 2,000
Name: Francis
Location: Vancouver
Join Date: Jan 2011 Motorcycle(s): Ninja 250r Posts: 160
|
I'm no pro and a very new rider. It was my first day out yesterday on the street but I've done some riding non-intersection wise.
Anyways, I think I do my right turns in your situation in 2nd, but mostly 1st. It's safer to be slow, right? haha... |
|
January 20th, 2011, 11:27 AM | #22 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
On a stock bike, 2nd gear is still plenty low enough for almost any turn unless pulling from a stop, and even that is still doable. Some might even actively recommend 2nd gear over 1st, especially for a new rider, because 1st gear will make the bike much more sensitive to small throttle inputs, which can make control a bit more different.
BTW, the content of my previous post was based on what I had been told as a new rider. I had originally thought every turn must be taken exactly like the Slow-Look-Press-Roll taught in the MSF course, especially after I accidentally had a minor rear-wheel skid coming into a turn in my first week. But, I was assured that as long as you are smooth and careful and riding at safe speeds for the turn and conditions, using some alternate techniques and doing different things will turning won't really hurt you and can actually be beneficial, like if you are trying to avoid being rear-ended and don't want to slow down to 10mph in a 50 before starting the turn.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Downshifting woes | RogerPapaMike | 1986 - 2007 Ninja 250R Tech Talk | 14 | April 30th, 2014 10:20 AM |
Downshifting Probs | indr | 2008 - 2012 Ninja 250R Tech Talk | 15 | June 30th, 2013 09:43 AM |
Downshifting | akshay11 | Riding Skills | 17 | March 18th, 2012 02:52 PM |
Downshifting prior to a turn | NinjaD27 | Riding Skills | 24 | July 7th, 2010 10:50 AM |
Downshifting Problems | Neoki | Riding Skills | 22 | June 1st, 2010 12:01 PM |
Thread Tools | |
|
|