September 30th, 2012, 12:07 PM | #1 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
DIY Ninja 300 Fender Eliminator Kit and New Rear Blinkers
Just got done with my fender eliminator kit and it turned out to be a very easy setup. I used the below parts and put a quick video of the finished product up as well.
First got these parts Adaptor for the license plate $4 Adaptor for the new rear blinkers I got. $20 You will need a new flasher relay - At autozone the FL32 or EL12 works fine. $12 Just an FYI if you follow the DIY link I gave you below it has a three prong relay which requires a ground. The EL12 or FL32 are two prong and plug and play and do notrequire the ground. Hope this helps. I did get blinkers for $20 as well. You could use the stock blinkers but it wouldn't be as clean or sturdy. Rear View Side View Underneith View Video
Link to original page on YouTube. Last futzed with by Surferboy120; October 6th, 2012 at 07:15 AM. Reason: added comments |
|
September 30th, 2012, 12:15 PM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Looks clean! I'd like to see an undertail pic with the stock stuff removed before mounting anything back.
|
|
September 30th, 2012, 12:17 PM | #3 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
|
|
September 30th, 2012, 01:43 PM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/linked from new "300" specific DIY listing at the top of the tech section
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 1st, 2012, 02:01 PM | #5 |
ninjette.org guru
Name: Ross
Location: St. Louis
Join Date: Aug 2010 Motorcycle(s): 2007 ninja ex500, 2010 Ninja 250r, 2004 zzr600, 2003 CBR600rr, 2013 Ninja 300...in that order :D Posts: 266
|
very clean indeed and looks great
oh, and i went with the red wheel tape as well! lol |
|
October 1st, 2012, 02:08 PM | #6 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Did you get the new 300 as well? Change your profile!
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 1st, 2012, 03:20 PM | #7 |
ninjette.org guru
Name: Ross
Location: St. Louis
Join Date: Aug 2010 Motorcycle(s): 2007 ninja ex500, 2010 Ninja 250r, 2004 zzr600, 2003 CBR600rr, 2013 Ninja 300...in that order :D Posts: 266
|
|
|
October 1st, 2012, 03:22 PM | #8 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 1st, 2012, 04:22 PM | #9 |
ninjette.org guru
Name: Ross
Location: St. Louis
Join Date: Aug 2010 Motorcycle(s): 2007 ninja ex500, 2010 Ninja 250r, 2004 zzr600, 2003 CBR600rr, 2013 Ninja 300...in that order :D Posts: 266
|
lol! i had a bit of trouble getting there :P thx though!
|
|
October 1st, 2012, 05:32 PM | #10 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Go back again. It still says 2010 ninja 250r and 2004 zzr600 under your motorcycles. (It's another field to edit right on that same profile page)
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 3rd, 2012, 08:03 PM | #11 |
ninjette.org member
Name: Eddie
Location: West Palm Beach
Join Date: Jan 2012 Motorcycle(s): 300 white/black Posts: 28
|
I was thinking red wheel tape as well...or blue.....hmm .
Names eddie by the way. First post. Had a 250 now i got this bug eye baby. |
|
October 3rd, 2012, 08:15 PM | #12 | |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
Quote:
I am also really happy I went with the white over the SE Green I originally wanted. This is my first white motorcycle and I don't see myself getting tired of it. |
|
|
October 3rd, 2012, 08:19 PM | #13 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
October 3rd, 2012, 08:22 PM | #14 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
Of all the white motorcycles I have seen this one below is my favorite. I really like the white wheels on it. I am not sure if the little ninja could pull it off but this bike does and then you can forget about wanting red wheel tape.
|
|
October 3rd, 2012, 08:29 PM | #15 |
ninjette.org member
Name: Eddie
Location: West Palm Beach
Join Date: Jan 2012 Motorcycle(s): 300 white/black Posts: 28
|
Thanks for the welcome. I actually bought that 250 rebuilt to learn on then sold it about 2 months ago. I was going to buy a new one but i found out about this about a day or two before the new york release and my choice was made. I love it
First brand new bike. I'm scared of getting it stolen though because i live in an apartment complex. Wish it could sleep with me. |
|
October 6th, 2012, 06:13 AM | #16 | |
ninjette.org member
Name: J
Location: Toronto
Join Date: Sep 2012 Motorcycle(s): Ninja 300 Posts: 103
|
Quote:
What's the relay for? Couldn't you just splice the 12V LED blinkers directly to the existing turn signal harness? Got a diagram for it? Thanks!
__________________________________________________
My Ninja 300 Build Photoblog Greater Toronto Area 250/300 Riding Group |
|
|
October 6th, 2012, 06:23 AM | #17 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Don't you think you could have made it a bit more compact? Good job though. Nice DIY.
Edit :- just saw your video, can't wait to see it finished. |
|
October 6th, 2012, 07:02 AM | #18 | |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
Quote:
This DIY does a great job of showing the install process which I will add to my thread and why I didnt go to deep into my install. http://www.ninjette.org/forums/showt...ht=DIY+blinker |
|
|
October 6th, 2012, 07:08 AM | #19 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
Yes I could have but I wanted the lights to be wider than most people go. The reason for me is that when i am driving and see a motorcycle with flush mounted lights its actually harder for me to see quickly which way they are signaling. Just a personal thing but with that mindset I wanted to make sure I wasn't hard to see for others. Once my new Texas plate arrives I will also be able to get rid of the license plate mount which will be nice.
|
|
October 6th, 2012, 07:18 AM | #20 | |
ninjette.org member
Name: J
Location: Toronto
Join Date: Sep 2012 Motorcycle(s): Ninja 300 Posts: 103
|
Quote:
__________________________________________________
My Ninja 300 Build Photoblog Greater Toronto Area 250/300 Riding Group |
|
|
October 8th, 2012, 08:47 AM | #21 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I was actually only talking about the mount, the lights look good where they are
|
|
October 8th, 2012, 08:48 AM | #22 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
That's an R1... It'll look sexy even if it had NO paint... just sayin...
|
|
October 8th, 2012, 01:44 PM | #23 | |
MSF Instructor
Name: Mike
Location: Tampa
Join Date: Sep 2012 Motorcycle(s): 2013 Ninja 300, 2010 Yamaha WR250R, 2008 CBR600RR Posts: 117
|
Quote:
I also hate R1s. And midgets. |
|
|
October 8th, 2012, 02:40 PM | #24 |
Finding some curves....
Name: Thomas
Location: Hurst,Texas
Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268
|
|
|
October 18th, 2012, 08:55 PM | #25 |
ninjette.org sage
Name: Katherine
Location: Schofield Barracks, HI
Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767
|
Why does your temp plate say 2012 Kawasaki?
__________________________________________________
|
|
October 19th, 2012, 07:43 PM | #26 |
ninjette.org member
Name: Eric
Location: Portland
Join Date: Oct 2012 Motorcycle(s): 13' zx-6r 636 Posts: 155
|
Great, now that i've seen this, i feel like the stock fender looks boring lol
__________________________________________________
Yes, I'm a squid. But it's okay, I love squid, so can you |
|
November 6th, 2012, 06:25 PM | #27 |
ninjette.org member
Name: J
Location: Toronto
Join Date: Sep 2012 Motorcycle(s): Ninja 300 Posts: 103
|
Targa bracket with ebay led blinkers and plate lights:
__________________________________________________
My Ninja 300 Build Photoblog Greater Toronto Area 250/300 Riding Group |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ninja 300 SS Fender eliminator kit for sale | anacron | Motorcycle-related | 0 | May 31st, 2014 09:13 PM |
Thread Tools | |
|
|