October 7th, 2013, 11:32 AM | #1 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Awesome farkles from Indonesia
@Bob2010, @dfox, @akima @LNasty @VERSACE@ZackoFF96..some really cool stuff.
http://cyber-ninja250r.darkbb.com/t9...e-and-get-some Believe the very bottom part means if you spend over 1million IDR you get 10% off. ---------------------------------- --------------------------- Tank Cover B:----------------------------- Tank Cover Type C------------------------------- Tank Cover Type D-------------------------------- Tank Cover Type E ----------------------- Rear Huggers [IMG] http://i1179.photobucket.com/albums/x385/graffityminimart/Bodyparts/IMG00019-20110605-1300_zpsf77de4be.jpg[/IMG] ----------------------------- Undertails! -------------------------------------- Undercowls!-------------------------------- Front Fenders! ------------------ Headlamp Covers!---------------------------- Reartail Replica M1 (Short)----------------------------- Reartail Replica M1 (Long)------------------------- Reartail Replica Ducati----------------------------------- Reartail Replica ZX------------------------------------- A-Tech Replica Fairings!-------------------------- I have left out the front upper replica cowls, streetfighter fairings type 1 and 2 aaand the streetfighter engine cover. if anyone wants them i can add them
Last futzed with by Aggrotech; October 10th, 2013 at 04:06 PM. |
|
October 7th, 2013, 01:25 PM | #2 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Argh, this would be so much easier if their photobucket wasn't private!
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
October 7th, 2013, 01:32 PM | #3 | |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Quote:
the ducati tail farkle omgggg. specifically made for the carb 250! |
|
|
October 7th, 2013, 01:35 PM | #4 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
I was able to get into the PB album but only the one image. I'd like to just scroll through.
I am INSANELY jealous of all the mods they have.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
October 7th, 2013, 03:24 PM | #5 | |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Awesome farkles from Indonesia!
Quote:
ducduc tail and tank cover will look noice with my headlamp cover :O Last futzed with by Aggrotech; October 7th, 2013 at 04:36 PM. |
|
|
October 7th, 2013, 05:33 PM | #6 |
ninjette.org sage
Name: Fox
Location: Boston
Join Date: May 2012 Motorcycle(s): 08 250R Posts: 881
|
mmm... streetfighter fairings look awesome. Type 1... that white bike is awesome.
|
|
October 7th, 2013, 07:23 PM | #7 |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
I can't see or understand anything on that site
Ill save my suspense until the pics are posted !
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
October 7th, 2013, 07:29 PM | #8 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
|
|
October 8th, 2013, 03:53 AM | #9 |
ninjette.org member
Name: Dave
Location: CNY
Join Date: Apr 2012 Motorcycle(s): 2012 250R CLG Posts: 23
|
...hmmm not sure what you guys talking about, worked for me
just a few |
|
October 8th, 2013, 05:43 AM | #10 |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
You guys should really go to Indonesia if you want to mod your 250
there are lots of cooler stuff than those here. and they sell those pretty cheap, around 30$ for each tank covers. |
|
October 8th, 2013, 09:09 AM | #11 | |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
Quote:
I can contact and text the seller too if you want |
|
|
October 8th, 2013, 09:11 AM | #12 |
Daily Jap rider
Name: Lance
Location: La Porte
Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.
|
prices are retarded! $400 for a tank cover!!!!!!! **** that!
|
|
October 8th, 2013, 09:13 AM | #14 |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
|
|
October 8th, 2013, 09:25 AM | #15 |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
Page translation :
------------- We from graffiti mart wants to offer our products which are based on fiber materials. In this thread we’re going to show products that are for use on Ninja 250R carbureted model. Our products use quality materials, its for none other to give our best to costumers, not for quantity and money * one example is the use of fiberglass mesh cloth This part is the most important thing to make the products stronger, more flexible, and guarantee the finishing of the products. * the material is rather expensive and the process takes a long time, that’s why not many manufacturers want to use this material * for comparative purpose you can check the cheaper parts, they are rather weak and easy to break, and not as good as ours. * the next point is PRECISION * our products are handmade, which is why it’s very precise and can be use immediately to your bike. * the last is coloring * our product is carefully painted, therefore the tolerated color difference is about 5%, so you wont be able to differentiate our products and the originally made products. ----------- yep that about sums it up |
|
October 8th, 2013, 09:33 AM | #16 |
Daily Jap rider
Name: Lance
Location: La Porte
Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.
|
My bad, just saw that its in ruples
* Kondom Tangki Tipe A/B/C/D = IDR 400.000 * Kondom Tangki Tipe E = IDR 450.000 * Rear Hugger = IDR 400.000 * Undertail = IDR 450.000 * Undercowl = IDR 300.000 * Front Fender = IDR 300.000 * Cover Headlamp = IDR 175.000 * REARTAIL replika M1 (SHORT.LONG) = IDR 1.000.000 * REARTAIL replika DUCATI = IDR 1.200.000 * REARTAIL replika ZX = IDR 1.100.000 * FRONT UPPER COWL replika A-TECH = IDR 900.000 - IDR 1.650.000 (tergantung jenis lampu yang diaplikasikan) * FAIRING replika A-TECH = IDR 1.700.000 * FAIRING STREETFIGHTER TIPE.1 = IDR 600.000 * FAIRING STREETFIGHTER TIPE.2 = IDR 700.000 * ENGINE COVER STREETFIGHTER = IDR 400.000 |
|
October 8th, 2013, 09:38 AM | #17 |
Daily Jap rider
Name: Lance
Location: La Porte
Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.
|
I want the type C or E tank cover now. How do they stay on?
|
|
October 8th, 2013, 09:44 AM | #18 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
I have no idea. I made an account on the forums to try and contact the seller but you need an admin to verify your account so who knows how long this'll take. Also messaged them on FB and on Yahoo. surely they will answer one of them!
|
|
October 8th, 2013, 09:44 AM | #19 |
Daily Jap rider
Name: Lance
Location: La Porte
Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.
|
wonder what shipping would cost to U.S.
|
|
October 8th, 2013, 09:49 AM | #20 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
I'm liking the undertail. As long as it comes out cheaper than the hotbodies one, this poor guy may suddenly get a flood of orders.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
1 out of 1 members found this post helpful. |
October 8th, 2013, 01:35 PM | #22 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Well yeah, that too!
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
October 8th, 2013, 09:39 PM | #23 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
He is def right about the fiber-mesh... It is one of the stronger fiber products, and hand laid is the way to go... Their products look pretty crisp and on point!!! With the conversion rate I'd say as long as they ship a major carrier and your best friend doesn't love forming fiberglass you will wind up on the good end of the deal.
On fiberglass... You would be suprised at how many shops use none fiberglass products in their fiber products... I used to do door panels out of mostly or all felt and resin... Would be hard, and last, but was not the quality piece that I charged double or triple for out of mesh mat. If it looks woven its good... You see nothing but strands going every way or something that doesn't look right, you may wanna study up on it... There may be a hood scoop made out of felt and bondo out there... But hey dude said cheap and to make it now.( the customer is always right) I hope it don't hurt nobody, an air catcher flying off at speed is nothing to trifle with!
__________________________________________________
|
|
October 8th, 2013, 09:43 PM | #24 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Your English looks fine to me
I know plenty of folks that live here that use worse English, myself included some times
__________________________________________________
|
|
October 9th, 2013, 12:34 AM | #25 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Anyone else wanna try and see how they do? Still no response from any admins so i cant post or message anyone on the forums and the seller has not been on yahoo/FB.
|
|
October 9th, 2013, 07:34 AM | #26 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Saw they have a twitter account but it's private and only showing 1 or so tweets so doesn't look like they are active there either.
Made it to the end of the original thread, it was bumped in August so someone is still around.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
October 9th, 2013, 11:46 AM | #27 |
ninjette.org newbie
Name: 熊哲均
Location: TAIWAN
Join Date: Jan 2013 Motorcycle(s): 2011 NINJA 250 Posts: 9
|
How to buy?
Thanks |
|
October 9th, 2013, 11:55 AM | #28 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
|
|
October 9th, 2013, 03:00 PM | #29 | ||
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
Quote:
Quote:
thanks bro, that means a lot to me |
||
1 out of 1 members found this post helpful. |
October 9th, 2013, 03:24 PM | #30 | |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Quote:
I'm actually liking the undertail, the hugger, and the headlight cover....
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
|
October 10th, 2013, 05:33 AM | #31 |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
guys i already contacted the seller and he said he can to deliver the goods by ship or by plane
so what about it guys ? |
|
October 10th, 2013, 06:47 AM | #32 | |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Quote:
It's coming out to just under $100 (1.025.000 IDR) for the three pieces i am looking at. Did he happen to say how much shipping would be? If I am allowed a choice, let's say by plane. Since it's probably dependent on weight/volume, I'm wanting the headlight cover, the undertail, and the rear tire hugger. I have the candy lime green 2012 bike. Your translation says the color match is about 5%. Could you translate the rest of this part for us? * Untuk urusan warna ,biasa kita kategorikan di bagian pengecatan. Di bagian ini lagi-lagi banyak case ,calon customer bertanya masalah warnanya sama atau tidak .. Dengan senang hati saya jawab tidak .. Karena untuk menghasilkan produk yg sama warnanya dengan parts lain di motor yg sama,hampir tidak mungkin dilakukan kalau tidak diguyur seluruhnya alias siram satu body ,, Boleh tanya ke bengkel repair mobil atau motor,kalau cat ulang hanya salah satu panel pada mobil tsb (misal: bumper/kap mesin/dll) sedangkan yg lainnya tidak .. apakah mereka berani menjamin 100% tidak ada perbedaan gradasi warna .. Udah pasti jawabannya tidak juga dari mereka,hehehe .. Buat kita juga bgitu,sama 100% memang sulit dilakukan walau kita pun menggunakan bahan dan warna yg sama seperti original nya, di samping itu bahan yg kita gunakan juga berbeda,antara body ori dari plastik ABS sedangkan kita dari fiber' .. Trus poduk kita belang dong warnanya kalau dipasang ke motor ?! Kita punya tolensi gradasi warna antara 5-10% saja,jadi hampir sulit dilihat secara kasat mata kcuali anda perhatikan dengan detail dan mata melotot sambil membandingkan dengan tegas sama warna asli pabrikan .. Jadi masalah warna sama atau tidak / warna belang atau tidak sudah saya jelaskan di atas yah ..
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
|
October 10th, 2013, 10:51 AM | #33 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Earlier you mentioned you liked teh headlamp cover. Check out my thread on that exact item, that i bought from Sportisi awhile ago. http://www.ninjette.org/forums/showthread.php?t=112982 ---- *edited first post* Hopefully these conversions are Accurate! |
|
October 10th, 2013, 11:15 AM | #34 | |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Quote:
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
|
October 10th, 2013, 03:05 PM | #35 |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
I wouldn't mind 2 under cowls and 2 huggers shipped to buffalo ny 14211
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
October 10th, 2013, 03:25 PM | #36 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Oh, yeah, that would be helpful.
Shipping to Fallon, NV 89407
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
October 10th, 2013, 05:03 PM | #37 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Ducati tail in black
shipping to fresno california 93722 |
|
October 10th, 2013, 09:39 PM | #38 |
ninjette.org guru
Name: Artie
Location: Canada
Join Date: Mar 2013 Motorcycle(s): Stuff Posts: 284
|
I wouldn't mind a hugger and a front fender.
__________________________________________________
Paint side up, rubber side down! |
|
October 10th, 2013, 11:06 PM | #39 | |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
Quote:
the seller didnt tell me about the shipping rates though translation : for color, it will be categorized in the painting section. in this case, there are many consumer asking whether the color will be the same as the factory color or not. Unfortunately, i will have to say no. because, in order to make a product with the same color as you bike, its almost impossible unless you paint the whole bike. you can ask your local painter, if you only paint 1 of the parts, not all of the parts, can they guarantee 100% no difference in the color ? of course they will also say no, hehehe this also applies to us, 100% same color is very hard to paint even though we use the same material and color like the factory color. other than that, our material is different too, factory use ABS plastics and we use fibers. "so, the color wont be the same if we apply it to our bike?" we have color gradation tolerance about 5%-10%, so it will be hard to differentiate. except if you actually look hard and try to spot the difference, and if you compare it with the factory color. So thats it about color, as i already explained above |
|
|
October 10th, 2013, 11:13 PM | #40 |
ninjette.org member
Name: Zacko
Location: Asia
Join Date: May 2012 Motorcycle(s): 2011 Ninja 250R Posts: 84
|
and about the shipping.
why dont you guys do GB ? send the goods to one place, then one of you guys send them to their respective owners ? i think its cheaper than sending each of the goods directly to houses ? |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Farkles | beazy411 | 2013 - 2017 Ninja 300 Farkles | 15 | August 21st, 2013 10:47 AM |
My next farkles | Old Lemon | 2008 - 2012 Ninja 250R Farkles | 16 | October 25th, 2012 06:50 PM |
New farkles, and some that I took off | algerath | 2008 - 2012 Ninja 250R Farkles | 6 | August 7th, 2011 04:18 PM |
Some NEW farkles | IndyTwoFiddy | 2008 - 2012 Ninja 250R Farkles | 26 | July 13th, 2011 06:07 AM |
Where do you get your farkles? | P1NDLESK1N | 1986 - 2007 Ninja 250R Farkles | 11 | July 17th, 2009 11:15 AM |
Thread Tools | |
|
|