February 18th, 2014, 09:42 AM | #41 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
everyone, Alex is designing, Im making. I HAZ TOOLZ , ALEX HAZ BRAINZ.
and Alex has a ninjette to take measurements Probably knock out a nice set by the end of next week. Even if no one wants Ill probably make a few for shits and giggles. Ill PC them black or white, maybe blue.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 18th, 2014, 09:54 AM | #43 |
Your face
Name: Wes
Location: SF Bay Area
Join Date: Jul 2013 Motorcycle(s): 2014 Honda CBR650f Posts: A lot.
|
Alex's design will work fine for the 2fiddy's right? I know there was a conversation on the previous page, but I don't understand all your mechanical mumbo jumbo
__________________________________________________
"even a proper fitting helmet can 'get loose'" -csmith |
|
February 18th, 2014, 10:12 AM | #44 | |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
I have no gunmetal power
I have white, black, red, blue, neon green, bismark gold, teal, aaaaand random stuff. but idk if that stuff is good. Quote:
Alex has a 250. Ally has the 300.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
|
February 18th, 2014, 10:25 AM | #45 | |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
Quote:
|
|
|
February 18th, 2014, 10:26 AM | #46 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
dont they make the aluminum ones for cheap there though?
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 18th, 2014, 10:29 AM | #47 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
|
|
February 18th, 2014, 10:34 AM | #48 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
ive scraped the footpeg sliders to half their length @ the track..I need these brackets so bad..:S
|
|
February 18th, 2014, 11:18 AM | #49 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
these are gonna cost more than $15 in shipping to india though... haha
I can send you the CAD drawing if you want when I am done.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 18th, 2014, 05:03 PM | #50 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
|
|
February 18th, 2014, 06:01 PM | #52 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
|
|
February 19th, 2014, 09:11 AM | #53 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
more like your dimensions... since I have to redraw it in AutoCAD anyways...
and this is why Im gonna send you and Ally a set. AND I gave you a good way to make money with that 3D printer... honda fan bois would be lining up dude! hahaha
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 19th, 2014, 09:30 AM | #54 |
Ninja chick
Name: Allyson
Location: Athens, GA
Join Date: Jun 2009 Motorcycle(s): '13 Ninja 300 Posts: A lot.
Blog Entries: 4
MOTM - Dec '13, Feb '15
|
I've got Justin's adjusters on my 300 and they are working beautifully!
__________________________________________________
Sometimes it's the journey that teaches you a lot about your destination. ~Drake Check out my Appalachian Trail journal, 2015! Postwhores are COOL! ~Allyson |
|
February 19th, 2014, 09:52 AM | #55 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
|
|
February 19th, 2014, 10:25 AM | #56 | |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
Quote:
|
|
|
February 19th, 2014, 10:26 AM | #57 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
|
|
February 19th, 2014, 10:33 AM | #58 |
Ninja chick
Name: Allyson
Location: Athens, GA
Join Date: Jun 2009 Motorcycle(s): '13 Ninja 300 Posts: A lot.
Blog Entries: 4
MOTM - Dec '13, Feb '15
|
Calling @alex.s !
__________________________________________________
Sometimes it's the journey that teaches you a lot about your destination. ~Drake Check out my Appalachian Trail journal, 2015! Postwhores are COOL! ~Allyson |
|
February 19th, 2014, 10:35 AM | #59 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
the stock rod is about 3.5 inches, i put on a rod that came with the woodcraft rearsets which i think is 4.5"
__________________________________________________
|
|
February 19th, 2014, 10:37 AM | #60 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
First I'll get the bracket made then check the bazzaz shift rod.. Of that doesn't work I'll get a new rod made.. That shouldn't be too difficult..
|
|
February 19th, 2014, 10:38 AM | #61 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
Also I know it's not really related to brackets but what would be the best material to get suspension linkages(dogbones) made out of? Ss or really good aluminum?
|
|
February 19th, 2014, 10:43 AM | #62 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
the dog bones are pretty simple linkage that doesn't take a terrible amount of force, t6 alu is more than enough. you should be able to find a threaded collar about an inch long. put it on the end of the stock rod, then put in another inch of threaded rod. presto chango, stock rod is now an inch longer.
__________________________________________________
|
|
February 19th, 2014, 10:45 AM | #63 | |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
Quote:
|
|
|
February 24th, 2014, 08:00 PM | #64 |
ninjette.org member
Name: Archit
Location: India
Join Date: Jan 2014 Motorcycle(s): Ninja 300 Posts: 181
|
Ive decided to just raise the rearsets and not raise the bike. I like the lowered suspension setup. So I'm hoping to get these brackets made.. Any luck with testing them?
|
|
March 3rd, 2014, 01:43 PM | #65 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
@alex.s hasnt sent me the drill template.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
March 3rd, 2014, 01:55 PM | #67 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
wut not the plastic one?! gotta mail dat bitch
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
March 3rd, 2014, 05:26 PM | #68 |
ninjette.org member
Name: Nick
Location: Abington
Join Date: Feb 2014 Motorcycle(s): Ninja 250r Posts: 15
|
what are these for? (im new to mechnics lol)
|
|
March 4th, 2014, 08:33 AM | #69 |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
|
|
March 4th, 2014, 09:14 AM | #70 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
yeah they change the riding position.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
March 6th, 2014, 05:33 AM | #71 |
Ninja chick
Name: Allyson
Location: Athens, GA
Join Date: Jun 2009 Motorcycle(s): '13 Ninja 300 Posts: A lot.
Blog Entries: 4
MOTM - Dec '13, Feb '15
|
Slightly. It's not a huge change. They were just what I needed to enjoy twisties and commute comfortably.
__________________________________________________
Sometimes it's the journey that teaches you a lot about your destination. ~Drake Check out my Appalachian Trail journal, 2015! Postwhores are COOL! ~Allyson |
|
March 26th, 2014, 07:31 AM | #72 |
ninjette.org member
Name: Rick
Location: Boston
Join Date: Oct 2013 Motorcycle(s): Ninja 300 Posts: 13
|
Whatever happened with these?
|
|
March 26th, 2014, 08:33 AM | #73 |
The A Team
Name: Aufitt
Location: Western Australia
Join Date: Aug 2012 Motorcycle(s): Z50, CB125, RZ500, MC22, R3. Posts: 394
|
Here is a set I made for the cbr, with a simple gearshift rod extension.
And how to do it in this thread- http://www.cbr250.net/forum/cbr250-p...vements-5.html |
|
March 26th, 2014, 10:06 AM | #74 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
you doing this? sweet
|
|
March 26th, 2014, 10:11 AM | #75 |
The A Team
Name: Aufitt
Location: Western Australia
Join Date: Aug 2012 Motorcycle(s): Z50, CB125, RZ500, MC22, R3. Posts: 394
|
|
|
March 26th, 2014, 04:54 PM | #76 |
Ninja chick
Name: Allyson
Location: Athens, GA
Join Date: Jun 2009 Motorcycle(s): '13 Ninja 300 Posts: A lot.
Blog Entries: 4
MOTM - Dec '13, Feb '15
|
I vouch for them. @alex.s installed these on my 300. They are working wonderfully, street and track! Great manufacturing work!
__________________________________________________
Sometimes it's the journey that teaches you a lot about your destination. ~Drake Check out my Appalachian Trail journal, 2015! Postwhores are COOL! ~Allyson |
|
March 26th, 2014, 05:22 PM | #77 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
how to buy then?
|
|
March 26th, 2014, 08:28 PM | #78 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I'm planning on designing and manufacturing these myself too. But a gonna take me at least a month to get everything in place. Gonna make a bunch of other stuff as well. How are you making the template? Water jet or something else?
|
1 out of 1 members found this post helpful. |
March 28th, 2014, 08:38 PM | #79 |
Disavowed
Name: Chris
Location: Charleston, SC
Join Date: Aug 2012 Motorcycle(s): '07 EX250 Posts: 22
|
Looks like the discussion focuses on 08 or newer 250's and 300's, will this work or be available for pregen 250's? Thanks
|
|
March 30th, 2014, 08:42 AM | #80 |
ninjette.org member
Name: Joshua
Location: wellington
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250r Posts: 41
|
Well if it fits on 08~ 250r I would love to get one of this.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adjusting Throttle Cable - Barrel adjusters and Throttle body adjusters are maxed out | theob | 2008 - 2012 Ninja 250R Tech Talk | 10 | July 19th, 2012 05:01 PM |
CHEAP....Rear seat cowl, front cowl, rear sliders, LED MIRRORS | joes280 | Motorcycle-related | 11 | April 27th, 2012 09:42 PM |
Cheap ass rear sets | ztrack157 | Motorcycle-related | 4 | October 8th, 2009 01:05 PM |
Rear set adjusters...cheap! | Tubesock | 2008 - 2012 Ninja 250R Tech Talk | 4 | May 31st, 2009 08:34 PM |
Thread Tools | |
|
|