March 26th, 2020, 02:36 PM | #1 |
ninjette.org newbie
Name: D
Location: Colorado
Join Date: Dec 2018 Motorcycle(s): Ktm duke 690, drz400sm, 2006 ninja 250 (almost fixed), 2008 ninja 250 (WIP) Posts: 2
|
Vacuum line
2008 ninja that I bought all torn apart and I'm trying to put back it together. On the carb there is a t fitting (not between the coasting enricher) I believe one side goes to the small port on the petcock but not sure where the other side goes. Any help would be appreciated!
|
|
March 26th, 2020, 03:49 PM | #2 |
ninjette.org newbie
Name: D
Location: Colorado
Join Date: Dec 2018 Motorcycle(s): Ktm duke 690, drz400sm, 2006 ninja 250 (almost fixed), 2008 ninja 250 (WIP) Posts: 2
|
Of course I just stumbled on the answer by accedent after thoroughly researching. Apparently it goes to the kleen air system. Mite as well get rid of that while I'm at it.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vacuum-Less Petcock | ninjunk | 1986 - 2007 Ninja 250R Tech Talk | 14 | August 24th, 2023 11:30 AM |
Loose vacuum line. Major backfire. | lockdun1 | 2008 - 2012 Ninja 250R Tech Talk | 4 | October 13th, 2014 01:33 PM |
Where do these vacuum hoses go? | blackss06 | 2008 - 2012 Ninja 250R Tech Talk | 2 | April 11th, 2014 03:42 AM |
Gas and Vacuum line maintenance? | ProdigyRacingLA | 2008 - 2012 Ninja 250R Tech Talk | 4 | March 11th, 2014 10:16 PM |
Fuel in Vacuum line | headshrink | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 23rd, 2011 03:29 PM |
Thread Tools | |
|
|