July 28th, 2011, 07:50 AM | #1 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
13t front sprocket
anyone know if the front sprockets are interchangeable from the pregen to the new gen? i cant find a 13t front sprocket anywhere for the newgen, only the pregen, even the dealer doesnt show a listing. only one i can seem to find http://www.amazon.com/JT-Sprockets-F.../dp/B00316Y402
__________________________________________________
#1 |
|
July 28th, 2011, 08:53 AM | #2 |
ninjette.org Monkey Spank
Name: Kevin
Location: Illinois
Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.
|
As far as I know yes, with a shim.
__________________________________________________
Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket |
|
July 28th, 2011, 09:00 AM | #3 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
I thought I read somewhere that the 13t sprocket can cause excessive chain wear due to the diameter of the sprocket being so tight. Hopefully they were wrong and you'll be fine switching.
__________________________________________________
|
|
July 28th, 2011, 10:03 AM | #4 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
i read a post on a different forum through google searching from kkim saying he was gonna try a 13t.. the post looked like it was from 2008 so maybe he can chime in.. im gonna order it since its only $15 shipped.. ill post back with the results once on.
__________________________________________________
#1 |
|
July 29th, 2011, 04:09 AM | #5 |
Ninjette wanabe :D
Name: Ruslan
Location: San Jose
Join Date: Apr 2011 Motorcycle(s): white 300 :D Posts: A lot.
|
Should be great if you ride city only id think.
__________________________________________________
VROOOM vrooom >.> |
|
July 29th, 2011, 06:11 AM | #6 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
i do about 0 miles in the city
__________________________________________________
#1 |
|
July 29th, 2011, 11:08 AM | #7 |
ninjette.org certified postwhore
Name: Eric
Location: Murfreesboro, TN
Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.
|
Why you want to go down in size, when everyone always seems to want to go up in size?? (just curious, if ya will)
PS- off topic, but meaning to ask since seeing a pic of your windscreen mod... where the hell are your front turn sig's? |
|
July 29th, 2011, 11:09 AM | #8 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Wait, we still talking about sprockets?
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
July 29th, 2011, 11:15 AM | #9 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
I'm larger then the average 250 rider so I need to go down not up .. and front turns are some flushmounts I got at cycle gear .
__________________________________________________
#1 |
|
August 2nd, 2011, 05:08 PM | #10 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
ok, so i got the 13t sprocket today.. ordered it from amazon the link is in my first post, now the sprocket i recieved has the correct part# stamped on the sprocket, but the sprocket itself is completely different then what i need or even pictured in the link from when i purchased, i emailed the company and havent herd back yet.. im confused now if i got a wrong sprocket or the 2007 and older ninjas arent the same front??
VV... this is what is showed and what the center should look like to fit..
__________________________________________________
#1 |
|
August 2nd, 2011, 09:12 PM | #11 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
One shim should do you fine. I have the same counter sprocket, only with 15T. Yes, it is the one for the pre-gens, but that is why the shim. I have run mine for about 2 years that way with no problem. Your RPMs are going to run HIGH on the freeway, but if that work for you, that is all that is important.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
August 2nd, 2011, 09:16 PM | #12 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
I gotta get them to send me the right sprocket first .. what are you using for a shim?
__________________________________________________
#1 |
|
August 2nd, 2011, 09:20 PM | #13 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Part# 92200A at bikebandit.com (or other retailers). You will find this part under the transmission section of the parts fiche.
This is a splined washer that is used inside your transmission, but is also the perfect shim (also what I use).
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
August 2nd, 2011, 09:26 PM | #14 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
Cool thanks
__________________________________________________
#1 |
|
August 3rd, 2011, 09:35 AM | #15 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
well found out why the 13t i got wouldnt fit, ended up being for a honda! amazon.com has wrong info.. the correct part# for the pre gen front 13t sprocket from jt sprockets is JTF516-13.. for future reference.
__________________________________________________
#1 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEW PitBull 13T Front Sprocket for 250r / Ninja 300 | 1ER6F | Motorcycle-related | 6 | July 11th, 2014 11:16 PM |
Set Me Straight on 13T Front Sprockets | Outlander Systems | 2008 - 2012 Ninja 250R Tech Talk | 6 | September 8th, 2011 08:04 PM |
Front Sprocket | Archerzz | 1986 - 2007 Ninja 250R Tech Talk | 66 | June 29th, 2011 10:22 AM |
13t Sprocket. | indr | 2008 - 2012 Ninja 250R Tech Talk | 2 | February 16th, 2011 03:25 PM |
Anyone find a 13T countershaft sprocket? | RaceBikeRentals | General Motorcycling Discussion | 3 | January 27th, 2010 09:14 PM |
Thread Tools | |
|
|