January 27th, 2016, 09:56 AM | #1 |
ninjette.org member
Name: _
Location: _
Join Date: Jan 2016 Motorcycle(s): 250R Posts: 83
|
Newgen vs pregen handlebar
Are these interchangeable? I'm on the market for a right one for my '12 and I see the pregen are much cheaper
Thanks |
|
February 6th, 2016, 09:25 PM | #2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Bump for more info (I believe they are different)
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
February 7th, 2016, 07:40 AM | #3 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
They are very different unfortunately, PreGen uses a two piece set-up, riser and bars are separate, NewGen is one piece.
Here's the models the NewGen fit, hope this helps you out. 2008 EX250J8F Ninja 250R HANDLEBAR (J8F) 2009 EX250J9F Ninja 250R HANDLEBAR (J9F-JAFA) 2009 EX250J9FA Ninja 250R HANDLEBAR (J9F-JAFA) 2010 EX250JAF Ninja 250R HANDLEBAR (J9F-JAFA) 2010 EX250JAFA Ninja 250R HANDLEBAR (J9F-JAFA) 2011 EX250JBF Ninja 250R HANDLEBAR 2011 EX250JBFA Ninja 250R HANDLEBAR 2012 EX250JCF Ninja 250R HANDLEBAR 2012 EX250JCFA Ninja 250R HANDLEBAR 2013 EX300ADF Ninja 300 HANDLEBAR 2013 EX300ADFA Ninja 300 HANDLEBAR 2013 EX300BDF Ninja 300 (Canadian) HANDLEBAR 2013 EX300BDFA Ninja 300 ABS HANDLEBAR 2014 EX300AEF Ninja 300 HANDLEBAR 2014 EX300AEFA Ninja 300 HANDLEBAR 2014 EX300AES Ninja 300 HANDLEBAR 2014 EX300AESA Ninja 300 SE HANDLEBAR 2014 EX300BEF Ninja 300 ABS HANDLEBAR 2014 EX300BEFA Ninja 300 ABS SE HANDLEBAR 2014 EX300BES Ninja 300 ABS HANDLEBAR 2014 EX300BESA Ninja 300 ABS SE HANDLEBAR 2015 EX300AFF Ninja 300 HANDLEBAR 2015 EX300AFFA Ninja 300 SE HANDLEBAR 2015 EX300AFS Ninja 300 HANDLEBAR 2015 EX300AFSA Ninja 300 SE HANDLEBAR 2015 EX300BFF Ninja 300 ABS HANDLEBAR 2015 EX300BFFA Ninja 300 ABS SE HANDLEBAR 2015 EX300BFS Ninja 300 ABS HANDLEBAR 2015 EX300BFSA Ninja 300 ABS SE HANDLEBAR
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
1 out of 1 members found this post helpful. |
February 7th, 2016, 07:55 AM | #4 |
ninjette.org member
Name: _
Location: _
Join Date: Jan 2016 Motorcycle(s): 250R Posts: 83
|
Besides the two piece difference, do the holes match to use one or the other? I'm guessing no but that's my original question
|
|
February 7th, 2016, 08:18 AM | #5 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Even if they do, the fork tube diameter's are different. Pre gen has a 36mm fork tube while the new gen fork tube is 37mm
|
|
February 7th, 2016, 08:25 AM | #6 |
ninjette.org member
Name: _
Location: _
Join Date: Jan 2016 Motorcycle(s): 250R Posts: 83
|
Oh right, the handlebar sits on top of it. Clearly they won't cross fit.
Thanks |
|
February 9th, 2016, 12:55 PM | #7 |
Chaplain
Name: Charlie
Location: Toledo
Join Date: Nov 2015 Motorcycle(s): 75 RD350 race bike, 82 XZ550RJ Vision, 81 XV920RH, 89 VTR250 Interceptor race bike, 06 Concours, 86 EX250E1 Posts: 153
|
I have an 86 EX250 which has 35mm forks, and I swapped some 36mm forks onto it to fit a 17" front wheel. Being 1mm difference, which is only .020" radius, i found that the 86 handlebars were a tight fit, but with a small amount of sanding the paint off the inside of the handlebars at the fork caps, they both fit. You may want to get a set and try them, not sure if they bolt up the same, but the 86-87's were the same, or close enough to fit the 88-07 fork upper triple tree with a little sanding of the paint inside where the tube fits.
__________________________________________________
God chose what the world thinks foolish to shame the wise,what the world thinks as weak to shame the strong,what is despised in the world,what is nothing,to set aside what is regarded as something |
|
February 9th, 2016, 02:55 PM | #8 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
As for the bolt holes for mounting them, they are just a little diffrent length apart, just enough to not let them swap.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newgen Ignition on pregen help. | Hasersys | 1986 - 2007 Ninja 250R Farkles | 5 | November 11th, 2015 04:22 PM |
Newgen exhaust on pregen? | !!(0_o)!! | 1986 - 2007 Ninja 250R Tech Talk | 26 | April 16th, 2013 08:26 PM |
pregen engine in newgen? | alex.s | 2008 - 2012 Ninja 250R Tech Talk | 6 | October 19th, 2012 11:09 PM |
Are the newgen and pregen cranks the same? | n4mwd | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 26th, 2012 12:27 PM |
Pregen vs. Newgen | ambudriver | General Motorcycling Discussion | 7 | May 7th, 2011 07:36 PM |
|
|