May 12th, 2018, 08:02 AM | #1 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Hot Bodies Race Fairings
new in box, still in primer (no tail)
race upper race lower race front wheel I was going to mount the front and cut it for headlight, but found a decent condition replacement set and went with that just to get back to riding instead of constantly on jack stands. I used the rear tail...I'd be willing to part with it if you have a complete OEM black or red rear tail setup to swap me. the race tail is cut for OEM tail light and already trimmed for bolt on fitment. The other pieces were unboxed once and put back in...they will require minor cut/trim to fit each bike. new MSRP was 699 plus the shipping. looking to get 250 for the panels I have, or same with trade. this is how the tail looks with a couple hours of fitment dialing in. takes some patience, but these are nice pieces |
|
May 12th, 2018, 08:03 AM | #2 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
I forgot to mention...in case the thread does not send me a notification, email me directly to contact me:
chris.reiser.rn@gmail.com Thanks |
|
May 21st, 2018, 10:13 AM | #3 |
ninjette.org newbie
Name: Adam
Location: Olathe, KS
Join Date: Apr 2017 Motorcycle(s): EX300B, TL1000R, R6, GSXR1000 Posts: 2
|
Interested, sent you an email.
|
|
May 21st, 2018, 10:29 AM | #4 |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
Adam, if this falls through another member ( @Bigballsofpaint ) is also selling some newgen 250 race glass.
.
__________________________________________________
I am NOT an adrenaline junkie, I'm a skill junkie. - csmith12 Nam et ipsa scientia potestas est. Heri historia. Cras mysterium. Hodie donum est. Carpe diem. |
|
May 21st, 2018, 11:07 AM | #5 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
I forgot to mention that I also have the race front fairing stay that I will include with purchase. It’s an aluminum lightweight unit that is also brand new in box
|
|
May 21st, 2018, 05:06 PM | #6 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Still available he needs 13-18 Ninja 300
Some pics for you guys |
|
May 30th, 2018, 03:03 PM | #7 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Bump
|
|
June 7th, 2018, 05:39 AM | #8 |
ninjette.org certified postwhore
Name: Ant
Location: Wooster
Join Date: Dec 2013 Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD) Posts: A lot.
|
The "race fairing front stay" you have, that is to remove the headlight correct? Will it allow mounting of the gauges? My wife is converting her 250 into track only so this would be perfect.
|
|
June 7th, 2018, 06:07 AM | #9 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Yes the fairing stay (bracket) is the first picture in post 6. It bolts to the steering stem then the new nose/front race fairing. The race fairing has no cutout for a headlight as it is a race fairing. Most people just zip tie the stock cluster to this fairing stay until they can afford to purchase a Koso or other cluster
|
|
June 21st, 2018, 03:22 AM | #10 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Bump
|
|
June 22nd, 2018, 08:04 PM | #11 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
is that front fairing stay for the 250R? and is it still available?
|
|
June 22nd, 2018, 09:48 PM | #12 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Yes and yea
|
|
June 26th, 2018, 01:15 PM | #13 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
bump
|
|
May 14th, 2019, 02:47 PM | #14 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Bump
|
|
June 17th, 2019, 09:22 PM | #15 |
ninjette.org newbie
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019 Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo Posts: 8
|
did this sell?
|
|
June 18th, 2019, 06:29 AM | #16 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Still have them, got bored and mounted them to bike so now holes are drilled nice fitment. Also reinforced all holes with aluminum backer. Drilled hole for single round street headlight, easily reversible I kept the cutout. Let me know if you want pics
|
|
June 18th, 2019, 06:47 AM | #17 | |
ninjette.org newbie
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019 Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo Posts: 8
|
Quote:
yeah man def interested. |
|
|
June 18th, 2019, 08:02 AM | #18 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
I have not mounted the belly pan yet but test fitted it, fits nice how I have the main fairing done. The headlight “bucket” is detachable. I kept the cutout so it could be re glassed closed quickly and made this plexiglass cover for it for street use. The headlight bucket and projector headlight would be included in sale
The rx2n knockoff cluster and the wiring (plug and play) could be included along with the mount to the headlight fairing bracket at additional cost |
|
June 18th, 2019, 04:21 PM | #19 | |
ninjette.org newbie
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019 Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo Posts: 8
|
where are you located and what are you thinking shipping would be to 78620?
Quote:
|
|
|
June 18th, 2019, 06:04 PM | #20 | |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Quote:
Most of the quotes I have gotten people are $150 to $250. You get hammered in dimensional weight edit: Box is 22x23x40. Weight is about 10lbs, but dimensional weight really increases that. I could probably cut the box down a few inches in each direction since no tail, but not sure that's worth compromising the contents over. fiberglass in shipping needs a lot of packing material Last futzed with by 95PGTTech; June 19th, 2019 at 12:22 PM. |
|
|
June 18th, 2019, 08:04 PM | #21 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Here's a great way to ship large packages: http://busfreighter.com
Only catch is it's not door-to-door; have to go pick up at bus station. I recently shipped 4x BBS race-wheels and 6x tyres cross-country for $156. |
|
June 19th, 2019, 12:25 PM | #22 | |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Quote:
I'd imagine Hot Bodies has some sort of commercial account (it shipped fedex) where they get massive discounts for a high volume of shipments with them. I can't see them eating $150/set. |
|
|
June 20th, 2019, 12:56 PM | #23 |
ninjette.org member
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102
|
Sold
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08-12 Ninja 250 Hot bodies fairings | Bigballsofpaint | Motorcycle-related | 8 | July 9th, 2018 05:14 PM |
for those with the hot bodies undertail | greatwhiteninja | 2008 - 2012 Ninja 250R Farkles | 8 | October 7th, 2011 02:21 PM |
Hot bodies under tail install | Highalltheway | 2008 - 2012 Ninja 250R Tech Talk | 8 | August 16th, 2011 03:01 PM |
|
|