August 11th, 2018, 04:11 PM | #1 |
ninjette.org member
Name: Mark
Location: La crosse
Join Date: Jun 2018 Motorcycle(s): 06 ninja 250r, 82 yamaha xj750 Posts: 37
|
06 250r idle issues
So after all the help I got with getting my bike running I figured I’d reach out again. Since finishing the previous work of cleaning and replacing the main jets, my bike idles at a high 5-7 and if left idling without riding it will overheat. I already have been messing around with the idle adjustment knob and it does nothing, this have something to do with the idle mixture screws?
|
|
August 11th, 2018, 08:33 PM | #2 |
ninjette.org member
Name: Tim
Location: Inland, NE
Join Date: Apr 2018 Motorcycle(s): 2007 Ninja 250 Posts: 48
|
Check to make sure the throttle cables are adjusted properly. If too tight the cable will not allow the throttle to be adjusted by the idle speed knob.
|
|
August 11th, 2018, 11:17 PM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Is this high-idle with or without choke on?
|
|
August 11th, 2018, 11:24 PM | #4 |
ninjette.org member
Name: Mark
Location: La crosse
Join Date: Jun 2018 Motorcycle(s): 06 ninja 250r, 82 yamaha xj750 Posts: 37
|
|
|
August 12th, 2018, 05:38 AM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Vacuum leak.
An engine will only run at speed dictated by ingested air, no more, no less. Check around boots for incomplete seating and/or rips or holes. |
|
August 19th, 2018, 04:02 AM | #6 |
ninjette.org member
Name: Mark
Location: La crosse
Join Date: Jun 2018 Motorcycle(s): 06 ninja 250r, 82 yamaha xj750 Posts: 37
|
I did have a previous problem with that before.. I will be taking off my tank and checking over vaccum seals, throttle, ect. I will be on with an update later today
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Idle issues | Matthew243301 | 2008 - 2012 Ninja 250R Tech Talk | 1 | February 15th, 2018 03:41 PM |
Idle issues - Idle is different every time I start up. | 106 | 1986 - 2007 Ninja 250R Tech Talk | 6 | November 13th, 2014 04:57 PM |
idle issues | jgcable | 1986 - 2007 Ninja 250R Tech Talk | 9 | July 30th, 2014 03:13 PM |
Idle/running issues | SDninja | 1986 - 2007 Ninja 250R Tech Talk | 15 | August 19th, 2010 02:09 PM |
Idle issues | Gyrene | 1986 - 2007 Ninja 250R Tech Talk | 15 | May 4th, 2010 11:43 AM |
|
|