ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old November 29th, 2018, 08:37 AM   #1
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
Ninja 300/250 Parts - Racetech PCV Exhaust ETC

PM with an email address for photos. Prices include CONUS shipping except for bodywork and gas tank.

Should fit at least 2008+ 250/300:

Spears Racing no-drill Toe Sprocket Chain Guard Shark Fin - $40 (some small scratches, but otherwise great; required for some racing organizations and good to have in general; Spears lists it for both 250 and 300)

PSR SBK footpegs for OEM rearsets - $20 (some end scuffs; huge upgrade from OEM footpegs for 08+ 250/300)

Set of ebay replica OEM rearsets - $35 (brand new in the bag; these are complete OEM replacements, including shift and brake levers; buy with the PSR footpegs for $50)


Rest below are probably 300 only:

Healtech GIPro DS gear indicator plug and play - $55 (casing has scuffing and cable has a small patch section where the shielding wore through, but functions perfectly)

Woodcraft under fairing frame sliders - $40 (sliders have scuffing but are 95% there; bolt has a small bend at the tip, does not affect installation)




For local pick up (Orange County, CA) or shipping extra:
Catalyst Composite Fairings - $150 (has damage that needs to be repaired; right side of tail needs a patch; right side of the front fairing needs a patch; one of the mounting tabs on the front is half broken )

Black gas tank - $80 (no dents; one corner of the tank had a scuff and was repainted with an off-color black; has stomp grip grips and will include a set of the lower fairing stomp grips; no fuel pump or gas cap)

_____________
Exhaust - SOLD
PCV - SOLD
PVC map switch - SOLD
Front suspension - SOLD
R&G Racing Engine Case Cover Set - SOLD
Yoshimura Rearset risers - SOLD

Last futzed with by Mechanikrazy; January 8th, 2019 at 12:30 AM. Reason: update for 250 usage
Mechanikrazy is offline   Reply With Quote




Old November 29th, 2018, 10:18 AM   #2
AwDang
ninjette.org guru
 
Name: Pat
Location: SW VA
Join Date: Feb 2015

Motorcycle(s): 286, 296, 599, 799

Posts: 436
is that for the complete forks? if so I'm interested along with the Yosh risers
AwDang is offline   Reply With Quote


Old November 29th, 2018, 10:50 AM   #3
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
Quote:
Originally Posted by AwDang View Post
is that for the complete forks? if so I'm interested along with the Yosh risers
No, it is the internal components. Emulators, springs, predrilled damper rods, and preload adjusters.

If you're still interested in anything, send a PM if you want photos or payment info.
Mechanikrazy is offline   Reply With Quote


Old December 4th, 2018, 06:19 PM   #4
snot
sammich maker
 
snot's Avatar
 
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012

Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded)

Posts: A lot.
MOTM - Apr '15
Free bump...
__________________________________________________
https://www.ninjette.org/forums/attachment.php?attachmentid=32634&stc=1&d=1412045508
https://www.brocksperformance.com/VZ...0035+C450.aspx
snot is offline   Reply With Quote


Old December 7th, 2018, 03:05 PM   #5
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
Quote:
Originally Posted by snot View Post
Free bump...
Thanks

Also, 10% off ebay today with PHLDAYTEN so you can save some extra money.

The Power Commander and the Exhaust are up there!

PCV
https://www.ebay.com/itm/223272589164
Two Brothers Full Exhaust
https://www.ebay.com/itm/223272593154
Mechanikrazy is offline   Reply With Quote


Old January 4th, 2019, 10:52 AM   #6
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
Bump with price drops!
Mechanikrazy is offline   Reply With Quote


Old April 14th, 2019, 09:09 PM   #7
Sirena
ninjette.org member
 
Sirena's Avatar
 
Name: CJ
Location: Oregon
Join Date: Mar 2015

Motorcycle(s): Ninja 300, GSXR 600, CBR 500

Posts: 20
Hello! do you still have the shark fin?
__________________________________________________
~ The way to go fast is to never slow down ~
Sirena is offline   Reply With Quote


Old April 29th, 2019, 10:30 PM   #8
Mechanikrazy
ninjette.org guru
 
Mechanikrazy's Avatar
 
Name: Al
Location: Orange County, CA
Join Date: Dec 2015

Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold)

Posts: 263
Update as I cannot edit the original post anymore. PM with an email address for photos. Prices include CONUS shipping except for bodywork and gas tank.

Should fit at least 2008+ 250/300:

PSR SBK footpegs for OEM rearsets - $20 (some end scuffs; huge upgrade from OEM footpegs for 08+ 250/300)


Rest below are probably 300 only:

Healtech GIPro DS gear indicator plug and play - $55 (casing has scuffing and cable has a small patch section where the shielding wore through, but functions perfectly)

Woodcraft under fairing frame sliders - $40 (sliders have scuffing but are 95% there; bolt has a small bend at the tip, does not affect installation)




For local pick up (Orange County, CA) or shipping extra:
Catalyst Composite Fairings - $120 (has damage that needs to be repaired; right side of tail needs a patch; right side of the front fairing needs a patch; one of the mounting tabs on the front is half broken )

Black gas tank - $60 (no dents; one corner of the tank had a scuff and was repainted with an off-color black; has stomp grip grips and will include a set of the lower fairing stomp grips; no fuel pump or gas cap)

_____________
Exhaust - SOLD
PCV - SOLD
PVC map switch - SOLD
Front suspension - SOLD
R&G Racing Engine Case Cover Set - SOLD
Yoshimura Rearset risers - SOLD
Rearsets - SOLD
Shark fin - SOLD
Mechanikrazy is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? PartsNinja Motorcycle-related 75 October 23rd, 2016 04:08 PM
WTB: PCV for Ninja 300 ULW Items Wanted 0 June 30th, 2016 02:50 PM
PreGen -- Full race suspenson (Fox Racing, RaceTech) $300 NealWright Motorcycle-related 9 April 18th, 2016 11:36 AM
Ninja 250 parts for sale + Muzzys exhaust extremez31 Motorcycle-related 13 May 14th, 2013 12:52 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 07:20 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.