February 16th, 2019, 03:26 PM | #1 |
Total Noob
Name: Dallin
Location: Cedar Hills, UT
Join Date: Jul 2018 Motorcycle(s): 2005 Kawasaki Ninja EX250R Posts: 4
|
Where can I find OEM 2005 Ninja EX250R Indicator + Mounting Plate
Hey all,
Dark times this winter. I live in Utah where half the year looks like a freakin Ice Age. I decided quite stupidly that I would take my bike to work while there was sludge and snow. The main roads were clear, my neighborhood was not. I laid the bike down and completely decimated my left turn signal. I bought a "OEM" replacement off amazon but it did not fit. But by the time I realized it wasn't going to fit it was about 11 PM and I had to be at work 6 AM the next morning and my motorcycle was my only ride. So after mutilating the mounting plate trying to get the indicator to mount to the fairring, I did the redneck thing and super glued it. Now, several months later, I'm looking into selling the bike to buy a new one but I feel like a dick selling it with a super glued light. The problem is I cannot seem to find an ACTUALLY OEM Left indicator AND mounting plate replacement. Anyone know where I can get any and all OEM parts? I got a Ninja EX250R from 2005. Any advice is appreciated. Thank you all in advance! |
|
February 18th, 2019, 03:05 AM | #2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to pre-gen tech
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
February 18th, 2019, 07:42 PM | #3 |
ninjette.org member
Name: Mark
Location: Golden State
Join Date: Jun 2018 Motorcycle(s): 04EX250F Posts: 12
|
Not sure which ones need replacement. Front or rear. Regardless, I went to eBay for oem, but certain parts such as front turn signals with their base plate don't seem to come up often as the rear ones.
If you can't wait and want to go to once source, check out https://www.kawasakipartshouse.com/o...x250-f19-parts Brand new oem parts aren't cheap though. |
|
February 18th, 2019, 10:41 PM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
If plate is in one piece, you can replace just the light part.
Or remove light and shave down remaining stalk base off plate. Bolting flattened plate back onto fairing lets you use many aftermarket lights with backing washer under plate. I've even used rear turn-signals from my VF500 on front of pre-gen this way. Ebay: https://www.ebay.com/itm/132953103032 |
|
February 19th, 2019, 06:51 AM | #5 |
ninjette.org member
Name: Gian
Location: Ireland
Join Date: Jan 2019 Motorcycle(s): 2008 Ninja 250R Posts: 19
|
Partzilla has what you need. They have them in stock. You'll need an account to see the price and stock on some of them. https://www.partzilla.com/catalog/ka...9/turn-signals
Rear turn signals about $35 each Front signals about $22 each |
|