May 22nd, 2019, 08:31 AM | #1 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
Wtb rh control housing assembly.
for my 2012 250. I'm talking about the black housing with on/off/ignition buttons on the right handlebar. the small plastic pin that holds the assembly into the bars broke recently.
I did a small fix hoping it'd stay but it wouldnt. Can't justify the 110$+ price im finding for a new one. hoping someone would have one lying around for cheap. Thanks! |
|
May 24th, 2019, 09:19 AM | #2 |
CCS Amateur #501
Name: Dave
Location: Iowa
Join Date: Jun 2015 Motorcycle(s): '09 250 SE 'Booger' Posts: 406
|
Ebay, my friend. Ive bought a few. Of course theres no guarantee a used one would have the pin intact. Ive used a few wraps of electrical tape on the bar under the switch housing as well with success. Just make sure the throttle still snaps shut.
|
|
May 24th, 2019, 07:02 PM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
I've drilled tiny hole into base of that broken pin.
Then screwed in tiny screw with a head about same size as hole in handlebar. |
|
May 28th, 2019, 07:01 PM | #4 |
ninjette.org newbie
Name: Dave
Location: Edge of Sanity
Join Date: May 2019 Motorcycle(s): Suzuki Gsxr 7/1216, kawasaki z1000, Triumph Speed Triple, 250 ninja Posts: 6
|
+1 for the electrical tape fix.
majority of my bikes have this cos i like to switch out handlebars and i've never had an issue with them moving Last futzed with by GM1216; May 28th, 2019 at 07:03 PM. Reason: adding to original reply |
|
May 28th, 2019, 10:36 PM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Gaffer tape works better than electrical tape if you don’t want permanent fix. It’s not as compressible and not as slick.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Housing Control Assembly issues | zhuuka | 2013 - 2017 Ninja 300 Tech Talk | 4 | November 27th, 2015 05:19 PM |
WTB - Housing Assembly Control - Back Plate | zhuuka | Items Wanted | 0 | November 22nd, 2015 01:53 PM |
|
|