November 15th, 2009, 09:53 PM | #1 |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
Went down on GMR (pics)
Going down GMR im going down this corner (pics below) and honestly not really sure what happened. I was looking "through the turn" and definitley missed the huge patch of dirt that was there and im pretty sure I also hit a rock. Anyways before I know it Im sliding down the street but I was only going 30-35mph tops. Thankfully I was wearing my brand new leathers and boots for the 1st time and I came away without any damage but my bike did not fare so well. Scratched fairing, bar ends, front brake lever, engine case. Front forks leaking oil, dent in the rim and a flat front tire (although im assuming the air just got out).
Even more messed up part: We're on the shoulder and I call AAA to pick the bike up. We go down to eat because the guy says he would take about an hour. I get a call from the AAA guy and he says CHP is towing my bike. I go to the impound lot 10 miles away and pay $200 to get it out. The reason CHP impounded ? - "VISUAL HAZARD", a bike 5+ feet off the shoulder for 50 minutes is impounded because its a "visual hazard". bullsh!t seriously. So then I go to the lot, pay the $200 and then have AAA tow it to one of the riders because he know's someone who will fix my bike up for cheap. So that's that. Hopefully all that i need is new fork seals and a new or fixed rim. picture time... Ill post some pics of the suit tomorrow. Nothing too bad. Dent in the rim Last futzed with by andrewexd; December 5th, 2009 at 07:08 PM. |
|
November 15th, 2009, 10:02 PM | #2 |
FORMER MOTORCYCLE RIDER
Name: Steve
Location: On a Trek SU200 or in my CRX
Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758
|
You just got this bike.
Glad you geared up and walked away! |
|
November 15th, 2009, 10:06 PM | #3 |
The Sexy Filipino
Name: Jordan
Location: Bakersfield, Ca
Join Date: Dec 2008 Motorcycle(s): Ninja 250R 2008 (da black one) Posts: 312
|
Glad your okay. Good for you for wearing your gear. Out of curiosity, how long have you owned the 250 before you sold it?
__________________________________________________
Area P CF Standard,Airbox Removed,K&N R-0990,Factory Pro Jet Kit 3.0, Zero Gravity DB I'm not riding too fast... I'm flying too low. |
|
November 15th, 2009, 10:32 PM | #4 |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
thanks guys. I had the ninja for 5 months, 5k miles and had about 1.5k on the GSXR.
|
|
November 15th, 2009, 10:34 PM | #5 |
So slow I'm first!
Name: Sunny
Location: San Jose, CA
Join Date: Oct 2008 Motorcycle(s): 06 Kawasaki Ninja EX250 Posts: A lot.
Blog Entries: 10
|
Glad your okay Andrew!
__________________________________________________
Learn from the mistakes of others, you cannot make them all yourself. Save yourself the trouble and Learn. |
|
November 15th, 2009, 10:38 PM | #6 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
Hey glad your ok. Sounds like the fork might have to be straightened. Def have it inspected at least.
|
|
November 15th, 2009, 10:44 PM | #7 |
"Is that the Ninjer 1000?
Name: Ken
Location: SoCal SGV
Join Date: Nov 2008 Motorcycle(s): 2008 Quarter Liter Kawi Posts: 275
|
Glad you finally bought leathers. I've never seen so many people wearing jeans at GMR.
__________________________________________________
My Mods |
|
November 15th, 2009, 11:37 PM | #8 | |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
Thanks sunny
Quote:
me too, I didn't feel a thing when I got up but Im sure i'll feel it in the morning I was kinda suprised too, I've ridden with ocmoto a few times and usually they are geared up. I guess this was supposed to be a "cruise" because the organizers were riding 2 up (3 of them). You (and anyone in socal) should ride with us too, nice people. A guy named Agustin organizes alot of the rides. |
|
|
November 15th, 2009, 11:59 PM | #9 |
I'm lovin' it.
Name: Mike
Location: Melb, Australia
Join Date: Feb 2009 Motorcycle(s): '09 Black 250R Posts: A lot.
|
Tough luck mate. Glad to hear that you A-Okay, but dam... such a nice bike too!
__________________________________________________
Son: When I grow up I want to ride a motorbike. Father: You can't do both son. |
|
November 16th, 2009, 01:14 AM | #10 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
|
|
November 16th, 2009, 05:08 AM | #11 |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
I told you that bike was toooo much for you.
Rocks will jump out in front of you when you're on a GSXR. Will's Rim Repair in Greenville, SC can fix that rim. Glad you're OK now get a scooter!
__________________________________________________
If everything seems under control; you're just not going fast enough! |
|
November 16th, 2009, 05:38 AM | #12 |
ninjette.org member
Name: Marsha
Location: tampa
Join Date: Oct 2009 Motorcycle(s): 2009 Ninja 250 Posts: 76
|
Sucks about the crash & the impound! Most importantly, glad that you are alright!
|
|
November 16th, 2009, 07:37 AM | #13 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Visual Hazaard = $200? Sorry to see your bike like that and hope you ain't too banged up.
|
|
November 16th, 2009, 11:54 AM | #14 | |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
Quote:
lol thank you CC cowboy, for the vote of confidence . Have a cage for now. and thanks marsha and bob here are the leathers. My helmet didn't touch and nothing on the gloves either. both arms, most of the damage in the first pic that was a new puck those were new toe sliders |
|
|
November 16th, 2009, 12:14 PM | #15 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Leather FTW. My God, if you had been wearing jeans....
|
|
November 16th, 2009, 12:28 PM | #16 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Glad to see that you are ok and that the gear did its job.
|
|
November 16th, 2009, 12:35 PM | #17 |
.
Name: rock
Location: greenville, south carolina
Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.
|
There was a whole lotta road rash prevented by that gear
|
|
November 16th, 2009, 02:26 PM | #18 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Bummer Dude! Good your OK, hope you get her fixed up soon.
Lucky you weren't with your bike when the CHP came. Couple friends got tickets when they went down. Failure to control vehicle on mountain road. Total BS after wrecking there bikes......... |
|
November 16th, 2009, 05:51 PM | #19 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
sorry to hear about your crash - be thankful that your puck looks like that rather than your kneecap! Hope you learned some lessons from this so that you can avoid repeating this type of thing...
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
November 20th, 2009, 08:18 PM | #20 |
ninjette.org guru
Name: dawn
Location: portland, or
Join Date: Sep 2009 Motorcycle(s): 08 ninja 250r modded, 73 honda cl200, 74 kawasaki 400 triple Posts: 255
|
|
|
November 20th, 2009, 08:40 PM | #21 |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
like cowboy would say crashing sux. seems like minor damage to the leathers compared to what it would of been if you werent wearing the proper gear. glad your ok.
__________________________________________________
I'm not small, I'm fun sized |
|
November 20th, 2009, 10:07 PM | #22 | |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
thank you guys, and gals
Quote:
forks: |
|
|
November 21st, 2009, 06:31 AM | #23 |
That's me!
Name: TJ
Location: Ames, IA
Join Date: Nov 2008 Motorcycle(s): 2008 Ninja 250r (Tis blue), 2008 CBR600RR Posts: 454
|
Yeah some of those turns on GMR catchy you by surprise sometimes. I'm pretty sure it's that one (although about 5-6 of those turns look identical) is the one I've drug my pegs on the way up (on a couple of occasions). It's very disconcerting and I couldn't imagine doing it WITHOUT boots with toe sliders. One time It kicked my foot back and the peg drug through the whole turn. I thought I was going to crap myself
The leathers are FTW. When I finally chunked it down in S.D. on a similar road my pucks and toe sliders showed some grinding, but otherwise not a scratch on me. It takes those 15 mph (although on the bike you're taking them at 30-35mph) spills as a snack |
|
November 21st, 2009, 06:33 PM | #24 |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
Andrew, just out of curiosity what kind of tires did you have on your bike when this happened?
__________________________________________________
I'm not small, I'm fun sized |
|
November 21st, 2009, 06:52 PM | #25 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
andrew, sorry to hear about your crash. glad you were wearing your gear.
maybe you can use this accident as an excuse to replace your taped up mirror. |
|
November 21st, 2009, 08:20 PM | #26 | |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
Quote:
Im pretty sure they were stock bridgestone bt014's. |
|
|
November 22nd, 2009, 06:11 PM | #27 |
Geeket
Name: Terri-Lynn
Location: Newfoundland
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250R Posts: 175
|
My heart sunk a little bit when I read the title, glad you're ok!
__________________________________________________
bike++; |
|
November 22nd, 2009, 08:57 PM | #28 |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
^ thanks Ordered the forks, lower triple and the wheel. Got a little extra Yoshi exhaust on the side and now I just need to get the parts and a new front wheel.
|
|
November 23rd, 2009, 02:13 PM | #29 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Glad YOU'RE OK. Someone has to say it right. We are vastly outnumbered in this thread.
|
|
November 23rd, 2009, 08:52 PM | #30 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
December 5th, 2009, 07:08 PM | #31 |
ninjette.org guru
Name: Andrew
Location: LA
Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415
|
got my bike back today runs great. Im not gonna post pics since nothing changed cosmetically. I bought a yoshi TRC slip on but Im going to put that on later. total cost of failure :
front wheel- 180 front forks and lower triple - 180 front tire - $88 Labor - $120 + 20 for mounting tire Total: $588. The plastics are in surprisingly good shape considering the damage. |
|
December 5th, 2009, 10:46 PM | #32 |
ninjette.org member
Name: m
Location: metro area
Join Date: Mar 2009 Motorcycle(s): 2009 black Ninja 250R Posts: 177
|
Thank goodness you wore your leathers. Glad you are ok!
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
07' Ninja 250 Farkles (pics pics pics) | instinct | 1986 - 2007 Ninja 250R Farkles | 4 | April 15th, 2014 06:26 PM |
Turbo'd 2008! pics! pics! pics! Dyno run video! | TheDuck | 2008 - 2012 Ninja 250R Tech Talk | 38 | September 19th, 2013 08:28 PM |
Gmr 5-31 | ninja250 | Ride Reports | 16 | June 5th, 2010 09:04 PM |
gmr 4-18 socal | diablo250 | Ride Reports | 1 | April 19th, 2010 06:19 PM |
GMR w/ ARC 3-13-10 | ninja250 | Ride Reports | 12 | March 19th, 2010 08:31 PM |
|
|