January 20th, 2020, 11:39 PM | #1 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Swapping in a 500 engine
I know i'm about to catch criticism for even mentioning the forbidden engine swap But i'm doing it. And there's nothing you can do to stop me. So, for any of you that want to follow along, I will do my best to keep updated and document as much as I can in the build.
The people and companies that have done this swap in the past have never really documented it well, and my goal is to do exactly that. I know it's "pointless", but it's a winter project. Here is a link to the first video, if you want to follow my progress subscribe and keep an eye open. https://www.youtube.com/watch?v=AWEw...ature=youtu.be Please bear in mind the series is designed for a more casual viewer, but there has been a LOT of planning and technical work gone into this already and I will be more than happy to answer those questions and get extra pictures, etc, for any that are interested in the more intricate details. |
1 out of 1 members found this post helpful. |
January 22nd, 2020, 03:49 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hey, awesome video!
Not sure why it’s shunned, doubling power to 60-bhp with just 20-lbs weight-gain is great upgrade. You’re still 40-lbs lighter than EX500 in street trim or 100-lbs light in race config. And you get faster-than-Ninja-400 speed without having to deal with EX500’s wet-noodle frame and Cadillac touring suspension settings. Part of disdain probably has to do with how it’s been done previously with hacking up frame and rewelding motor-mounts. Along with flared-out bodywork zip-tied together due to using EX500 exhaust. Here’s my recommendation for no-cut EX500 swap: 1. Motor supported by factory mounts using spacers in rear. One conversion was done this way about 6-yrs ago. You can weld-up an adapter piece that connects front of engine to bottom of factory mount. Much cleaner looking and 100% reversable. Not sure why anyone would want to go back to 250 anyway. Just cleaner from design and implementation POV to not chop up frame. 2. Custom exhaust 2-1 header. Similar to new-gen’s exhaust and run it past oil-filter underneath engine. Be sure to give filter enough clearance so it can be removed. Running exhaust under engine like 250 lets you put factory bodywork back on. 3. Connect 250 tach to left coil like in 250. Connecting it to igniter like in 500 will give you incorrect RPM readings. 4. Use 500 radiator. Make some custom mounts and attach to factory motor mounts like with 250 radiator. Looking forward to seeing more of your project! |
|
January 24th, 2020, 10:33 AM | #3 |
ninjette.org member
Name: Cyril
Location: no-town
Join Date: Aug 2019 Motorcycle(s): Ninja 250 EX x2, 07" CBR600RR, 09"SFV 650 Gladius Posts: 29
|
That's a freaking awesome project! I honestly wouldn't do it myself, because then I would have to learn some more crap and there isn't much support for it. My question is... why not just get the bigger bike? probably would be cheaper and more economical route as in time and money. Unless you just happen to find the parts for cheap or had them laying around.
|
|
January 24th, 2020, 03:19 PM | #4 |
ninjette.org member
Name: Joe
Location: Provo
Join Date: Sep 2019 Motorcycle(s): 2007 Ninja 250R + 2001 Ninja 500R = 666 PreGen500BMF Posts: 62
|
Awesome bro, my 500 swap is in its final stages and I'll almost be sad when its done. Haha. Been enjoying the hell out of the whole process.
__________________________________________________
We can rebuild her...07Ex2fifty |
|
January 24th, 2020, 10:54 PM | #5 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
@DannoXYZ, Thanks for the reply. 40 pounds was about the numbers I came up with too, haven't bothered weighing things so far but I might compare to a stock EX250 and EX500 when done (I have access to both). from my estimates and calculations, if I can make about 60 BHP (I will be doing a port and polish and building of the engine, as well as intake, exhaust, and AFR tuning, so I think 60 isn't unreasonable at all for a healthy engine), that should put me around the 330 bhp/tonne range which is about the same as the ninja 650. Motor mounts, I will deal with. But I have access to a TIG welder at least if I do need to modify. And bodywork, if it ends up slightly flared out like i've seen I will 3D print and colour match an adapter plate. However I will be fabricating an exhaust to try to avoid this.
Engine mounts: This is the first solid advice i've seen/heard on that front so I really appreciate it and will take that into consideration. Exhaust: I plan on attempting to fabricate a dual exhaust that goes out the right side of the bike, with two cans. I really like that look. I think there will be space to do it since it is a hanging engine. I would like to build an X pipe instead of the 500's "H pipe" style, Where an O2 Bung will be welded into the middle of the X pipe for my wideband. My only concern is placement of the X pipe, I think unfortunately the oil filter may interfere with the design. But I don't mind removing my exhaust to change oil filter, I honestly don't care. Worst case scenario I will build a 2-1 system. Tach: I'm working on something custom for the gauge cluster to hold my wideband and display everything I want to, so the stock tachometer will not be used anyway Rad: I was actually hoping I could get away with the 250 rad. Opinions? I will be running an ECT sensor to monitor and if the cooling isn't adequate could add the 500 rad later. But looking at them it really doesn't seem much smaller. |
|
January 24th, 2020, 11:07 PM | #6 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
@justanotherone1 Thanks for your support. To answer your question... I'm pretty dumb, that's really about it lol. It would 1000% be cheaper to buy a 500. In this process I actually bought a perfectly running, healthy young 500, and then tore it down to this. ninja.jpg (It was actually cheaper than any crashed parts bike I could find around here and I knew it would be in better shape.) So yes, in every way shape and form it would be easier and cheaper to buy a 500. but a couple reasons: 1, the 250 is prettier. just a bit too slow. The 600's look nice, but insurance is expensive in Ontario. 2, I really needed something motorcycle related to keep me occupied for the very long cold winter here so that I don't go crazy, and I enjoy wrenching. and 3, there's not much for custom bikes around here and I really enjoy experimenting and showing what I can do on my own bike, it gets me customers and lots of other work and allows me to network with some cool people.
@JmcEx2fifty Awesome man! feel free to DM me if you want to swap contact info and if either of us are running into issues or something we can compare notes. The modification never stops for me so i'm not too worried about it ending lol. |
|
January 25th, 2020, 06:11 AM | #7 | |
ninjette.org member
Name: Cyril
Location: no-town
Join Date: Aug 2019 Motorcycle(s): Ninja 250 EX x2, 07" CBR600RR, 09"SFV 650 Gladius Posts: 29
|
Quote:
|
|
|
January 25th, 2020, 07:42 AM | #8 |
ninjette.org sage
Name: John
Location: Appleton, WI
Join Date: Apr 2015 Motorcycle(s): Ninja 300 (race), Ninja 1000 (road) Posts: 504
|
Looked at your topic, came in here hoping to see a CR500 engine dropped in... But this is ok too. Good luck. The Ninja 500 is a good engine that doesn't get the respect it deserves, and cheap too.
__________________________________________________
Ninja 300 - CCS Ultralight Thunderbike Racing I want to "like" your post but I can't due to forum rules. Sorry. |
1 out of 1 members found this post helpful. |
January 25th, 2020, 03:41 PM | #9 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
Lap-records has 250 1-sec faster than EX500 at Thunderhill and 3-sec faster at Sears Point. Now with double power, 250 should pull away even more. With 500 swapped 250, at track I was fastest in B-group beating all other 600 & litre bikes. In A-group, I’m still faster than all 600 bikes due to superior braking and cornering. My next step is further weight reduction. Will build custom frame along lines of A•N•D bikes with perimeter trellis frame. Should be able to shave off another 45-lbs. Now were looking at 285-lbs with 60-bhp! |
|
1 out of 1 members found this post helpful. |
January 25th, 2020, 04:17 PM | #10 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
In terms of the handling characteristics, the ninja 500 is okay, i have ridden one a few times but never hard. The wheelbase is about 1.5" shorter on the 250, and the fork angle is a little bit more tucked under the bike, so it turns in a bit quicker, feels a bit more supersport like. The suspension is similarly not great on either of them. Overall the 250 just handles a little bit more sporty, the 500 feels a little more toury. In terms of a 500 swapped 250 with normal geometry, I would imagine it would feel pretty similar to the ninja 250 with a real heavy backpack, lol. it's an extra 30-40 pounds, but it is weight that's low in the chassis and close to it's natural center of gravity, so I think it'd feel pretty normal. But because I will be drag racing mine It will actually be lowered, so adding the extra weight and changing the geometry, i'm not sure exactly how it'll feel. Hopefully not horrible, but worst case i'll just use it for racing and nothing else. we'll just see what happens! like you said they are kind of disposable bikes. which is unfortunate, until you want to buy more of them, then it's kind of nice haha. Don't even get me started on insurance lol. I just pay liability. $2800 for the year. 1 speeding ticket for 15 over, and only 2 companies in Ontario that'll insure me. the ticket comes off in May so hoping i'll be able to shop around and get something a bit cheaper. Maybe $2000, that would be a pretty good deal for here. Thanks for the support! |
|
|
January 25th, 2020, 04:34 PM | #11 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
@DannoXYZ That's some awesome numbers! As much as I love the twisties, this one will spend at least until August set up as a drag bike, probably with a little street time. Unfortunately there's no tracks near me at all besides for drag racing, so I won't get to play with it that way unfortunately. I do love getting my pegs down though so, we'll see. Also here's a link to the last video, "In today's episode we're talking about the function and purpose of PAIR valves (or Air Injection System), an emission control device, as well as making block off plates to disable this system. This is an easy and cheap mod to do at home so go ahead and break out the tools and follow along with this one!" https://www.youtube.com/watch?v=J15mTZohr2c&t=2s |
|
|
January 27th, 2020, 11:47 AM | #12 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
I do lots of trackdays and there are many summer days at Thunderhill that hit 46C and i see coolant temps creeping over 110C. I’m actually looking at curved radiators from some of bigger bikes to install. |
|
|
January 27th, 2020, 06:19 PM | #13 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
|
|
|
January 27th, 2020, 09:26 PM | #14 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Episode 2 is out. Not much relevance to the ninja 250 side of things, but for anyone interested, figured i'd keep updated.
"In today's episode we're talking about the function and purpose of PAIR valves (or Air Injection System), an emission control device, as well as making block off plates to disable this system." https://youtu.be/J15mTZohr2c |
1 out of 1 members found this post helpful. |
January 30th, 2020, 08:10 AM | #15 | |
ninjette.org member
Name: John
Location: New Windsor
Join Date: Nov 2019 Motorcycle(s): GSXR 750, GSXR 600, Ninja 400, Ninja 300 Posts: 146
|
Quote:
are still at a disadvantage with bikes with well over 100 HP. Just proves the point, it’s not the bike, it’s the RIDER! NorthernNinja, I am following this build. I wish I had your mechanical skills. Awesome job so far. Last futzed with by JFMNINJA400; January 30th, 2020 at 08:10 AM. Reason: Misspelling |
|
|
January 30th, 2020, 10:17 AM | #16 | |
ninjette.org certified postwhore
Name: Tom
Location: Northern Virginia
Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot.
MOTM - Jan '16
|
Quote:
Starts searching ebay for a CR500 engine...……. …...and they are not cheap! |
|
|
January 30th, 2020, 12:00 PM | #17 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
@VaFish I definitely had the same thought lol. not cheap but a pretty legendary engine in it's own right. |
|
|
January 31st, 2020, 04:19 AM | #18 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
For reference, here’s CR250 engine in Ninja 250. Personally I think engine was mounted in hack way.
http://www.nestreetriders.com/forum/...0/#post1327120 |
|
February 9th, 2020, 07:58 PM | #19 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
Was thinking of building my motor, but this seems like a better idea.
Subscribed |
|
February 9th, 2020, 08:21 PM | #20 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
For $200-300 you can pick up 60-bhp EX500 engine and carbs. Or better yet, aftermarket EFI system for $300-400 more. |
|
|
February 10th, 2020, 02:03 AM | #21 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
I see you're from Brampton? Last I checked NCK Cycle Salvage in Woodstock had a 500 engine and carbs, but you kind of want a full bike (wiring and exhaust are nice to have, as well as just small other parts). Sonic cycle in London had a full roller but they were asking quite a bit for it. honestly Kijiji or facebook marketplace is your best bet. look for something with bent forks or that got rear ended or something and pick it up cheap, they're common bikes. Something to consider though is why do you want to do this? I completely encourage working on/building/engine swapping if it's something you enjoy the idea. But if more that 50% of your desire to do this is for power, I would say it's probably not worth it. just a little insight, i'm trying to do this on a budget and I have the tools and skills required to do all of it myself, and i'm still looking at a projected build price of $2500-3000 (not counting the price of the original 250) by the time i'm done not only the swap, but the instrumentation, tuning, and added safety things that come with adding more power and more weight. That's a very good downpayment on something new or the purchase price of a clean used bike with as much horsepower and better electronics systems. Don't let me discourage you if it's something you really want to do, the reward of building something yourself is great and I wish you luck with it! Just thought i'd give you some things to think about before you get started. Any questions on it just let me know. |
|
|
February 10th, 2020, 09:44 AM | #22 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
If I can get a whole 500 bike for cheap enough then I will do this for sure, I love my 250, and have done a bunch of other work last winter including better braking and full custom suspension. The bike handles so well now that I’m riding it full throttle into most corners. 40hp was the value that I figured would be right for the bike, but to get that from the 250 I would be building a time bomb. 50hp all day sounds like the answer.
I’m a machinist/fabricator by trade, so should have the skills and tools, last year I fit the internals from a zx6r fork to my 250. Now I have compression/re-bound control over a shim stack, paired with gsxr1000 Shock the bike holds the road like rails after dialing it in |
|
February 10th, 2020, 09:52 AM | #23 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
P.S. it doesn’t matter what bike I have I will mod it unless it some collector bike but doubt I would own one of those. Basically I just want something fast enough to require throttle control with out braking all the laws by the time you’re in second gear.
|
|
February 10th, 2020, 11:59 AM | #24 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
That's awesome! I basically have the same exact views. I ride my 250 full throttle through most of the corners around here, a little more power would be great. But i don't want anything to get me arrested either lol. And I always mod everything. I like having something custom. Good to have another fabricator around. I'm looking forward to being able to do the zx6r front end eventually but the budget for this build doesn't allow that. I am going to steel braid cable for the front brake though.
|
|
February 10th, 2020, 02:12 PM | #25 | |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
Quote:
|
|
|
February 11th, 2020, 05:56 PM | #26 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
I didn't actually know the internals were interchangeable. I figured they were a different diameter. That may be more in the budget. Do you have any pictures of that? I was thinking I'd like to do the full front end so I could have dual rotors and stuff. But I could probably find the internals pretty cheap
|
|
February 11th, 2020, 06:19 PM | #27 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
You can pretty much make anything fit when you are a machinist. I don’t think I took any pictures of the mods I had to do, but if you want to chat sometime I could explain what had to be done. You will need a lathe and a mill( or a very good drill press)
|
|
February 11th, 2020, 06:27 PM | #28 | |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
Quote:
The zx6r forks are 46mm and just look huge and out of place in my opinion. |
|
|
February 12th, 2020, 07:19 AM | #29 | |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
Quote:
Definitely helps on a project like this, as does being a Fabricator and having access to all the proper equipment. |
|
|
February 12th, 2020, 12:04 PM | #30 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
Also what rear shock are you using? And as for brakes, I didn't really think dual rotors would be necessary either, and I don't like the idea of adding all the extra weight. I'm going to go to steel braid brake lines to start and a better set of pads. Did you have to change the mounting of the caliper to go with a bigger rotor? |
|
|
February 12th, 2020, 02:21 PM | #31 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
The rear shock is a GSXR-1000, I think it’s 03-04. Softer then stock but about perfect for one-up, takes some modding to get in and you lose the air box.
I kept all the adjustments for the fork, but preload became hight adjustment, and preload is done with washers now. It was a lot of work to keep compression control, could have done it easier if I wanted to take the axle out every time I wanted to adjust, but couldn’t live with that. The bigger rotor came with a mount for the calliper. |
|
February 12th, 2020, 02:37 PM | #32 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
I was actually hoping the rear shock would be a little bit softer, i'm pretty light so that's fine for me, and I won't be riding 2 up on this much if at all. And it won't have an airbox with the 500 engine, just pods. so maybe i'll look into that.
Where did you get the bigger rotor? |
|
February 12th, 2020, 04:17 PM | #33 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
https://www.ninjette.org/forums/atta...1&d=1581549167 https://www.ninjette.org/forums/atta...1&d=1581549167 https://www.ninjette.org/forums/atta...1&d=1581549167 https://www.ninjette.org/forums/atta...1&d=1581549167 https://www.ninjette.org/forums/atta...1&d=1581549167
|
|
February 12th, 2020, 04:38 PM | #34 | |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
Quote:
|
|
|
February 13th, 2020, 01:51 PM | #35 | |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Quote:
|
|
|
February 13th, 2020, 03:39 PM | #36 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
This discussion reminds me of HRC titanium exhaust I got for my VF500 way back in '80s. It came in big box with 37 individual parts. No manual, no instructions on how it goes together. Only thing in box was 3.5x5" index card that said, "cut and weld as necessary"! AHHAHAhahhahahah!!!!
You can make brake-caliper adapter to fit any caliper to any disc-rotor size using rotary table. Here's some threads of interest: https://www.ninjette.org/forums/showthread.php?t=177974 <-- Arashi 320mm rotor https://www.ninjette.org/forums/showthread.php?t=281767 https://www.ninjette.org/forums/showthread.php?t=182732 https://www.ninjette.org/forums/showthread.php?t=305237 Rotary-table will allow you to mill around tube-section of homemade adapter shown with beveled base (or stick bolt through and use CNC lathe). Connection at base of plate should NOT be sharp right-angle like sticking separate tube onto plate. It should be beveled/angled gently at connection. You can easily chop off 150-200gm from those adapters with more optimised design, such as threading adapter itself so you don't need to use nuts on backside. And use hollow CBR chromoly bolts. Here's some pre-made off-the-shelf caliper adapters: https://www.svracingparts.com/store/...kets-p40099954 https://www.rsvracing.com/en/product...250-300-m4-100 Http://amazon.com/dp/B00B10DH7Q Although for racing, I think stock caliper and rotor size works just fine with some grippy pads like Galfer. The steel Galfer floating rotor lasts forever. I'm on my 3rd season with it and there's absolutely zero wear! Last futzed with by DannoXYZ; February 14th, 2020 at 07:17 AM. |
|
February 13th, 2020, 10:23 PM | #37 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
LOL that's too funny. That's awesome, thanks for the resources, i'll probably stick with the stock rotor for now. I'm planning on running Galfer's steel braid lines so I was thinking about trying their sintered pads as well. I'm sure the lines alone will make a large difference though.
|
|
February 23rd, 2020, 10:55 AM | #38 |
ninjette.org member
Name: Jason
Location: Brampton
Join Date: Jul 2019 Motorcycle(s): Ninja 250 Posts: 28
|
When is the next update coming? I’m getting impatient, lol
|
|
February 23rd, 2020, 11:25 AM | #39 |
ninjette.org member
Name: Jordan
Location: Sudbury Ontario
Join Date: Jan 2017 Motorcycle(s): 2010 Ninja 250R Posts: 43
|
Lol, thanks for the support. I definitely want to get it out soon, I'm hoping to get some editing done tonight. There's been a good bit of progress made, but I've got shows this week coming up with my band so we've been rehearsing so much I haven't had time to edit. After that there'll be lots more content flowing though!
|
|
February 23rd, 2020, 06:39 PM | #40 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Following in Greg737's example with Ninja 250 and Bandit 400, it would be cool to see EFI conversion with 500 swap. Then add turbo!
There's 4-part Youtube series with turbocharging EX500. Never finished it appears. Guy's apparently has done numerous other turbo bikes, Hayabusas, ZX10Rs, etc. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ninja 500 engine in a 250 frame | reignman | 1986 - 2007 Ninja 250R Tech Talk | 23 | January 29th, 2019 03:08 PM |
The Ex 500 Engine swap with pics | ztrack157 | 2008 - 2012 Ninja 250R Tech Talk | 219 | July 1st, 2016 09:39 PM |
Shock swapping fitment? | britx303 | 1986 - 2007 Ninja 250R Tech Talk | 4 | June 5th, 2016 07:49 AM |
Swapping parts | james250ninja | 1986 - 2007 Ninja 250R Tech Talk | 10 | May 27th, 2014 03:03 PM |
Custom 09 ninja 250 with ex 500 or 650r engine + others | xXKronicfoolXx | 2008 - 2012 Ninja 250R Tech Talk | 41 | February 13th, 2013 04:12 PM |
|
|