July 27th, 2010, 11:43 AM | #1 |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
Two-finger braking/blipping technique Q
Lately I've been practicing my downshifting/braking technique every time I ride. This of course involves modulating the front brake while blipping the trottle and downshifting at the same time.
Every single article/book I've seen shows the braking being done with the forefinger and middle finger, while the thumb, ring finger and pinky operate the throttle. This feels very awkward to me and I find it hard to modulate the brake properly. I find that if I operate the throttle with my thumb and forefinger, and use the middle, ring and pinky to brake, I'm much smoother and more comfortable. I've got better control of both the throttle and the brake, and have three fingers on the brake as well. This makes perfect logical sense to me. Gripping a cylindrical object with just your thumb, ring and pinky just isn't very secure. If you're at your desk, pick up a stapler and staple some sheets together. The stapler represents your throttle. Do it with just your thumb, ring and pinky... awkward, right? Now do it with just your thumb and forefinger. Better, yes? Or, if you're not at a desk, grab your favorite beverage with the two different grips and you decide which one feels more natural and in control. I can't for the life of me think of a good reason not to do it the way I'm doing it instead of the way the instructions say to do it. Is there one? What's your view? |
|
July 27th, 2010, 12:11 PM | #2 |
ninjette.org member
Name: X
Location: Toronto
Join Date: Apr 2010 Motorcycle(s): 09 Ninja 250 SE Lime Green/Diablo Black Posts: 126
|
I agreed with you when I first started trying this.
Now I've just gotten so used to doing it the way everyone else does, with the ring and pinky. But I'm still not perfect at it, so it's entirely possible that your method is better. I just got used to the awkward feeling, and now it feels perfectly natural. |
|
July 27th, 2010, 12:19 PM | #3 |
ninjette.org guru
Name: dawn
Location: portland, or
Join Date: Sep 2009 Motorcycle(s): 08 ninja 250r modded, 73 honda cl200, 74 kawasaki 400 triple Posts: 255
|
i never read which fingers to use, only the benefit of doing this to make downshifting smoother...when i started practicing this, i naturally did it as your book states...i never thought about it, but it feels normal to me...but we are all different, so of course who cares what the book says, if you found a way that is more comfortable for you, right
|
|
July 27th, 2010, 12:29 PM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Whatever is most comfortable for you and gives you the most secure control over the throttle and brake. There is no "wrong" way if it works for you.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
July 27th, 2010, 12:31 PM | #5 |
ninjette.org certified postwhore
Name: Spooph
Location: Golden, CO
Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot.
MOTM - Oct '15
|
Indeed, the point is to be able to brake smoothly and with constant pressure while blipping the throttle, not which fingers you use. Try various combinations of your preferrence, and pick whichever one works best for you.
__________________________________________________
My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. |
|
July 27th, 2010, 01:03 PM | #6 |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
Yeah, I've reached the same conclusion.
However, since it has been revealed to me that I do not in fact know everything (one of the benefits of age and wisdom), I figured it couldn't hurt to ask. You can learn a lot by asking questions that you think you already know the answers to. |
|
July 27th, 2010, 01:55 PM | #7 |
.
Name: rock
Location: greenville, south carolina
Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.
|
I would smash my index finger if it were behind the brake lever. I would say get used to doing it with the index/middle fingers brake and ring/pinky blip. Your way might get you into trouble.
__________________________________________________
Always get a second opinion because most of these people are makin' this stuff up |
|
July 27th, 2010, 01:55 PM | #8 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
July 27th, 2010, 02:11 PM | #9 |
ninjette.org guru
Name: Jessica
Location: Calgary, Canada
Join Date: Jul 2009 Motorcycle(s): '09 Metallic Diablo Black Posts: 298
|
Does anyone have a video of their hand doing this? Or pictures? I've been trying to figure this out, and there is no way in hell I can operate the brake and the throttle simultaneously... As a result, I'm always using the rear brake while downshifting and that's obviously not the best option.
|
|
July 27th, 2010, 02:33 PM | #10 |
ninjette.org certified postwhore
Name: Spooph
Location: Golden, CO
Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot.
MOTM - Oct '15
|
If I don't have one up by the end of the week Talonne, please bother me about it again...
__________________________________________________
My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. |
|
July 27th, 2010, 02:47 PM | #11 |
ninjette.org sage
Name: David
Location: Wellington, New Zealand
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R in Green! (Sold) Now 2011 Triumph Daytona 675 SE Posts: 564
|
I have found that this come naturally to me with my Daytona, except I only brake with my middle finger and blip with the rest of my hand, the ninja I had to think about it and could never get it right... It maybe the amount the throttle needed to be blipped, I don't know.
__________________________________________________
2008 GREEN Kawasaki Ninja 250R. AreaP Quiet Core Carbon Fibre : 8000k HIDs : Dynojet Jet kit : Double Bubble Windscreen |
|
July 27th, 2010, 02:56 PM | #12 |
ninjette.org guru
Name: Jessica
Location: Calgary, Canada
Join Date: Jul 2009 Motorcycle(s): '09 Metallic Diablo Black Posts: 298
|
|
|
July 27th, 2010, 03:00 PM | #13 |
ninjette.org member
Name: Jerry
Location: California
Join Date: Jun 2009 Motorcycle(s): 2007 EX250 Posts: 178
|
I'd say use the strong fingers for braking
It takes more effort, I can't really brake fully with the "little guys"
|
|
July 27th, 2010, 03:27 PM | #14 |
ninjette.org guru
Name: Anon
Location: Atlanta, GA
Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250 (Blue!) Posts: 488
|
|
|
July 27th, 2010, 04:16 PM | #15 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
The amount of throttle needed to blip the 250 is more than bigger bikes - the position of the stock lever doesn't help.
At least those are my excuses for not being able to rev match smoothly. Still practicing though. |
|
July 27th, 2010, 05:28 PM | #16 |
ninjette.org sage
Name: David
Location: Wellington, New Zealand
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R in Green! (Sold) Now 2011 Triumph Daytona 675 SE Posts: 564
|
It is not possible as a gear down will rev higher than the gear you are currently in (as that is how gearboxes work)
__________________________________________________
2008 GREEN Kawasaki Ninja 250R. AreaP Quiet Core Carbon Fibre : 8000k HIDs : Dynojet Jet kit : Double Bubble Windscreen |
|
July 27th, 2010, 05:36 PM | #17 | |
ninjette.org guru
Name: dawn
Location: portland, or
Join Date: Sep 2009 Motorcycle(s): 08 ninja 250r modded, 73 honda cl200, 74 kawasaki 400 triple Posts: 255
|
Quote:
|
|
|
July 27th, 2010, 07:16 PM | #18 |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
My stock lever comes nowhere near my forefinger even when squeezed hard.
Regarding using the strong fingers... I can pull mighty hard with the three fingers I use to brake. Plenty hard enough. What I can't do is precisely control the throttle with my ring/pinky/thumb, or at least not as well as I can with the far more dextrous forefinger/thumb combination. |
|
July 27th, 2010, 09:38 PM | #19 |
ninjette.org member
Name: Michael
Location: Los Angeles
Join Date: Jul 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 41
|
I feel like I have way better control and feel for the brakes when I use my index and middle fingers. My gloves also have tacky strips on those fingers as well, so it makes it very easy to grab.
As far as blipping the throttle, I'm not advanced enough to do it while braking - but I can definitely see that it would take some getting used to. With that said, once you have the movement down, you wouldn't really need a "feel" for the throttle. I'd argue that the index and middle fingers are more precise fingers - we have way more control over them. I'd reserve those for the squeezing the brake lever, which in my opinion is more important than blipping the throttle. Is there a way to move the brake lever closer to the throttle? That might make it easier. |
|
July 27th, 2010, 11:19 PM | #20 |
ninjette.org guru
Name: Anon
Location: Atlanta, GA
Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250 (Blue!) Posts: 488
|
Not to get too far off topic, but Michael -- that was what dawn was referring to when she said pazzo levers. With pazzos, the distance between the grip and lever is adjustable. I think there are some other alternatives on the market, although I'm not familiar with them.
|
|
July 27th, 2010, 11:29 PM | #21 |
ninjette.org member
Name: Michael
Location: Los Angeles
Join Date: Jul 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 41
|
I saw those, they're pretty sweet. I have an '06 though, I don't think Pazzo makes them for my bike.
|
|
July 28th, 2010, 04:47 AM | #22 | |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
Quote:
1 - Keeping the bike in the power band 2 - Keeping the chassis settled (jerking is bad, smooth is good - when the bike isn't bucking around you've got more control) Done right, you can carry much higher speeds and be in much more positive control of the bike. It's also more fun. |
|
|
July 28th, 2010, 04:55 AM | #23 | |
Cat herder
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009 Motorcycle(s): Aprilia RS660 Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
|
Quote:
Rather than post out of speculation, go out, actually try it and report back. You definitely do need to modulate the throttle as well as the brakes while downshifting and time it all correctly. You don't want to let go of the clutch while the throttle is still open or the bike lurches... you want to let it out while the engine revs are coming back down after the blip. You don't want to alter pressure on the brake as you move the throttle either, or the bike lurches. So with the same hand you're both twisting the throttle AND squeezing the brake lever smoothly, consistently and progressively. Two different motions. It's like this... keep constant, light to moderate pressure on the brake lever. Now, WITHOUT CHANGING THAT PRESSURE, pull in the clutch, blip the throttle while shifting, and let out the clutch IMMEDIATELY after blipping so the engine revs haven't gone too low. If you do it right it'll be turbine-smooth. If you do it wrong it'll be like a bucking horse. |
|
|
July 28th, 2010, 08:55 AM | #24 |
ninjette.org member
Name: Michael
Location: Los Angeles
Join Date: Jul 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 41
|
I tried it. It's more of learning to get comfortable using those fingers when blipping the throttle for me, but I still don't feel like I need a precise feel over it, not as much as I do with the brake or the clutch. I don't get what you mean by modulate the throttle? You're fingers are on the throttle for less than a second. You're just matching revs, you blip accordingly and that's it. It definitely doesn't involve as much control and care as using the front brake.
Like you said, you're moderating the brake pressure - which involves precision, and you're letting out the clutch smoothly - again involving precision. I guess if you feel like you can by as precise with your brake lever using the your middle, ring, and pinky fingers then you're fine with the method you developed. |
|
July 28th, 2010, 08:29 PM | #25 |
ninjette.org member
Name: Steve
Location: Providence, RI
Join Date: Feb 2009 Motorcycle(s): '95 BMW K75 Posts: 188
|
I find (on both the clutch and brake levers) that my index finger ends up extending out over the lever itself - the pressure I apply to both levers is all from my middle and ring fingers.
With that in mind, I usually blip the throttle by actually using the heel of my hand. It's a more difficult motion, because you have to keep the brake pressure steady with two fingers while your whole hand is moving... but I find that I can rev match pretty well that way and don't end up overrevving too much on a downshift. |
|
July 28th, 2010, 10:21 PM | #26 |
Humble Observer
Name: Truong
Location: Augusta, Maine
Join Date: Mar 2009 Motorcycle(s): 2009 Yamaha XT250 Posts: 612
|
I like to throw the rear brake into the mix when downshifting. I keep the throttle steady with my ring and pinky while applying front brake with my index and middle fingers, and put some pressure to the rear brake; just enough to feel it resist the engine. The rear brake helps me spread out the task of braking as a whole so I can put some dexterity into the throttle fingers. It also gives some insurance against lurching forward if you blip too soon, without adequately disengaging the clutch, which is unnerving approaching a busy intersection. I don't know how appropriate this is to the technique being discussed, but food for thought.
__________________________________________________
Everything I post is "IN MY HONEST OPINION". Why is "Parking Lot Enduro" not a thing? |
|
July 29th, 2010, 07:33 AM | #27 |
ninjette.org sage
Name: Marc
Location: Crawfordville, Florida
Join Date: Jan 2010 Motorcycle(s): 2005 Suzuki S50, 2006 Kawasaki Ninja EX250F, 1990 Honda PC800, 2000 Yamaha TW200 Posts: 848
|
Just to throw out something else on here, to make a quick panic stop, not just slowing down, the quickest way to stop (shortest distance traveled) is not to downshift, but pull in the clutch to disengage the engine from the rear wheel and apply both front and rear brakes appropriately.
|
|
July 29th, 2010, 08:11 AM | #28 | |
ninjette.org certified postwhore
Name: Spooph
Location: Golden, CO
Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot.
MOTM - Oct '15
|
Quote:
__________________________________________________
My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. |
|
|
July 29th, 2010, 12:07 PM | #29 | |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
Quote:
Link to article and pictures: http://www.ninjette.org/forums/showp...4&postcount=22 |
|
|
July 29th, 2010, 01:21 PM | #30 |
ninjette.org member
Name: Michael
Location: Los Angeles
Join Date: Jul 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 41
|
Nice posts Jeff. Should we be slipping the clutch for every shift, or only when downshifting? I've been pulling the clutch all the way in for upshifting and downshifting.
|
|
July 29th, 2010, 01:34 PM | #31 |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
In my experience, you do not have to pull in the clutch lever all the way in for either up or down shifts. The wet clutch on the bike is meant to be slipped (friction zone) it is not like a car clutch. I only use two fingers on the clutch when clutching (up and down - I only use all fingers when holding it in at a light). the two fingers left on the grip act as a "stop" so you do not pull the clutch all the way in. A light touch on the clutch really smoothed up my downshifting (and upshifting).
|
|
July 29th, 2010, 01:36 PM | #32 | |
ninjette.org member
Name: Michael
Location: Los Angeles
Join Date: Jul 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 41
|
Quote:
|
|
|
July 29th, 2010, 01:53 PM | #34 |
ninjette.org certified postwhore
Name: Spooph
Location: Golden, CO
Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot.
MOTM - Oct '15
|
Another good way to practice using the clutch lightly is to eliminate it completely. Learn to shift up and down without using the clutch at all, and then add in as much clutch as you need to smooth things out...
To learn to shift without the clutch going up through the gears, keep it below 6K, when ready to shift, let off the throttle, and within 1/2 second to a second, click the next gear up. Downshift, let off the throttle for a brief bit, and while simultenously revving the engine quickly, but not a whole lot, click down into the next gear. I'll try and include this in the video I'm making...
__________________________________________________
My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. |
|
July 29th, 2010, 02:33 PM | #35 | |
ninjette.org guru
Name: Jessica
Location: Calgary, Canada
Join Date: Jul 2009 Motorcycle(s): '09 Metallic Diablo Black Posts: 298
|
Quote:
|
|
|
July 29th, 2010, 03:14 PM | #36 |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
Look here in the video column: http://www.starmotorcycle.com/gallery.html
I cannot open the one titled "Downshifting / Blipping have you confused?" here at work but I bet it has some information that could help. Look at some of the other race track videos and you might see some right hand blipping too. |
|
July 30th, 2010, 09:42 PM | #39 |
ninjette.org certified postwhore
Name: Spooph
Location: Golden, CO
Join Date: Jul 2010 Motorcycle(s): '08 Ninja 250R Posts: A lot.
MOTM - Oct '15
|
I'm no Keith Code, nor is this video instructional, but rather simply illustrational. I said I would make it, so I have. I hope it helps. This was made on my commute to work, and some riding in-town.
Obviously, the big difference between this vid and Code/MCN's video is that this is actually a 250, driven where it's most likely to be driven - the open road.
Link to original page on YouTube.
__________________________________________________
My therapist has 2 wheels and a seat. If you are ever in doubt to my tone, please refer to my avatar. Last futzed with by Alex; July 30th, 2010 at 11:41 PM. Reason: embedded the video |
|
July 30th, 2010, 11:43 PM | #40 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Downshifting & Throttle Blipping | akshay11 | Riding Skills | 90 | May 2nd, 2015 01:20 PM |
wtf is he blipping the throttle?! | alex.s | Riding Skills | 9 | March 7th, 2013 10:33 AM |
Proper Braking Technique | Seananniganss | Riding Skills | 30 | May 17th, 2012 10:31 AM |
Throttle Blipping at Red light/intersection | codestp202 | General Motorcycling Discussion | 64 | April 25th, 2012 01:48 PM |
Blipping while braking | JeffM | Riding Skills | 74 | October 10th, 2011 01:33 PM |
|
|