September 5th, 2010, 02:16 PM | #1 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
Another One Bites The Dust err Road :(
So I went down today I was traveling down a back road around my house (near sleepy hollow for anyone from michigan) and went to turn onto a cross street and hit gravel. The front tire slide out from underneath me at about 15-20mph and slide about 10 feet.
Parts that got damaged (Last Picture Has Blood For Anyone Squeamish): Major Scartches to the Fairing and front flush mount: Rear Fairing Small Scratch: (Crappiest Part) Shift Lever Bent: Parts of me that got hurt: My Knee: I was wearing all my gear but I was wearing regular jeans and not riding pants. My knee was the first thing that hit thats why it was the only thing that got hurt. All in all bad day... now I have to look around for some new fairings and a shift lever. probably replace the shift lever and fairing first then replace the cowling and rear faring this winter.
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 5th, 2010, 02:20 PM | #2 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Youch! Glad you're mostly OK. It's just a bike, and can be fixed right back up. And there's a relevant thread that might require your input...
http://www.ninjette.org/forums/showthread.php?t=25913
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
September 5th, 2010, 03:07 PM | #3 | |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
Quote:
I always wear all my gear when I'm going to crash. Knee looks juicy. Make sure you keep it clean.
__________________________________________________
If everything seems under control; you're just not going fast enough! |
|
|
September 5th, 2010, 03:46 PM | #4 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
Anyway, I had worse injuries from bicycle accidents almost weekly when I was a kid (I REALLY pushed things!) and I really only have a scar on my chin (stiches... WOOO!), a small scar under my left wrist (looks like a "down the street" suicide attempt except it's only about an inch) and a huge but only barely visible circular scar on my right wrist (hair still grows there) to show for all of it. I never even broke a bone. My baby sitter said that my twin brother and I looked like the most abused and bloodied children she had ever seen... and she took care of foster kids (saw a lot of abuse). That said, the same b***h broke my nose when I was 7 (she still believed in physical punishment). So, yeah, I wear my riding pants for longer distances but I am usually in my uniform commuting to/from work with gloves, boots, helmet, and jacket 90% of the time. If I'm hitting the freeway or going someplace over ~50MPH, I'll probably grab the riding pants. |
|
|
September 5th, 2010, 04:27 PM | #5 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Sorry to hear about you going down but I'm glad to see your not too badly hurt. Listen to CC. He gives some good advice.
|
|
September 5th, 2010, 07:36 PM | #6 |
ninjette.org member
Name: Alan
Location: Delaware, USA
Join Date: Jul 2010 Motorcycle(s): '10 Ninja 250 Posts: 221
|
Damn, that sucks. Glad you weren't too banged up.
Were you able to ride the bike home? |
|
September 5th, 2010, 08:22 PM | #7 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Glad to hear you were not too badly hurt.
|
|
September 5th, 2010, 10:33 PM | #8 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
Glad you are mostly alright. That is a reason why I wear knee guards under my pants every ride. Your shift lever bent out in a funny way, might be to much deflection to bend it back to normal and it stays strong as before.
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
September 5th, 2010, 10:47 PM | #9 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
yeah im getting a new one, im not even going to mess with it, and yeah I was able to ride it home, it was hard to shift up because my toe couldn't really get under the lever
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 6th, 2010, 09:37 AM | #10 |
Giggity Giggity
Name: Ryam
Location: San Diego
Join Date: Feb 2009 Motorcycle(s): 08 ninja 250R aka Hiryu Posts: 481
|
The fairing and rear fairing didnt look cracked, you may be able to just sand and buff the fairing to save money cause they are pretty pricey. the shift lever is like 45 bucks oem i think. When I layed mine down I had to replace a left mirror, left foot rest and blinker. I left the fairings with rash and some cracks in em cause I see this bike as a trainer till I upgrade.
__________________________________________________
Facebook DY Fender chop, Danmoto CB slip-on w/baffle, Airbox removed, Kleen-air removed, shimmed needles, Mikuni #117.5 Main jets, K&N RU-1822 air filter pods |
|
September 6th, 2010, 09:44 AM | #11 |
ninjette.org member
Name: Craig
Location: jackson
Join Date: Aug 2010 Motorcycle(s): 2009 R6 Posts: 34
|
Glad you are ok. If you get it fixed MeeShee and I would like to meet up with ya before this season is over. Like some one said, I bet you could buff alot of the rash out. As far as pants go....I will be getting MeeShee and I a pair of kevlar riding pants for next season.
|
|
September 6th, 2010, 10:01 AM | #13 |
Dude, Where's My Car?
Name: Michelle
Location: Jackson, MI
Join Date: Aug 2010 Motorcycle(s): 08 Ninja 250R "Passion Red" Posts: 114
Blog Entries: 3
|
glad you are ok! were you turning and hit the gravel or stopping and hit it? sorry about ur bike tho....
__________________________________________________
Won't U Take Me 2....FUNKY TOWN! |
|
September 6th, 2010, 10:36 AM | #14 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
As some of the people recommended, I would just repair the fairings cause the ones up front are like $600 which is too much (for me at least). When I get the money to buy some color matched paint from colorrite (that place is freaking expensive) I am going to repaint mine. Might start a thread on repainting them too.
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
September 6th, 2010, 10:43 AM | #15 |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
The fairing scrapes add character to to bike . Fix the shifter and ride.
Glad you are ok
__________________________________________________
"I'm the one that's got to die when it's time for me to die, so let me live my life, the way I want to" - Jimi Hendrix Cancer |
|
September 6th, 2010, 12:46 PM | #16 | |
ninjette.org guru
Name: Domagoj
Location: Rijeka, Croatia
Join Date: Aug 2010 Motorcycle(s): Ninja 250r 2009 Posts: 396
|
Quote:
All of it shows that you really ride the bike. My friend has a ducati monster and all he does with it is cleaning, polishing and looking. Its a joke. Mine has scratched fairings and electrical tape reinforced blinker I am glad you are all right! |
|
|
September 6th, 2010, 12:49 PM | #17 |
ninjette.org certified postwhore
Name: Donger
Location: So CAL
Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.
|
Glad YOU are ok. I put a few band aids on my scratched fairings....they're just fairings and they did their job for the most part.
Also...CC gives REALLY REALLY good advice....I have him on my speed dial and he's starting his own talk show soon since Dr. Laura has moved on. |
|
September 13th, 2010, 11:29 AM | #18 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
YAY! no more scratches!
But it still needs the turn signal (which i'm just waiting to dry right now) and the shift lever which is on its way in the mail Also I dont have a picture of it yet but I decided to hang the scratched up fairing on the wall in my garage
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 13th, 2010, 11:44 AM | #19 |
ninjette.org member
Name: Ryan
Location: Orlando, FL
Join Date: Jul 2010 Motorcycle(s): Black '11 ZX-6R Posts: 209
|
A scrapped knee isnt too bad, glad it wasnt worse, also get some sliders man and you should be glad the photons didn't get dinged also.
__________________________________________________
My 250 is mine and mine alone, you may see better you'll definitely see worse but mine, she's one of a kind!!!!btw, SHE'S SEXY!!! |
|
September 13th, 2010, 12:27 PM | #20 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
yup thats my first investment as soon as I get the parts that make her rideable again.
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 13th, 2010, 01:35 PM | #21 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
|
|
September 13th, 2010, 02:46 PM | #22 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
I would but its already cracked from being bent, there is no way I would be able to bend it back without it breaking...
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 13th, 2010, 06:38 PM | #23 | |
ninjette.org certified postwhore
Name: Dave
Location: Michigan
Join Date: May 2009 Motorcycle(s): 2009 Kawasaki Ninja 650RTE & 2009 Kawasaki Ninja 250R (SOLD) Posts: A lot.
|
Quote:
Then Tig weld the cracked area. Let it fully cool. Then use a grinder on the weld and smooth it out. Repaint it with some Walmart black paint, then your GTG!! Where i work at, i can bring it into the shop and have our mechanic help me out, if i was in his shoes! *Wear welding gloves, use a big pair of rubber handled Pliers when bending the metal back into place (not your hands). If you just put the part in a Vise and then started bending it... it will break, like when you bend a paperclip back n forth afew times! By all means though, heating it up with a torch and slowly bending it back, then allowing it to fully Cool, MIGHT NOT be 100% of the original strenght, but its a Start and CHEAP way to attempt to fix it. If you did it this way, once all bolted back on, first test ride around the block so IF it breaks you dont got far to walk your bike home! |
|
|
September 15th, 2010, 11:13 AM | #24 | |
ninjette.org sage
Name: Matthew
Location: Toronto
Join Date: May 2009 Motorcycle(s): 2015 V-Star 950 Tourer (Deep Blue) Posts: 570
|
Quote:
|
|
|
September 15th, 2010, 02:48 PM | #25 |
ninjette.org member
Name: Chris
Location: California
Join Date: Apr 2010 Motorcycle(s): '08 250 Posts: 129
|
pretty sure frame sliders are cheaper than new plastics... something to think about.
|
|
September 16th, 2010, 03:54 PM | #26 |
Stealthy Ninjette
Name: Tofer
Location: E.L. MI
Join Date: Aug 2010 Motorcycle(s): 09' Kawi Ninja 250R Posts: 109
|
Yes... which is why I am buying some asap...
__________________________________________________
09' Stealth Ninja 250R Growler Exhaust, Fender Elim, CF LED rear turns, DIY Flush Mounts, & Red Rim Tape My Ninja's Blog! |
|
September 16th, 2010, 04:59 PM | #27 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
I did witness another board member's low-speed tipover, where the Intuitive sliders did in fact limit damage to the slider and the bar ends with no plastic damage.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Muzzy Exhaust Bites the Dust! | Suki2003 | 1986 - 2007 Ninja 250R Tech Talk | 14 | March 20th, 2015 07:27 AM |
well another one bites the dust | Josh_kcco | Videos | 22 | February 18th, 2014 09:45 PM |
[roadracingworld.com] - Raising Dust In Turn Three At Road Atlanta | Ninjette Newsbot | Motorcycling News | 0 | April 26th, 2012 11:20 AM |
[motorcyclistonline] - U.S. House passes dust bill that would help protect off-road r | Ninjette Newsbot | Motorcycling News | 0 | December 9th, 2011 12:00 AM |
[kropotkin thinks...] - Alstare's Dr Brux Sponsorship Bites the Dust | Ninjette Newsbot | Motorcycling News | 0 | September 27th, 2009 06:10 PM |
|
|