September 6th, 2010, 04:44 PM | #1 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
08' Ninja 250 Parts bike part out *you name the part and price*
Parting out one of my 08 Ninja 250's. Bike ran just fine before being parted out. Below is a picture of how it is now. Willing to sell everything. Have plenty of extras in the garage that are not listed. Either reply or PM me if you want something. Got a decent deal on the parts bike so I am willing to pass that deal on, just make me a decent offer on whatever it is you want/need. Will be selling the harness as one complete item with the ECU separate. The clip-ons are bent, but able to be straightened out. If you want any particular pictures just let me know. Also, no fairings for sale because they all were the super cheap eBay knockoffs and I wouldn't feel comfortable selling them to anyone.
Recently available again: Front and rear rims Upper fairing stay Brakes, Brakes, and more brakes!!! Headlight & Gauges are available Make me an offer!!! Also have: Both seats 2 dented tanks Front & rear brakes EX 500? rim stock gauges 5,2xx miles Complete stock exhaust x 2 ENGINE FRAME Swing Arm ***All Parts Are Stock*** How it sits now Before I stripped her down Last futzed with by BuckyNaked; October 7th, 2010 at 07:42 PM. |
|
September 6th, 2010, 06:57 PM | #2 |
ninjette.org member
Name: Jesse
Location: Kona, Hawaii
Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110
|
im looking for the upper cowling stay. happened to have it?
|
|
September 6th, 2010, 07:38 PM | #3 |
2010 250 Cup Champion
Name: Kristy
Location: Port Perry, Ontario, Canada
Join Date: Jan 2010 Motorcycle(s): 2008 Ninja 250R and 2007 Honda CR150F Posts: 168
|
Pm sent - re: bar ends, tail light cover
|
|
September 6th, 2010, 07:58 PM | #4 |
no joy
Name: Six
Location: Cali
Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408
|
ill buy the gauges - really need the gauge top cover but whut the heck my bikes goin to wifey ... don't know what its worth tho so shoot me a pm wit yer price...
also im looking for front fender and rear brake caliper. oh yeah hurry cause i got the moneie$$ |
|
September 6th, 2010, 08:21 PM | #5 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Front rim $100 shipped?
__________________________________________________
Sportisimoto USA is born. |
|
September 6th, 2010, 10:29 PM | #6 |
Giggity Giggity
Name: Ryam
Location: San Diego
Join Date: Feb 2009 Motorcycle(s): 08 ninja 250R aka Hiryu Posts: 481
|
Got a gear shift lever?
__________________________________________________
Facebook DY Fender chop, Danmoto CB slip-on w/baffle, Airbox removed, Kleen-air removed, shimmed needles, Mikuni #117.5 Main jets, K&N RU-1822 air filter pods |
|
September 6th, 2010, 11:46 PM | #7 |
ninjette.org member
Name: chris
Location: picayune,ms
Join Date: Sep 2010 Motorcycle(s): 93 kawi gpz500 Posts: 242
|
i know you said you wouldnt sell the fairings.. but im looking to try a project out and need experimental plastics.. if you would sell em, how much and is headlight available also?
|
|
September 7th, 2010, 03:42 AM | #8 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Dye - Upper cowling stay is the metal bracket right? If so, I've got it available.
Sixer - PM sent ztrack - Wanna just do an even swap for the GB hugger? Cali - Gear shift lever spoken for already Bama - I'll shoot you a pm tonight with pics of the fairings |
|
September 7th, 2010, 07:31 AM | #9 |
ex-ninjette.org guru :o
Name: Trevor
Location: Barrie, Ontario
Join Date: Jun 2010 Motorcycle(s): 2003 SV1000 S Posts: 475
|
I don't suppose you'd still have the headlight?
I might be interested in it depending on the price, and the cost to ship to canada. |
|
September 7th, 2010, 08:37 AM | #10 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I'm lookin' for rubber bits to replace my rotted ones. I don't know if the rubber bulb over the trip meter reset button can be taken off of the gauge cluster, but mine is now rotted open. Similarly, I don't know if the rubber bit can be removed and installed on the shift lever either but, if so, I can use one of those too. Also, I need that springy rubber bit that sits at the engine side of the clutch cable. Lookin' for any of the non-windscreen well-nuts as well.
|
|
September 7th, 2010, 07:45 PM | #11 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
PM's w/ pics sent.
CZ i'll try tt pry off some bits for ya tomorrow. |
|
September 7th, 2010, 07:56 PM | #12 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
September 8th, 2010, 05:06 AM | #13 |
ninjette.org member
Name: chris
Location: picayune,ms
Join Date: Sep 2010 Motorcycle(s): 93 kawi gpz500 Posts: 242
|
didnt get any pics or pm
|
|
September 8th, 2010, 02:06 PM | #14 |
Pimpin
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973
|
Looking for the rear sprocket carrier (hub). Don't need the actual sprocket, just the hub and the nuts. Thanks.
|
|
September 8th, 2010, 03:30 PM | #15 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
bama - taking pics of plastics and headlight tonight to send to ya
race - If I can get the thing off, $30 shipped reasonable? |
|
September 8th, 2010, 03:33 PM | #16 |
Pimpin
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973
|
Sure, please PM me your paypal address.
|
|
September 8th, 2010, 05:16 PM | #17 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
I'm having trouble getting the bolts off, they're torqued to sh!t. Will WD-40 on em be bad? Or is there a better way to get em off? Even tried my impact wrench.
Just had a brilliant idea, I could just ship it to you with the sprocket on still and you can get em out |
|
September 8th, 2010, 05:34 PM | #18 |
Pimpin
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973
|
Hmmmmm.... I need to be able to replace the sprocket with my lightweight race sprocket, and need the nuts to be in good condition. Any luck getting them off?
|
|
September 8th, 2010, 05:56 PM | #19 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Would probably be easier to use a breaker bar with the rim back on the bike. But no front tire, so that plans out. I'll try and see if my brother can help me go at it. Here's pics as is. The previous owner was a dirt bag to the bike. Not sure if they'd be in decent enough condition especially for a race bike. All the studs look straight though. Only "flaw", other than me not being able to get them off, is the damage the previous owner made while stripping the bolt.
|
|
September 9th, 2010, 09:33 AM | #20 |
Money is a drug.
Name: Chaos
Location: South Jersey
Join Date: Jun 2010 Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP) Posts: 251
|
|
|
September 9th, 2010, 02:58 PM | #21 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
how much is for the clutch cable?
|
|
September 9th, 2010, 03:00 PM | #22 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
$10 shipped decent? That is if I can figure out how to get it off!
|
|
September 9th, 2010, 03:01 PM | #23 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Sounds good. Pm me if you can get it out
|
|
September 10th, 2010, 02:53 PM | #24 |
ninjette.org member
Name: Eric
Location: Richmond
Join Date: Jun 2010 Motorcycle(s): 2010 Ninja 250r Posts: 30
|
Not sure if it's too late, I would like both front and rear wheels quote shipping to Canada V7E5K9. Thanks
|
|
September 12th, 2010, 03:33 PM | #25 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Bizump... Headlight and gauges available... And Multiple chain guards available for cheap... Also, front and rear seats
|
|
September 14th, 2010, 02:22 PM | #26 |
ninjette.org sage
Name: Howard
Location: Cypress, So. Cal.
Join Date: Feb 2009 Motorcycle(s): '09 Candy Thunder Blue Ninja 250R Posts: 618
|
Is the list updated?
I am in need of a front stay and gauges |
|
September 14th, 2010, 10:57 PM | #27 |
ninjette.org sage
Name: Cab
Location: Miami Beach
Join Date: Mar 2010 Motorcycle(s): Blue 10 250r Posts: 697
|
If still available.
I'll take complete left rear set including shift foot lever, $80
Also parts 33040, 33040A and 11012 from here. In swingarm diagram. Left side complete assembly $30. PM me for contact. |
|
September 14th, 2010, 11:08 PM | #28 |
ninjette.org member
Name: mikeJONESS
Location: homeless
Join Date: Sep 2010 Motorcycle(s): 09' 250, 10' 600rr Posts: 11
|
carbs? pm sent
|
|
September 15th, 2010, 03:29 PM | #29 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Cab - Don't have the left rear sets. Have the SA parts, you need both sets? And not quite sure what the left side assembly is...
|
|
September 15th, 2010, 10:59 PM | #30 |
ninjette.org member
Name: mikeJONESS
Location: homeless
Join Date: Sep 2010 Motorcycle(s): 09' 250, 10' 600rr Posts: 11
|
B, money sent via paypal, thanks, S
|
|
September 16th, 2010, 06:09 PM | #31 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Thanks! Got the little rubber bit that covers the trip meter reset button to replace my rotted one.
|
|
September 17th, 2010, 06:49 AM | #32 |
Money is a drug.
Name: Chaos
Location: South Jersey
Join Date: Jun 2010 Motorcycle(s): 2011 ZX-6r, 2010 250r (RIP) Posts: 251
|
Thanks again Brandon, got the frame cap yesterday, totally forgot there were 2 different sizes, luckily you sent the right one
|
|
September 17th, 2010, 08:35 AM | #33 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Glad I got all the right stuff out, enjoy!
|
|
September 17th, 2010, 09:17 AM | #34 | |
ninjette.org sage
Name: Cab
Location: Miami Beach
Join Date: Mar 2010 Motorcycle(s): Blue 10 250r Posts: 697
|
Quote:
It's what I called it. lol. It's the piece that fits inside the swing arm and allows the rear wheel to be spaced. It has a long bolt that goes through rear swing arm cap and has 2 nuts for adjusting tightening. Let me know if this is fair? I'll send you paypal. |
|
|
September 17th, 2010, 09:29 AM | #35 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
Cab - PM sent
|
|
September 20th, 2010, 08:52 PM | #36 |
ninjette.org newbie
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): None Yet Posts: 8
|
Pm sent
|
|
September 22nd, 2010, 08:44 PM | #37 |
ninjette.org member
Name: RIP
Location: nj
Join Date: Jun 2010 Motorcycle(s): have 24 Posts: 53
|
I need the bolt and nut that hold the clutch lever to the clutch perch $8 shipped parcel post to 07645 or $10 shipped priority Rip
Posted via Mobile Device |
|
September 23rd, 2010, 02:20 PM | #38 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
got a pic/diagram of the bolt you need?
|
|
September 23rd, 2010, 05:52 PM | #39 |
ninjette.org member
Name: RIP
Location: nj
Join Date: Jun 2010 Motorcycle(s): have 24 Posts: 53
|
NO,do you have a bike?? Look at the clutch,it's the lever on the left handle bar.Look at what holds the lever to the clutch perch.Thats the bolt.The nut is under the lever and it holds the bolt on from coming up and out.
Posted via Mobile Device |
|
September 23rd, 2010, 06:47 PM | #40 |
ninjette.org member
Name: Brandon
Location: Wichita, KS
Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76
|
I figured that was what you were talking about. Just didn't know what a clutch perch was. But I don't have the OEM one.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? | PartsNinja | Motorcycle-related | 75 | October 23rd, 2016 04:08 PM |
Ordering parts by part number | nitehawk | 2008 - 2012 Ninja 250R Tech Talk | 4 | August 29th, 2013 10:07 AM |
What is a good price for a bike for parts? | ally99 | Motorcycle-related | 10 | February 23rd, 2013 12:17 PM |
Pre Gen Part bike part out | A7xschecter6661 | Motorcycle-related | 28 | July 5th, 2012 12:49 PM |
Front Seat Part Number/Price? | setasai | Items Wanted | 4 | September 1st, 2010 08:07 PM |
|
|