August 19th, 2010, 09:10 AM | #321 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Okay soo, Im a tall white boy @ 6 feet..
I just threw on the Woodcraft clipons and HOLY SHETTT!!! I sat on the bike, drove it around town OMG!!!@#@#$# WTF The bike feels completely different (posture etc.)! I feel like i just bought like a 600cc and was riding around. The feel of the bike feels just waayyyyy better! Wow, this is the greatest modification that you could do to your bike. I cant wait until I sit on it again and go riding. HIGHLY RECOMMEND PUTTING CLIPONS ON YOUR NINJA 250RRRRR!!!!! I am puttin pazzo shortys on later this afternoon and will post pics! |
|
August 19th, 2010, 12:05 PM | #322 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
Here are my new Woodcraft Clipons and the Pazzo Shorty Levers I put on today. The left grip is currently being held by duct tape until i get a new grip..
It was too hard for me to try to remove it so I just put a razor blade to it! So far I am very excited about the new setup! xD Pazzo levers are great btw |
|
August 19th, 2010, 12:14 PM | #323 |
ninjette.org member
Name: Ryan
Location: Orlando, FL
Join Date: Jul 2010 Motorcycle(s): Black '11 ZX-6R Posts: 209
|
I like teh thumbs up in the mirror!!!!
Go Green!!!
__________________________________________________
My 250 is mine and mine alone, you may see better you'll definitely see worse but mine, she's one of a kind!!!!btw, SHE'S SEXY!!! |
|
August 19th, 2010, 12:23 PM | #324 |
ninjette.org member
Name: .
Location: texas
Join Date: Aug 2010 Motorcycle(s): . Posts: 31
|
thanks brotha, i was gonna do a weird smile in the mirror but i decided not to lol. Hmm what next. Double bubble and an exhaust?? xD
|
|
August 19th, 2010, 01:49 PM | #325 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
August 22nd, 2010, 06:15 AM | #326 |
ninjette.org newbie
Name: Wilson
Location: Australia
Join Date: Aug 2010 Motorcycle(s): Kawasaki Ninja 250R Posts: 1
|
Just installed my clip on's
if you don't have a firetorch you can always do what my mates doing to my bike |
|
August 22nd, 2010, 11:10 AM | #327 |
Join Date: Nov 2008 Posts: Too much.
|
um.... no.
|
|
August 22nd, 2010, 03:40 PM | #328 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
Did my clipons today. As always, the hardest part is easy for me but I have trouble with the simple things. The bar ends only took 10 minutes max. I had a minitorch ($15 from lowes) that I used to heat up the loctite. I tried using a cordless drill with a philips 3 bit, but that didn't work at all. I then used my 3/8 ratchet connected to a 1/4 adapter connected to a philips 3 bit. Worked really well and took almost no strength at all!
I had the most trouble removing the grips I tried using my air compressor but it didn't work so well. I ended up just cutting up the grips. I never had to change grips before so didn't realize I could have left the throttle grip on ended up going to cycle gear and got some gel grips. The new grip is about a cm longer than stock and had closed ends so had to cut them out. The bar ends look puny now so will work on getting the stock ones back on. Everything is now back together and I'll test ride it in a few hours when everything dries. Are the levers supposed to hit the windshield when locked left or right (just barely). Also, one of my tubes underneath the throttle looks exposed, so wasn't sure that was normal. Will take a pic when I get a chance. Also, I changed my fork seals last month so now these scratches are exposed |
|
August 22nd, 2010, 06:00 PM | #329 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
I couldn't get a pic of it, but right underneath the boot is where the tube is cut.
Didn't know if this is normal. I did get a chance to test the clipons out. Still higher than what I'm used to, but I'm definitely more leaned forward now. Weirdest change is actually how I steer. With the stock handlebars, I actually pulled the bars in to countersteer (ie pull left handlebar in, go right). With the clipons, I push to steer now since I'm more leaned forward. |
|
August 22nd, 2010, 06:07 PM | #330 | |
ninjette.org member
Name: Ed
Location: NJ
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 157
|
Quote:
|
|
|
August 22nd, 2010, 06:20 PM | #331 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
I actually have the bad habit of one handing about 90% of the time. I'm only 5'8 so it was a lot more comfortable to one hand my cbr and I unfortunately brought that habit to the 250 even though it was upright. I only use my left for parking lot speeds, bumpy roads or lane splitting.
|
|
August 29th, 2010, 12:26 AM | #332 |
ninjette.org guru
Name: Domagoj
Location: Rijeka, Croatia
Join Date: Aug 2010 Motorcycle(s): Ninja 250r 2009 Posts: 396
|
I have a tiny problem with ordering. Here goes.
I live in croatia, and so far i was unable to find any european online store which has any clip-ons at all. And you can forget about local stores, they simply dont order any parts for 250r because it is a rare bike here. So the problem is, shipping from woodcraft is 218$. Thats kind of huuge. I never ever ordered anything from US which cost so much to ship, most of the things were under 50$. Some of them over 1kg. Add up the base price, and then vat and customs (23% + 10% + fixed expenses of around 50$), i will end up paying around 580$. I have been complaining about counting in shipping cost to the base for vat and customs , for about a million times so far, and i simply cant get anywhere with it. Its just as it is. As i can see racebikerentals offers no international shipping. Do you guys know of any alternative? |
|
September 2nd, 2010, 10:02 AM | #333 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
I've only done international shipping once before, but I'd be willing to look into it if you'd consider going through a stateside middleman.
US Postal Service quotes me about $60 for international shipping to Croatia for a box about the size/weight of the box my WC clipons came in. Not sure what customs will do to that price, but seems a bit more reasonable than $218. Of course the downside is they'd have to be shipped to me, then shipped to you, so probably $80 shipping all told.
__________________________________________________
Proud member of the Blue Army |
|
September 2nd, 2010, 10:44 AM | #334 | |
Join Date: Nov 2008 Posts: Too much.
|
Quote:
|
|
|
September 2nd, 2010, 10:55 AM | #335 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
An excellent option, thanks! As I said, not too familiar with international shipping, but happy to look into it. I might even have my original Woodcraft box to measure for fit.
__________________________________________________
Proud member of the Blue Army |
|
September 2nd, 2010, 02:22 PM | #336 | |
Join Date: Nov 2008 Posts: Too much.
|
Quote:
to you for stepping up to help out! |
|
|
September 2nd, 2010, 08:16 PM | #337 | |
ninjette.org member
Name: rick
Location: cape girardeau
Join Date: Aug 2010 Motorcycle(s): 2010 kawasaki ninja 250R Posts: 19
|
Quote:
|
|
|
September 3rd, 2010, 02:36 PM | #338 |
ninjette.org guru
Name: Domagoj
Location: Rijeka, Croatia
Join Date: Aug 2010 Motorcycle(s): Ninja 250r 2009 Posts: 396
|
Reducing the shipping costs from 218 to 80 is a huge step already, thank you for offering help!
I have no idea what will customs do with package either, without the original wrapping, but in the worst case scenario i will get charged vat on ≈ 250$ (at least i think so) which is way better. I will try to find out what happens to packages with no bill/value indicated on the outside. Might take a while, and i will probably get some confusing and unclear answers Last issue is how do i refund you? Cant really pay you with my credit card |
|
September 5th, 2010, 02:47 PM | #339 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
I'll continue over PM, to avoid further sidetrack of the thread.
Very glad to help out a fellow forum member!
__________________________________________________
Proud member of the Blue Army |
|
September 5th, 2010, 02:51 PM | #340 |
Join Date: Nov 2008 Posts: Too much.
|
please let us know how it turns out. |
|
September 17th, 2010, 06:21 AM | #341 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Thanks for the write-up! I have a related question:
Would there be anything wrong with installing the clip-ons on top of the triple clamp, so the riding position wouldn't change much but the front could still be lowered? I ask, because my 5'0" GF is going to be inheriting my 250 when I upgrade. We are already planning on lowering it for her for more comfort and confidence, but I would like to be able to drop the front more than just the 1" option (so we don't have to slam the rear and jack up the steering geometry too much for the same height), at least until she builds enough skill to not worry about dropping it at every stoplight, heh. I don't think she would want the leaned-forward riding position, let alone be able to actually turn the bars :P . It seems like it would be pretty strait-forward. |
|
September 17th, 2010, 07:25 AM | #342 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
Get handlebar risers if you want it above the triple tree. They just install underneath your stock bars and they'll be much cheaper/easier to install (around $60 vs $180).
http://www.cheapcycleparts.com/produ...ers-ninja-250r Lots of different brands make them, but they'll lower the forks about an inch. I'm pretty sure the woodcraft can't be installed above because of clearance issues. |
|
September 17th, 2010, 10:07 AM | #343 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
What I was saying is I want to raise the forks more than just an inch.
What kind of clearance issues would one find, mounting them above the clamps? |
|
September 17th, 2010, 11:46 AM | #344 | |
Join Date: Nov 2008 Posts: Too much.
|
Quote:
You can lower the front as much as you like. The limiting factor would be when the front fender starts hitting the underside of the front cowling at full front suspension travel. Sorry, I don't know exactly how much that is. There are other makers of clip ons that are made to mount above the triple clamps if you are interested in an above triple clamp type of clip ons. I believe Matt sells them. |
|
|
September 17th, 2010, 12:19 PM | #345 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Yeah, I know with the stock bars the amount of lowering is limited by whatever spacer is added under the bar mounts. I didn't want the bars lifted like 3", which is why I was leaning more toward clipons, so that the bar height isn't related to front suspension height.
The reason I wouldn't want to put them under the clamp is because she probably wouldn't be able to reach the bars when they are at or near lock. Hell, she is already at like a 45* angle to reach the bars as they are, haha. But, I guess I will have to look into something else . |
|
September 17th, 2010, 12:26 PM | #346 |
Join Date: Nov 2008 Posts: Too much.
|
You're fortunate that others have introduced alternatives to the WC clipons since I did mine. At least you have a choice now that was not available not too long ago.
BTW, why do you need to lower the front more than lowering blocks will allow? how low do you expect to lower the rear? It's not a 1:1 relation when it comes to lowering front vs rear and lowering more than 1.5" in the rear will usually start causing you clearance problems back there as well. |
|
September 17th, 2010, 01:10 PM | #347 | |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Quote:
Posted via Mobile Device |
|
|
September 17th, 2010, 01:18 PM | #348 |
Join Date: Nov 2008 Posts: Too much.
|
IMHO, you are asking for problems lowering it by that much.
exactly how tall is your wife... or more importantly, what's her inseam? there are other things you can do to help make the bike fit a shorter rider... shave the seat, wear a bit thicker shoe. A little bit here and there will make a big difference overall. personally I would start with lowering the rear 1.5" and the front using lowering blocks. if she needs it lowered more, then look at the other options mentioned. |
|
September 17th, 2010, 03:41 PM | #349 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Sorry, i had a long post but it got mesed up (as you can see). She is 5' tall. I dont know her exact endseam, but at stock height she can baaaarely scrape the tips of both shoes on the ground, heh. I have lowered the rear with straps by about 4" for her to practice in parking lots, and while it obviously helped, she still was a good inch way from flat footing. So really, my goal is just to help her get as comfortable on it as possible, by lowering it down as much as possible. We will probably get her some boots, but I dont want her fumbling with clumsy clown shoes when she is already trying to learn to just stay on 2 wheels lol.
Posted via Mobile Device |
|
September 17th, 2010, 04:02 PM | #350 |
Join Date: Nov 2008 Posts: Too much.
|
a custom Corbin seat can help, too. they can work with you to make the padding thinner in the tank seat junction. They are willing to work with the customer to size/fit the seat in any way they can help. You would need to order directly from the manufacturer, however, and pay full retail on the seat. I have an off the shelf Corbin and for me it makes the riding position and comfort worlds better than stock.... something to consider.
|
|
October 12th, 2010, 12:25 PM | #351 |
ninjette.org member
Name: Lee
Location: Naugatuck, CT
Join Date: Mar 2010 Motorcycle(s): 08 Kawasaki Ninja 250R Blue Posts: 150
|
Just finished my woodcrafts. Install went very smooth using heat to get the old bar ends off.
Only issue I had was getting the inside bolts tightened down but thats due more to my beefy hands then anything else. Impressions after a short jaunt around my condo complex were WOW Sharper cornering and felt alot more comfortable laying it over more. May need some tweaking after a few rides to work but mounting them 6mm down from the triple gives almost full lock to lock. Clutch and brake lever hit equally on the forward fairing but it not unworkable.
__________________________________________________
Mmmm when gone down you have look so good you will not. |
|
October 21st, 2010, 06:33 PM | #352 | |
ninjette.org certified postwhore
Name: Scott
Location: Carlise Ohio
Join Date: Apr 2010 Motorcycle(s): Yahama v star 650 classic Posts: A lot.
|
Quote:
|
|
|
October 31st, 2010, 12:56 PM | #353 |
ninjette.org addict
Name: Jimmy
Location: SoCal
Join Date: Oct 2010 Motorcycle(s): 2010 Ninja 250r Posts: 89
|
Hopefully you dont get too bogged down by all the questions members throw your way... and with me having to ask another about the clip ons... One of the reasons i purchased the ninja 250 was because there was the option to lower the bars and the DIY guide you had posted up made it seem something that was within the realm of my mechanical know how... Anyway, so here my question to you... When you removed the stock bars from the triple tree... were the pipes sticking out above the triple tree? or were they flush? from the looks of all the pictures in this thread most have some pipe sticking above the triple tree... did they all lower their front ends? or is there normally 1/2 inch sticking out above?
|
|
October 31st, 2010, 01:01 PM | #354 | |
.
Name: rock
Location: greenville, south carolina
Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.
|
Quote:
__________________________________________________
Always get a second opinion because most of these people are makin' this stuff up |
|
|
October 31st, 2010, 01:09 PM | #355 |
Join Date: Nov 2008 Posts: Too much.
|
the fork tubes stick up about 1/2-3/4" above the triple clamp's top surface under the stock handlebars. If you remove one of your stock handlebars you will be able to see exactly how much. Really easy to do... two bolts per side.
sorry, I don't have any pics of the tubes sticking out of the triple clamps in the stock configuration. |
|
October 31st, 2010, 01:11 PM | #356 |
ninjette.org guru
Name: Dude!!
Location: Southern California
Join Date: Dec 2009 Motorcycle(s): 2009 250r Posts: 443
|
As Rock mentioned, the forks do stick out from factory. The bottom of the stock bars are hollow to accomodate the part of the fork that sticks out.
|
|
October 31st, 2010, 03:30 PM | #357 |
ninjette.org addict
Name: Jimmy
Location: SoCal
Join Date: Oct 2010 Motorcycle(s): 2010 Ninja 250r Posts: 89
|
Thanks everyone for the quick replies !! when the clip ons arrive I'll give'em a go and see how it all turns out... I cant say this enough, but this forum is, hands down, the most informative and welcoming group I've come across !!
|
|
November 17th, 2010, 03:20 PM | #358 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
For those of you who are great at stripping bolts like I am, I finally found replacement bolts. I've gone to ace hardware, lowes, and home depot with no luck and even checked the woodcraft website. The bolts have to have the same Allen head or else they won't fit correctly (I put some hex bolts in that wouldn't screw in completely and they fell out apparently).
I happened to walk by these bolts at cycle gear and they are exactly the same size. The size says M6x20 and it's 3 bolts for $1.99. |
|
November 17th, 2010, 07:26 PM | #359 |
.
Name: rock
Location: greenville, south carolina
Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.
|
how did you decide on which bolt to not use?
__________________________________________________
Always get a second opinion because most of these people are makin' this stuff up |
|
November 17th, 2010, 09:24 PM | #360 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
The cycle gear guys are pretty cool people and lent me tools to take a bolt out of my bike. The packages easily open so I tested a bolt that looked the closest to mine. They fit perfectly and then I bought the bolts.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Are woodcraft clipon bars hollow? | ninja2007 | Ninjettes At Speed | 11 | October 1st, 2014 08:36 PM |
Woodcraft clipon height question | Colezombie | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 12th, 2011 01:45 AM |
Clipon Vortex or Woodcraft? | JaeL | 2008 - 2012 Ninja 250R Tech Talk | 16 | August 16th, 2009 05:26 PM |
woodcraft clipon towers | gizmogamez | Ninjettes At Speed | 5 | July 22nd, 2009 02:45 PM |
|
|