October 12th, 2010, 05:58 PM | #1 |
ninjette.org member
Name: Steve
Location: Cumberland Plateau
Join Date: Aug 2010 Motorcycle(s): KLR 650, XT250, KLX250s, 09 Ninja 250, KT250, Beta 250, Scorpa 250, Sherpa T 350, Penton Jackpiner 175, IT425 Posts: 35
|
Braking effect, fork brace and placement of the caliper
We returned home tonight from an extended wkend ride through NC, TN and VA via various well known roads. While riding on 129 I really noticed a phenomenon when braking which prompts the following questions. Under heavy braking while setting a corner, the bike tries to stand itself upright, I know this is partly the function of physics. At the same time I feel what seems to be the forks flexing as the Ninjettes only have one front disc. These are not something I notice on our larger Ninjas, I assume partly because of the stiffer front forks and dual disc brakes.
My question is, does anyone make a fork brace for the 250, has anyone used one and found these to be beneficial? Also, is there a reason that the caliper mounts behind the axis of the front wheel rather than in front? Behind the wheel seems to magnify the torquing of the forks under heavy brake load because of the direction of rotation of the front wheel. This in effect tries to pull the wheel up off the ground under braking. If the caliper mounted in front of the wheel axis, would that not transfer the brake force down toward the ground, increasing tire contact and reducing the torque transferred to the forks? |
|
October 12th, 2010, 06:45 PM | #2 |
ninjette.org certified postwhore
Name: Greg
Location: Rhode Island
Join Date: Apr 2009 Motorcycle(s): 2013 ZX6R 636 Posts: A lot.
|
I've wondered whether there is any impact on caliper placement (relative to fork leg) as well. Google search returns this thread, LOL
|
|
October 12th, 2010, 07:01 PM | #3 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
I rode the US 129 and some other roads in that area recently. I think the flexing you feel may be in the way the front springs and suspension are set up. A little firmer front spring or heavier oil and re-valving could fix the problem. They do make fork braces, but they mainly use them for dirt bikes because of they shock load they get. As far as the brakes calipers being mounted on the backside of the fork is probably because of the amount of force that is put on the mounting points. Force is being pushed into the (cheap) shock tower as opposed to being pulled away form it. The 250 is a simply designed yet very functional bike. Anything else would cost more money. Just my
|
|
October 12th, 2010, 07:11 PM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
there is already a "fork brace" under the front fender.
|
|
October 12th, 2010, 07:21 PM | #5 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
That's a front fender brace assy. I think he means something like this. http://www.superbrace.com/simulation.html
|
|
October 12th, 2010, 07:23 PM | #6 |
Join Date: Nov 2008 Posts: Too much.
|
I know, but they still perform the same function in tying the forks together.
|
|
October 12th, 2010, 07:34 PM | #7 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
True. But I'm wondering if it is as effective as the superbrace.
|
|
October 12th, 2010, 07:40 PM | #8 |
Join Date: Nov 2008 Posts: Too much.
|
most likely not, but how stiff/solid do you want the front end? I haven't noticed front end flex in my riding for it to be a concern, have you?
|
|
October 12th, 2010, 07:44 PM | #9 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
Nope. And if it did I didn't see it. I think it's just a matter of knowing how the bike handles and adjusting your riding style to it.
|
|
October 12th, 2010, 08:31 PM | #10 |
ninjette.org certified postwhore
Name: Greg
Location: Rhode Island
Join Date: Apr 2009 Motorcycle(s): 2013 ZX6R 636 Posts: A lot.
|
IrishJohn some cool older bikes - the Penton and the Bultaco
|
|
October 12th, 2010, 08:37 PM | #11 | ||
Humble Observer
Name: Truong
Location: Augusta, Maine
Join Date: Mar 2009 Motorcycle(s): 2009 Yamaha XT250 Posts: 612
|
Quote:
Also, braking hard enough to start a high-side might be too much speed to start with for setting up on a corner. Quote:
__________________________________________________
Everything I post is "IN MY HONEST OPINION". Why is "Parking Lot Enduro" not a thing? |
||
|
October 12th, 2010, 09:39 PM | #12 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
The torque from the brake disk wouldn't change no matter where the caliper is mounted, it would still be slowing the disk in the same direction. The caliper is typically mounted toward the rear as it makes for better (more centralized) weight distribution, and also simplifies brake line routing (somewhat).
Many bikes stand up under braking, and it has more to do with the front tire profile and steering geometry, than the relative stiffness of the front fork placement. A stiffer brace wouldn't hurt, but as it hasn't been generally found necessary for riding this bike at its limits on the track, it's unlikely to significantly change things on the street.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
October 13th, 2010, 03:51 AM | #13 |
ninjette.org member
Name: Steve
Location: Cumberland Plateau
Join Date: Aug 2010 Motorcycle(s): KLR 650, XT250, KLX250s, 09 Ninja 250, KT250, Beta 250, Scorpa 250, Sherpa T 350, Penton Jackpiner 175, IT425 Posts: 35
|
I appreciate everyones comments. It does make sense that ROI would dictate using "lesser" components than on the 250's bigger brothers. The effect of the bike trying to stand up under brake load is an effect of physics. However, I have noticed a significant difference between how the 250 handles this effect than say my 650 ninja. Any suggestions on a different front tire which might have better performance. The bike only has 2800 miles on it so I am still running the OEM tires.
As for the placement of the caliper behind the axis, I have a noticed on some GP bikes the caliper is mounted forward. The purpose of this is reverse the dirction of the braking torque effect. |
|
October 13th, 2010, 05:26 AM | #14 | |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Quote:
Telefix is a nice brace, dont think it would work with the 08 up fender thou. |
|
|
October 13th, 2010, 02:47 PM | #15 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
|
|
May 11th, 2012, 10:57 AM | #16 |
ninjette.org member
Name: your name
Location: NOLA
Join Date: Mar 2012 Motorcycle(s): 2011 Ninjer 250, 2002 TL1000R, 2009 Concourse14, 2009 ZX6, 2006 SV650 Posts: 19
|
My factory fender/fork brace is slighty warped, its soft steel, i bent it back, but im sure its not perfect...
Sooooo should i replace it with a potentially damaged used one off ebay? a brand new OVERPRICED OEM one? or one or something like this http://www.superbrace.com/simulation.html ? |
|
May 11th, 2012, 02:09 PM | #17 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
The radial point of pads' pressure application over the disc has no effect on the resulting torque or forces on the suspension. The braking torque tends to bend one telescope assembly (center portion forward-tire and bearings aft), while the other one remains unloaded. However, that asymmetrical bending is minimum and it would only twist the forks to the right an imperceptible amount. If your problem shows up during right and left turns alike, then that is not the cause. I believe that the increased inertia of the bigger bikes does make a difference. Note that those GP bikes have inverted forks; hence, the caliper is anchored in a different way.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Interested in a fork brace? Post!!! | old3 | 2013 - 2017 Ninja 300 Farkles | 13 | December 20th, 2014 12:34 AM |
Fork brace for a 2003 250R | Matty54 | 1986 - 2007 Ninja 250R Tech Talk | 8 | October 13th, 2014 07:20 PM |
FS: pregen SuperBrace fork brace | choneofakind | Motorcycle-related | 3 | August 4th, 2014 06:05 PM |
Fork brace interest | old3 | 2008 - 2012 Ninja 250R Farkles | 6 | January 17th, 2014 11:37 AM |
[2wf.com] - SuperBrace Fork Brace | Ninjette Newsbot | Motorcycling News | 0 | December 19th, 2008 02:43 AM |
|
|