December 4th, 2010, 10:43 AM | #1 |
ninjette.org member
Name: Clint
Location: Niagara Region, Ontario
Join Date: Aug 2010 Motorcycle(s): 2009 Ninja 250r Posts: 61
|
Silly question about jetting
I am in the amidst of doing my Factory Pro Stage 3 jet kit install. I wanted to follow some of the fellow ninjettes database as a starting ground. When the needle clip position is mentioned as 4, is that the second from the top of the needle or fourth from the top?
I believe its the fourth from the top, but just want to verify. Also, all my main jets were engraved with "FACTORY" indicating they are Factory Pro Jets except one. One of my 110's did not have that, and was a different colour brass from the rest. Should I worry about this jet not being an authentic Factory Pro jet or just install it? |
|
December 4th, 2010, 11:32 AM | #2 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
I believe the FP tuning guide says to count from the top. Does the jet still say 110 on it? If so, I wouldnt worry too much about it but you might call and ask if you are concerned.
Posted via Mobile Device |
|
December 4th, 2010, 11:41 AM | #3 |
Join Date: Nov 2008 Posts: Too much.
|
clip positions are counted from the blunt end of the needles. The first, closest to the blunt end, is #1.
|
|
December 4th, 2010, 02:02 PM | #4 |
ninjette.org member
Name: Clint
Location: Niagara Region, Ontario
Join Date: Aug 2010 Motorcycle(s): 2009 Ninja 250r Posts: 61
|
Thanks guys! Install is done!!!
Now I just have to wait for spring to fine tune. |
|
December 4th, 2010, 03:39 PM | #5 |
ninjette.org sage
Name: J
Location: Oklahoma
Join Date: Sep 2010 Motorcycle(s): 2008 250R Posts: 771
|
Ah yes I should have clarified. The "top" would be in reference to how the needle will sit in the carb when all mounted.
__________________________________________________
Factory Pro Jet Kit, K&N R-0990 Pod Filter, Sportisi VR Black Exhaust, BRT TIS Ignition, White Paint, and 16/41 Sprockets. Soon: Maybe a 37T Rear Sprocket if I get things running like I'd hoped. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jetting Question | Zaydoc | 1986 - 2007 Ninja 250R Tech Talk | 9 | March 23rd, 2012 02:11 AM |
jetting question | lotus168 | 2008 - 2012 Ninja 250R Tech Talk | 12 | April 10th, 2011 02:26 AM |
Jetting Question | Jordan91 | 2008 - 2012 Ninja 250R Tech Talk | 7 | January 17th, 2011 05:09 PM |
Jetting Question | crankinaway | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 9th, 2010 12:18 PM |
Jetting Question | bikermunda | 2008 - 2012 Ninja 250R Tech Talk | 25 | April 24th, 2009 11:32 PM |
|
|