May 25th, 2011, 07:06 PM | #1 |
ninjette.org member
Name: snowsoldier
Location: Niagara Falls
Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r - yoshi slip-on, fender-elim, Pazzo levers, Pro-bolt gold mods, b-monkey ITL, SSR hanger/spools Posts: 69
|
Factory Pro Jet Kit
hey everyone,
I just got my Factory Pro jet kit in the mail today and I wanted to get some feedback if possible. ive got an 09' 250r w/ yoshi slip on exhaust, and I will be removing the airbox and putting in 2 k&n rc-1822 chrome pod filters w/ the breather I will be changing the pilots to the 40's, I'm just not sure about the main jets, I guess from what I've read I will have to take a few stabs to find the sweet spot. should I be adjusting the floats? I was just reading the instuctions it comes with....has anyone done this???? |
|
May 25th, 2011, 07:09 PM | #2 |
ninjette.org member
Name: snowsoldier
Location: Niagara Falls
Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r - yoshi slip-on, fender-elim, Pazzo levers, Pro-bolt gold mods, b-monkey ITL, SSR hanger/spools Posts: 69
|
pic
factory pro jet kit
|
|
May 25th, 2011, 07:24 PM | #3 |
Join Date: Nov 2008 Posts: Too much.
|
bike should run fine with 112 or 110 mains.
I didn't play with the float height... check them when you're in there a decide for yourself if you want to change them or not. |
|
May 25th, 2011, 07:39 PM | #4 |
ninjette.org member
Name: snowsoldier
Location: Niagara Falls
Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r - yoshi slip-on, fender-elim, Pazzo levers, Pro-bolt gold mods, b-monkey ITL, SSR hanger/spools Posts: 69
|
what are the stock mains?
|
|
May 25th, 2011, 07:40 PM | #5 |
Join Date: Nov 2008 Posts: Too much.
|
98s... what is this, a quiz?
|
|
May 25th, 2011, 08:11 PM | #6 |
ladyrocket
Name: Megan
Location: Cali
Join Date: Dec 2010 Motorcycle(s): 09 Ninja 250R Posts: 84
Blog Entries: 1
|
I installed a Factory Pro stage 3 kit on my 2009. I pulled the air box, installed k&n pod filter, & have a L.O.R. slip on pipe.
Here are how my carbs are set: 112 Main Jet #40 Pilot Needle Clip /3 from the top Fuel Screws at 2-1/2 turns Runs great.....
__________________________________________________
Never ride faster than your angel can fly |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Factory Pro jet kit install? | nr19952910 | 2008 - 2012 Ninja 250R Tech Talk | 3 | March 22nd, 2015 06:26 AM |
Looking for Factory Pro Jet Kit for 2005 ninja. | agentbad | Items Wanted | 2 | June 26th, 2013 02:40 PM |
Factory Pro Stage 1 Jet kit | pilotgeorge747 | Motorcycle-related | 6 | January 6th, 2012 12:39 PM |
Ordered factory Pro jet kit | nate-bama | 1986 - 2007 Ninja 250R Tech Talk | 22 | October 10th, 2009 08:50 AM |
factory pro jet kit | newgirlrider | 2008 - 2012 Ninja 250R Tech Talk | 2 | August 4th, 2009 11:04 PM |
|
|