May 18th, 2011, 06:05 PM | #1 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Messed up on fender eliminating
Yep I messed up on my cutting to eliminate my fender and cut the wrong piece and now the whole fender is useless. So my question is do I buy a whole new ugly factory fender and try agin or is thier a kit out I can buy that is a complete fender eliminator cause right now I'm kinda screwed trying to save some money. Thx
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 18th, 2011, 06:15 PM | #2 |
ninjette.org certified postwhore
Name: dino
Location: Oceanside, Ca
Join Date: Nov 2010 Motorcycle(s): '09 250 Street, '09 250 Race, '13 300 Race Posts: A lot.
|
http://www.ninjette.org/forums/showthread.php?t=69857
I think he has one left, |
|
May 18th, 2011, 06:20 PM | #3 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Thanks just sent him a pm let's hope he has it lol, screwed myself good trying to avoid buying a kit an not being the best at cutting.
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 18th, 2011, 06:37 PM | #4 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Why wouldnt you just get a fender eliminator if your going to chop it anyway?
|
|
May 18th, 2011, 11:17 PM | #5 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
may be it's fixable, post pics so other members can advise and I can laugh at them....j/k
|
|
May 19th, 2011, 02:23 AM | #6 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Perhaps it's time for a whole undertail kit?
|
|
May 19th, 2011, 12:35 PM | #7 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
|
|
May 19th, 2011, 12:51 PM | #8 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Pics soon but I was doing a no kit needed chop to save money an I chopped the wrong piece
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 19th, 2011, 01:51 PM | #9 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
May 19th, 2011, 01:53 PM | #10 |
ninjette.org guru
Name: Darrell
Location: Brandon, FL
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R Posts: 330
|
you could always go to home depot buy 2 brackets and some screws= $5? its what i did BUT don't place it where mine is lol
__________________________________________________
09 White - Custom Carbon Fiber Undertail Exhaust w/ License Plate Bracket - K&N R-0990 - Driven 15t - DynoJet 106 Main Jets- Custom Flush Mounts - HID 5k - |
|
May 19th, 2011, 02:12 PM | #11 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Wife broke the computer so I'm trying to get some pics up from my iPhone but im a bit of a noon when it comes to things like this. Might take me a bit to get some up
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 19th, 2011, 05:08 PM | #12 |
ninjette.org member
Name: Dylan
Location: virginia beach
Join Date: Apr 2011 Motorcycle(s): 2011 250R SE:WHITE Posts: 27
|
Im interested in how you cut it in the wrong spot. I was planning on doing the same. My thought was take off the plate, mark a line with some painters tape, Cut (dremel most likely). Is it much harder than that? Just curious how it got messed up, and you said you cut the wrong part...
|
|
May 19th, 2011, 05:19 PM | #13 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Was using a little saw and wasn't paying much attention thinking he same thing u are and then took a closer look and was a little irritated.
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 19th, 2011, 07:20 PM | #14 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Question. Since I'm sure I need a new fender should I get a new 1 for 50 ish or will a tail under kit come with what I need which is 150 ish?
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 20th, 2011, 05:25 AM | #15 |
ninjette.org guru
Name: Darrell
Location: Brandon, FL
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R Posts: 330
|
well if your concerned about money... if you were to get a hotbodies smoke one with the led turn signals it is $114 then there is other fender eliminator kits that are $50-80 bucks then the last like before home depot way with some brackets and screws for maybe $5 and looks just as good to me.
The hotbodies undertail comes with the mounting brackets and all for the license plate
__________________________________________________
09 White - Custom Carbon Fiber Undertail Exhaust w/ License Plate Bracket - K&N R-0990 - Driven 15t - DynoJet 106 Main Jets- Custom Flush Mounts - HID 5k - |
|
May 20th, 2011, 06:28 AM | #16 |
ninjette.org member
Name: Rob
Location: Connecticut
Join Date: May 2011 Motorcycle(s): 2010 Red Ninja 250r Posts: 69
|
This is the exact reason why I bought the ProjektD fender eliminator. I didn't want to even bother cutting anything or messing anything up.
|
|
May 20th, 2011, 08:46 AM | #17 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
What I cut and messed up is he part that hold the tail light in place. I cut the bottom left side so I'm questing I need a new fender plus a kit since I don't want to bother cutting anythin agon
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 20th, 2011, 12:17 PM | #18 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
LOL. j/k, I had to. Show us a pic and maybe it can be salvaged. Otherwise, buy a kit that you can afford and does the trick. My bike came with the fender eliminated, so I can't help you on choosing a kit.
__________________________________________________
The www.ModMy250.com guy |
|
May 27th, 2011, 01:37 PM | #19 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
Got the new fender in and replaced lol 52 dollar mess up but live and learn. Now to do it right and buy a no cut eliminating kit
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 27th, 2011, 01:38 PM | #20 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[superbikeplanet.com] - Repsol Honda Work Order: Eliminating Things That Are Not Usef | Ninjette Newsbot | Motorcycling News | 0 | February 24th, 2015 07:30 AM |
Eliminating rear fender... | LR1914 | 2008 - 2012 Ninja 250R Tech Talk | 1 | July 4th, 2013 08:56 AM |
This is messed up | Apex | Off-Topic | 6 | January 20th, 2013 12:49 AM |
Need help! Eliminating ignition tumbler | Jiggyfly | Ninjettes At Speed | 15 | July 21st, 2012 07:39 AM |
[roadracingworld.com] - Harley-Davidson Cutting Production In 2009, Eliminating 1100 | Ninjette Newsbot | Motorcycling News | 0 | January 23rd, 2009 10:41 AM |
|
|