July 10th, 2011, 07:40 PM | #1 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
GB on Koso Instrument Panels
Here we go. Group-buy on instrument panels from Wayan Lam:
Koso kit RX2 (custom bezel + P&P koso set + volt meter) $355 Koso kit RX2 (custom bezel + P&P koso set + WITHOUT volt meter) $296 Koso kit RX2N (custom bezel + P&P koso set + volt meter) = $355 Koso kit RX2N (custom bezel + P&P koso set + WITHOUT volt meter) = $305 All prices do not include the paypal surcharge to reimburse Wayan, nor shipping. Shipping prices depend on how many folks sign up for this. I'm coming up with roughly $37.00 for each of us to get the package to the states, and about $20 to get from my place to yours. To not get completely obliterated on shipping, Wayan will be shipping to me, and I'll be shipping to you. I'm in on this group buy, for what it's worth. I've been dying to get one of these bad boys. |
|
July 10th, 2011, 07:44 PM | #2 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
I really want one but $400 doesnt sound too good right now. Maybe in 2 months if this GP goes this long
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
July 10th, 2011, 08:06 PM | #3 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
picture reference:
the three kits i bought for 3 other members in May. the specs for the 2 speedometers. voltmeter is optional, thus the different prices. http://youtu.be/K4mB_OmGezc lil video i recoded of the speedo starting up with the Koso voltmeter. (havent figured out how to imbed movies, rofl) cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 10th, 2011, 08:21 PM | #4 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
D: i want
|
|
July 10th, 2011, 08:36 PM | #5 |
ninjette.org member
Name: Sean
Location: Las Vegas
Join Date: May 2011 Motorcycle(s): 2009 Ninja 250R Posts: 133
|
How many orders are needed and when is the GB ending?
Thanks |
|
July 10th, 2011, 08:40 PM | #6 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
Party's over when we get enough people to pull this off!
I believe Wayan is talking about 5 units as a cutoff, or 10 if we get enough people. |
|
July 10th, 2011, 08:44 PM | #7 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ill let Mike answer that
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 10th, 2011, 10:34 PM | #8 |
ninjette.org Pirate
Name: Seph
Location: San Diego
Join Date: Nov 2010 Motorcycle(s): 2009 Ninja 250r Posts: 301
|
So the low end of this GB is ~$380 and the high end ~$440 (shipping and handling inclusive). Do I have that right?
That is quite a lot of scratch. I would be down, but I have several other things I need to maintain on my bike. I can probably get in on the next one, assuming there's another.
__________________________________________________
"She said I can't get a bike, so I dumped her." |
|
July 10th, 2011, 11:37 PM | #9 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
those prices are NETT price for the speedometers only. still excluding the 10~% and excluding shipping.
shipping cost will depend on how many ppl will join the GB, the more the cheaper... (theoretically) W. ps, IF someone can get them over to the states for a better price, maybe due to a more direct source, or cheaper shipping, go for it im not doing this as a business, just helping out if you guys would like something that you cant get over there. so if anyone wants to offer this GB for a better deal, feel free to post. im just a consumer, not a supplier myself
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 11th, 2011, 12:53 AM | #10 |
ninjette.org member
Name: dezmond
Location: Fresno
Join Date: Jul 2011 Motorcycle(s): 2011 250r Posts: 28
|
What's the diff between..passive speed sensor..and active speed sensor???????
|
|
July 11th, 2011, 01:21 AM | #11 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
really not sure to be honest. never noticed that comment on the 2 magnet sensors between the RX2 & RX2N
both sensors looked identical to me when i saw them last time~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 11th, 2011, 02:54 AM | #12 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
The price will come down depending on what shipping method you want me to use Stateside. As well, I'm not making jack either. I just want one of these things.
Here's the math: Price of gauge + 37.00 for international shipping + 4% for PayPal fees. Then whatever Stateside shipping costs. If you want to save money you can have me ship it to you via parcel post. It'll take longer, but it will also be a lot cheaper. |
|
July 11th, 2011, 09:24 AM | #13 | |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Quote:
I can't afford one of these right now, but kudos to helping people get some great gauges.
__________________________________________________
The www.ModMy250.com guy |
|
|
July 11th, 2011, 09:44 AM | #14 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i am curious, if you request the money as a "gift" does that mean that the person sending gets charged the 4%? or does PayPal not charge anything if its a "gift"? i think i saw someone mention that, but its not so clear to me yet...
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 11th, 2011, 10:23 AM | #15 | |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Quote:
1. The sender pays via bank transfer or from their paypal balance. In this case, neither the sender nor receiver pays fees. 2. The sender pays via credit card and the sender pays the fees.
__________________________________________________
The www.ModMy250.com guy |
|
|
July 11th, 2011, 10:29 PM | #16 |
ninjette.org member
Name: Darryl
Location: Brisbane, Australia
Join Date: Dec 2008 Motorcycle(s): 2010 Ninja ZX-6R Posts: 211
|
Why don't you guys try and set up a group by with someone local http://www.kosonorthamerica.com/ then find a distibutor and see what they say. It seems odd getting them from Indonesia.
|
|
July 11th, 2011, 11:43 PM | #17 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
Just a note, sending money via paypal as a gift releases paypal from any liability. So if the seller decides to stiff you and run off with the money, you're SOL.
|
|
July 12th, 2011, 02:46 PM | #18 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
I might be interested. I'm still waiting on a TON of parts to come in that I ordered months ago. More concerned about getting those here and installed first.
Do you by any chance have a time frame?
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
July 12th, 2011, 05:51 PM | #19 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
no time frame that im aware of, we basically just wait till there are enough ppl to make it worth while to ship together. or whenever mike decides~
i am happy to request the payment not as a gift, and rather as payment for a part (which is what i did on the last GB) if that makes it safer on the buyers part to have the guarantee. however as i mentioned in the beginning, i will be adding 10% (5% to cover the paypal fee, and 5% for my time that i will be spending to buy, check, pack & ship the goods). alternatively, i could ask for 5% if the money is sent as a gift, but that's up to you guys when the time comes oh, i also loose some money when i transfer money from PayPal to my bank, because they automatically exchange the USD into indonesian Rupees (at their exchange rates which aren't the best ), even though i have a USD account here... lame... anyhow, the actual money that i will be "earning" out of this GB will be at most $10~15 a set, but at least im not loosing money like i basically did on the last GB, lol
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 12th, 2011, 06:14 PM | #20 |
ninjette.org member
Name: dezmond
Location: Fresno
Join Date: Jul 2011 Motorcycle(s): 2011 250r Posts: 28
|
1. White horse- Rx2 .no volt. NO HOLE.
2. 3. 4. 5. 12. 20. |
|
July 12th, 2011, 06:20 PM | #21 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
oh ya, specify if you would like the fiberglass bracket With, or Without the hole if you are not getting the voltmeter.
so update your item Dez
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 12th, 2011, 06:34 PM | #22 |
ninjette.org member
Name: dezmond
Location: Fresno
Join Date: Jul 2011 Motorcycle(s): 2011 250r Posts: 28
|
|
|
July 18th, 2011, 12:23 PM | #23 |
ninjette.org member
Name: Pookey
Location: houston
Join Date: Apr 2011 Motorcycle(s): Ninja 250 Posts: 22
|
is this still on
|
|
July 18th, 2011, 05:43 PM | #24 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
Absolutely!
1. White horse- Rx2 .no volt. NO HOLE. 2. Outlander Systems - RX2 Koso kit RX2 (custom bezel + P&P koso set + Blue Volt Meter) $355 3. 4. 5. 12. 20.
__________________________________________________
Outlander Systems YouTube Channel Outlander Systems Facebook Page |
|
July 18th, 2011, 06:09 PM | #25 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
I already have the koso gauge, but I like that voltmeter. How much would it be the total cos with shipping.
|
|
July 19th, 2011, 02:27 PM | #26 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
Are there any stuff that we can get aside from the koso's? like you know, cheap farkle stuff?
|
|
July 20th, 2011, 06:26 PM | #27 | ||
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
http://www.ninjette.org/forums/showp...81&postcount=1 that was my old GB thread where i had quite a few bits n bobs~ Quote:
otherwise, there might be a small GB happening shortly with a DHL package that im getting ready to ship out soon (regardless if others join in or not, since the person wants the parts sent over).
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
||
|
July 20th, 2011, 06:30 PM | #28 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
new model old model (not available anymore)
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
July 30th, 2011, 08:28 PM | #29 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ive got a DHL package heading out with a HID kit and Koso+bracket+Voltmeter kit. shipping it regardless if others will be joining in with this shipment.
so its a quick offer if anyone wants a koso kit, we can ship it together, and split the shipping cost between them. back to the cost of the items however, i would like to state that i am charging 10% on the price listed. ill do a transfer request, so that the 4% gets deducted from my end, and then the exchange rate when withdrawing the money into my bank account is another +/-3%, so im left with 3% extra to cover costs here, which is still close to nothing compared to the time i spend organizing this deadline is uh, Monday or Tuesday if no one takes the offer i'm shipping the package. cheers. W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
July 30th, 2011, 09:19 PM | #30 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
Wayan, I'm holding out on this group buy. I was waiting to, hopefully, get at least five people in on this before doing it down. I'll give it one more month. If nothing comes of it, then I'll spring for the extra cash, and just buy one for myself and eat the beating on shipment.
__________________________________________________
Outlander Systems YouTube Channel Outlander Systems Facebook Page |
|
August 2nd, 2011, 12:41 AM | #31 |
ninjette.org newbie
Name: Dave
Location: Tampa Fla.
Join Date: Aug 2011 Motorcycle(s): 2011 Ninja 250R Posts: 2
|
Wayalam, I want the (Koso kit RX2N (custom bezel + P&P koso set + volt meter). Please pm me with regards to a purchase. Not concerned with cost I just want it easy and want to make sure it is plug and play. I have a 2011. Thanks Dave
|
|
August 2nd, 2011, 03:04 AM | #32 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
1. White horse - Rx2 .no volt. NO HOLE.
2. Outlander Systems - RX2 Koso kit RX2 (custom bezel + P&P koso set + Blue Volt Meter) $355 3. dave241 - Koso kit RX2N (custom bezel + P&P koso set + volt meter 4. 5. If we can get two more folks, it's on!
__________________________________________________
Outlander Systems YouTube Channel Outlander Systems Facebook Page |
|
August 2nd, 2011, 06:17 PM | #33 | |
ninjette.org newbie
Name: Dave
Location: Tampa Fla.
Join Date: Aug 2011 Motorcycle(s): 2011 Ninja 250R Posts: 2
|
Quote:
|
|
|
August 2nd, 2011, 06:58 PM | #34 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
Dave, we are doing five, so we just need one more!
1. White horse - Rx2 .no volt. NO HOLE. 2. Outlander Systems - RX2 Koso kit RX2 custom bezel + P&P koso set + Volt Meter) $355 3. dave241 - Koso kit RX2N custom bezel + P&P koso set + volt meter 4. dave241 - Koso kit RX2N custom bezel + P&P koso set + volt meter 5.
__________________________________________________
Outlander Systems YouTube Channel Outlander Systems Facebook Page |
|
August 2nd, 2011, 08:27 PM | #35 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
the kit is plug and play. i believe ive posted a semi DIY on the install that i did with my kit last year.
the price that is posted up top by Mike is the cost price that i have to pay for here. the exchange i used was 8500 Rp/USD, the exchange is still the same, so that stays the same. however, the price that i will be asking will be those prices PLUS 10%. i will send the paypal request, so i will get the 4% deducted from the transfer on my end, then it costs me about 3% for me to withdraw the money from PP to my bank account here in Indonesia, so paypal gobbles up 7% right up. leaving me with less than 4%. for shipping i will be marking up the price by 7.5%, to cover the paypal charges. i had an issue with the other GB, where i asked for the exact amount, not knowing that PP would take 4% per transaction, and not knowing that it would cost me to withdraw money, so i ended up loosing money. however everyone in the GB pitched in and helped to cover that. oh ya, i told ppl it was optional to give me a tip, but not everyone did... which is why i was left in the red. so, learning from that experience i want to make sure that i am certain that i wont be making a loss in $$, on top of the time i will have spent organizing this. and its not just a matter of me going to a shop and picking them up out of some shelves... takes me time to order them, i need to go pick them up, check that they are all complete, etc. anyhow, i am only making about $30 out of a $1000 transaction, which is actually next to nothing. i do not think that many would agree to do this for such a small amount. (im making this clear to all with the breakdown, in case anyone starts thinking that im just changing prices because i feel like it or something). so, tips are still welcome, hehe im shipping the other package with the HID projector and koso kit, since no one wanted to join it on that, and the goods have been ready since over a week now. if a GB happens, it will be shipped according to whatever gets decided here cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
August 3rd, 2011, 02:39 PM | #36 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Price
Are all of these kits PLUG AND PLAY? Also....what are the EXACT prices shipped to my door?
I'm very interested, but would like to know exactly what this will cost? |
|
August 3rd, 2011, 02:46 PM | #37 |
ninjette.org Tengu
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011 Motorcycle(s): Kawasaki Ninja ZX6R Posts: 256
|
Michael:
There will be a group pricing based upon the shipping cost for the five units, plus the covering of Wayan's PayPal fees. Once the units arrive to the U.S. I will ship to you, based on actual shipping costs. I don't see the units being more the $10-$15 bucks to ship stateside. We're shipping them to me first to save on the international shipping. Then I ship to you based on whatever you want to pay to have the item shipped. I can Parcel Post it for cheeeeeeeap!
__________________________________________________
Outlander Systems YouTube Channel Outlander Systems Facebook Page |
|
August 3rd, 2011, 03:59 PM | #38 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
Can you do an rx2 without the bezel?
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
August 3rd, 2011, 06:40 PM | #39 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i think the kit without voltmeter, and without the bezel costs like $240 here (cost price). with the P&P harness/cable kit, etc.
you might want to check what it would cost you to get it directly in Koso USA. i think the only reason ppl are getting these kits from all the way here is because they want the custom bracket/Bezel. cheers, W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
August 5th, 2011, 02:16 PM | #40 |
ninjette.org member
Name: Canada
Location: Duncan, B.C. Canada
Join Date: Jul 2011 Motorcycle(s): 2010 Ninja 250r Posts: 80
|
Is this group buy still on? Im interested in the RX-2 without volt-meter. But wondering aprox how much total would be shipped to my door in Canada Postal code V9L 5V9. Watching the gauges fire up gives me a boner.
http://www.youtube.com/watch?v=VazPvsQGHDc |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fiberglass on panels to transform the look? anybody know how? | azian4lifz | 1986 - 2007 Ninja 250R Tech Talk | 1 | October 11th, 2013 07:11 PM |
Instrument cluster on an FZ6 | eddiekay | General Motorcycling Discussion | 4 | January 20th, 2013 01:46 PM |
Need rear side panels | psych0hans | Items Wanted | 0 | May 28th, 2012 11:21 AM |
Instrument Cluster | Keenan84 | 2008 - 2012 Ninja 250R Farkles | 5 | February 4th, 2010 04:47 PM |
Body Panels | Kawasabi | 2008 - 2012 Ninja 250R Tech Talk | 8 | August 13th, 2009 08:13 AM |
|
|