January 5th, 2012, 07:06 PM | #1 |
ninjette.org guru
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250 SE Posts: 338
|
Where does this screw go?
I seem to be terrible at keeping them organized while working on the bike. Lesson learned
IMG_20120105_210211.jpg
__________________________________________________
2013 CRF250L 1985 GL1200 Interstate |
|
January 5th, 2012, 07:11 PM | #2 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Given the picture you submitted I would say in your ear
But i'm not really a mechanic. |
|
January 5th, 2012, 07:17 PM | #3 |
ninjette.org guru
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250 SE Posts: 338
|
I work pretty hard keeping them out of my ear
__________________________________________________
2013 CRF250L 1985 GL1200 Interstate |
|
January 5th, 2012, 07:20 PM | #4 |
Ambrosia.
Name: Jaymie
Location: Oahu, Hawaii
Join Date: Aug 2011 Motorcycle(s): 1974 Honda CB550K0 W.I.P. Posts: A lot.
|
That's a very interesting screw. I don't remember seeing that whenever I worked on my bike.
__________________________________________________
Life's better on the Mountain. |
|
January 5th, 2012, 07:22 PM | #5 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
The screw holds the seat or on your front fender I believe.
|
|
January 5th, 2012, 07:27 PM | #6 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
I see no pic...
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
January 5th, 2012, 07:47 PM | #7 |
ninjette.org guru
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250 SE Posts: 338
|
I'll give that one a try. Thanks!
__________________________________________________
2013 CRF250L 1985 GL1200 Interstate |
|
January 5th, 2012, 08:19 PM | #8 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Wait...is there legitimately a screw we should be seeing here?
I thought we were all screwing around... |
|
January 5th, 2012, 08:24 PM | #9 |
Ambrosia.
Name: Jaymie
Location: Oahu, Hawaii
Join Date: Aug 2011 Motorcycle(s): 1974 Honda CB550K0 W.I.P. Posts: A lot.
|
At first I didn't see it. I had to quote his post and copy the link he posted.
__________________________________________________
Life's better on the Mountain. |
|
January 5th, 2012, 08:34 PM | #10 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
Oh, I see thanks. Yeah looks like the bolt for the seat
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
January 5th, 2012, 11:43 PM | #11 | |
ninjette.org member
Name: Rob
Location: So Cal
Join Date: Nov 2011 Motorcycle(s): 2010 Ninja 250 Posts: 14
|
Quote:
|
|
|
January 6th, 2012, 01:56 AM | #12 |
ninjette.org member
Name: Andrew
Location: Orlando, FL
Join Date: Jun 2011 Motorcycle(s): 2014 300 Posts: 162
|
I'm pretty sure its for the front fender.
The screw for the seat is black and doesn't have that spacer. |
|
January 6th, 2012, 02:11 AM | #13 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
definitely NOT the seat screw. Might be one of the ones that connect the rear fairings together between the two seats?
|
|
January 6th, 2012, 02:51 AM | #14 |
Ex ninjette!
Name: Jack
Location: East sussex England
Join Date: Nov 2011 Motorcycle(s): Suzuki GSXR 600 K4, Kawasaki ninja 250r 08 Posts: 294
|
|
|
January 6th, 2012, 06:33 AM | #15 |
ninjette.org guru
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250 SE Posts: 338
|
Well I have 2 possible locations now, I'll try both
For those not seeing the picture, it's hosted on Drop Box, not a clue why it wouldn't be showing up.
__________________________________________________
2013 CRF250L 1985 GL1200 Interstate |
|
January 6th, 2012, 08:14 AM | #16 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I changed the picture to be a local attachment; everyone should be able to see it at this point.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
January 6th, 2012, 08:17 AM | #17 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
You guys are killing me...it's like sex...just stick it in whichever hole it fits.
|
|
January 6th, 2012, 11:50 AM | #18 |
ninjette.org sage
Name: .
Location: .
Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R SE GREEN! Posts: 562
|
Seat bolt 100% unless you've taken things apart that I haven't which is unlikely
__________________________________________________
Trust me, I'm a banana! |
|
January 6th, 2012, 12:12 PM | #19 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
fixed , I am 99% sure after taking the bike completely apart more than once there is a silver screw with a spacer washer that secures the front seat. for the rear fairings that washer is black with a narrower and longer screw. That screw can be seen right under your rear seat
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
January 6th, 2012, 12:47 PM | #20 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Well I don't know about you but my front seat is secured by 2 screws and absolutely 0 spacers, washers, welds, zipties, or anything else.
|
|
January 6th, 2012, 12:49 PM | #21 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
|
|
January 6th, 2012, 02:00 PM | #22 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
hahahah no no that's not possible, my bike is absolutely perfect in every single way
|
|
January 6th, 2012, 02:03 PM | #23 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
The fenders have those spacers. I forget what else has them... I just took everything off so I kind if know... Kind of... Pretty sure Im going to forget when it all goes back together..
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 6th, 2012, 02:08 PM | #24 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
Screw you guys!
|
|
January 6th, 2012, 02:10 PM | #25 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Whatever you said may be true to. I know there is another place I noticed them, but I forgot already.. lol
also that mirror came. Thanks Bro Mc'Bropherson
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 6th, 2012, 03:19 PM | #26 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Yeah thats for the front seat or the bots holding the rear fairings together under the front seat
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
January 6th, 2012, 03:38 PM | #27 |
ninjette.org guru
Name: Pat
Location: Barrie, Ontario
Join Date: Jun 2009 Motorcycle(s): 2009 Ninja 250 SE Posts: 338
|
I'm gonna go with seat on this one. I've only removed the front nose bit and the side fairings and seat. If they use a similar one on the rear, I wouldn't have been into it yet.
__________________________________________________
2013 CRF250L 1985 GL1200 Interstate |
|
January 6th, 2012, 04:31 PM | #28 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
the screw is the same as tens of other screws on the bike but that washer is used for the front seat and the bottom rear side fairing mounts. however every single 250 i've seen that isnt brand new no longer has that washer on the bottom fairing mount anymore... i wonder why? lol
__________________________________________________
|
|
January 7th, 2012, 09:15 AM | #29 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
OP - it's a little late to help this time, but you might benefit from this next time... http://www.ninjette.org/wiki/File:Ninja_screwkeeper.pdf
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2008+ Ninja 250 Carburetor Screw size, allen screw size! | Runeknight95 | 2008 - 2012 Ninja 250R Tech Talk | 4 | March 2nd, 2015 11:49 AM |
Where do you get your screw needs? | Qomomoko | Items Wanted | 15 | February 23rd, 2015 08:45 AM |
A Screw | GearMonkey | Items Wanted | 8 | May 7th, 2013 04:50 PM |
Where does this screw go? | PistolPete93 | 2008 - 2012 Ninja 250R Tech Talk | 24 | March 5th, 2013 09:29 PM |
Theres a screw -__- | A Tomato | 2008 - 2012 Ninja 250R Tech Talk | 20 | July 7th, 2012 11:01 PM |
|
|