![]() |
![]() |
#81 | |
dirty old man
Name: Chris
Location: Hazel Green, AL
Join Date: Nov 2008 Motorcycle(s): Blue '08 Ninja 250 Posts: A lot.
Blog Entries: 1
|
Quote:
![]() nb
__________________________________________________
Death tugs at my ear and says, "Live, I am coming." -Oliver Wendell Holmes, Sr., poet, novelist, essayist, and physician (1809-1894) www.friendsofsanonofre.org |
|
![]() |
![]() |
![]() |
#82 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
Does anyone have a part number on the stand offs and grommets that work? I managed to lose one of my front ones. Good news is that it fits better now. Go figure.
|
![]() |
![]() |
![]() |
#83 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
looks good to me sound wave
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
![]() |
![]() |
![]() |
#84 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
the rear grommet is hillman part number 139377. it is a 31/32" outer diameter and a 1/2" inner diameter. found it at lowes in the nuts and bolts section in the drawers.
for me, i just used some rubber caster looking thingys in the front. i stacked 3 of them up on each side. i will try to find my packaging. edit: thanks guys. edit again: corey beth.. yeah it fits better because the stock ones are too high. i bet it wobbles now though, huh? so you gotta bend the bracket as much as you can and have it still catch the lock, and you gotta put as little rubber stopper as you can without it wobbling. kind of a balancing act. |
![]() |
![]() |
![]() |
#85 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
I'd like to add...the stock ones are supposed to eventually settle in. It should come out fine without modding them.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#86 |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
i know this is off subject but where would you find those net type things people strap to the passenger seat if they dont have a cowl to haul things around?
|
![]() |
![]() |
![]() |
#87 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
http://www.ascycles.com/detail.aspx?ID=39079
Dont know how to use it on the 250. Sure youd figure something out.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#88 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
Ended up making my own little stand offs. Got some bumpers from Home Depot and used JB Weld to put them in their place. Seems to be doing a great job and they don't pop off like the OE ones do.
|
![]() |
![]() |
![]() |
#89 | |
ninjette.org member
Name: Kayla
Location: Tempe, AZ
Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250 Candy Plasma Blue Posts: 67
|
Quote:
|
|
![]() |
![]() |
![]() |
#90 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
I couldn't find any at homedepot!!!!!!
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
![]() |
![]() |
![]() |
#91 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
home depot didn't have the rear grommet. i got the rear grommet at lowes.
for the front bumper, i went to a local hardware store and looked in the section where they sold casters and felt pads for table legs and stuff. the rubber pads i got are meant to be placed under table legs, chair legs, etc. i just brought the stock bumper and found one that was the same diameter. i had to stack up 3 per side. |
![]() |
![]() |
![]() |
#92 |
ninjette.org member
Name: D
Location: cali
Join Date: Mar 2009 Motorcycle(s): 2009 Kawi Ninja 250R Posts: 114
|
I just got in my new rear cowl and the front of it fits HORRIBLE. wow that gap is tremendous.
|
![]() |
![]() |
![]() |
#93 |
Join Date: Nov 2008 Posts: Too much.
|
you sure you have the rubber bumpers installed in their correct locations?
|
![]() |
![]() |
![]() |
#94 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
do the fix and you will be fine... but yeah, it is shocking how huge the stock gap is.
|
![]() |
![]() |
![]() |
#95 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
I wonder if they even know theres a problem?
It does suck it has to be bent. Oh well it not that hard of a fix.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#96 | |
ninjette.org member
Name: D
Location: cali
Join Date: Mar 2009 Motorcycle(s): 2009 Kawi Ninja 250R Posts: 114
|
Quote:
The larger fatter ones go near the front of the bike while the smaller ones are near the rear tail light. I'll take some pics in the daytime soon. As far as this thing goes, I think I'm going to leave it as is. It's something that I don't want to mess with further unless it really ends up bothering me. |
|
![]() |
![]() |
![]() |
#97 | |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Quote:
Does the front move from side to side at all when installed? Guess if your fine with it, just leave it ![]()
__________________________________________________
![]() |
|
![]() |
![]() |
![]() |
#98 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
d, yeah installed properly as shipped, there will be the huge gap. i am pretty sure you did it right.
|
![]() |
![]() |
![]() |
#99 |
ninjette.org member
Name: Pete
Location: Clifton, NJ
Join Date: Mar 2009 Motorcycle(s): 2009 BLACK Kawasaki Ninja 250R Posts: 164
|
same here, at least i can use the helmet hook now.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#100 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
![]() Me thinks the flusher the better ![]() Honey...the flushers broke... ![]()
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#101 | |
dirty old man
Name: Chris
Location: Hazel Green, AL
Join Date: Nov 2008 Motorcycle(s): Blue '08 Ninja 250 Posts: A lot.
Blog Entries: 1
|
Quote:
![]() nb
__________________________________________________
Death tugs at my ear and says, "Live, I am coming." -Oliver Wendell Holmes, Sr., poet, novelist, essayist, and physician (1809-1894) www.friendsofsanonofre.org |
|
![]() |
![]() |
![]() |
#102 |
VooDooMaster
Name: Dave
Location: tucson
Join Date: Feb 2009 Motorcycle(s): 2008 Blue EX250, 2007 Yamaha Virago 250 Posts: 173
|
No no no...that's the crapper. The flusher is some kind of think that scares quail out from the bushes right before you gonna shoot em'. Now thats a flusher.
![]()
__________________________________________________
![]() VooDooMaster ![]() I love the smell of Blue Octane in the morning..... ![]() |
![]() |
![]() |
![]() |
#103 | |
dirty old man
Name: Chris
Location: Hazel Green, AL
Join Date: Nov 2008 Motorcycle(s): Blue '08 Ninja 250 Posts: A lot.
Blog Entries: 1
|
Quote:
Or do you just walk up into the middle of them? nb
__________________________________________________
Death tugs at my ear and says, "Live, I am coming." -Oliver Wendell Holmes, Sr., poet, novelist, essayist, and physician (1809-1894) www.friendsofsanonofre.org |
|
![]() |
![]() |
![]() |
#104 | |
VooDooMaster
Name: Dave
Location: tucson
Join Date: Feb 2009 Motorcycle(s): 2008 Blue EX250, 2007 Yamaha Virago 250 Posts: 173
|
Quote:
Yup...reckon so...sounds like the same. ![]()
__________________________________________________
![]() VooDooMaster ![]() I love the smell of Blue Octane in the morning..... ![]() |
|
![]() |
![]() |
![]() |
#105 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
My JB welded bumpers are working great. As for the rear grommet, not so much. The rear end keeps popping out. Any suggestions?
|
![]() |
![]() |
![]() |
#106 |
ninjette.org member
Name: Wade
Location: Sydney, Australia
Join Date: Feb 2009 Motorcycle(s): Black 2009 Ninja 250 Posts: 52
|
where did you get it from? and do they sell black?
|
![]() |
![]() |
![]() |
#107 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
|
![]() |
![]() |
![]() |
#108 | |
VooDooMaster
Name: Dave
Location: tucson
Join Date: Feb 2009 Motorcycle(s): 2008 Blue EX250, 2007 Yamaha Virago 250 Posts: 173
|
Quote:
![]()
__________________________________________________
![]() VooDooMaster ![]() I love the smell of Blue Octane in the morning..... ![]() |
|
![]() |
![]() |
![]() |
#109 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
Thanks Dave!! I'll get right on that... tomorrow. lol. It makes sense that it would work the way you described it.
|
![]() |
![]() |
![]() |
#110 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
hmm.... good idea. gotta try this too.
|
![]() |
![]() |
![]() |
#111 |
ninjette.org certified postwhore
Name: Joe
Location: Buffalo NY
Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.
|
Good idea. I did notice the rear post was alittle off from the mold.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#112 | |
VooDooMaster
Name: Dave
Location: tucson
Join Date: Feb 2009 Motorcycle(s): 2008 Blue EX250, 2007 Yamaha Virago 250 Posts: 173
|
Quote:
All. I had to file away several times, a little bit at a time until it fit correctly. I used the supplied rubbers that came with it, and did not bend the bracket. I'm happy enough with the fitment, although it could be a little flatter. The gap between the bike and the cowl is thin enough for me. Once the cowl seated into the grommet correctly, the gap reduced naturally. ![]()
__________________________________________________
![]() VooDooMaster ![]() I love the smell of Blue Octane in the morning..... ![]() |
|
![]() |
![]() |
![]() |
#113 |
ninjette.org member
Name: Mike
Location: Barrie, Ontario, Canada
Join Date: Mar 2009 Motorcycle(s): 2009 Ninja 250R SE Green Posts: 217
|
I bought an OEM cowl cover for my sexy green beast and it fits very well. very slight gap but nothing i'd call bad or a problem, it looks just as big as my friends gsxr cover does. I do with the cover was a little tougher to remove, its not going to fall off or anything, but if someone really wanted to steal it they could stuck a key or a knife blade in the gap and with a little leverage it does pop off from the back....thinking of it now though I never did try and see if it would come out of the front locking part...so maybe i'm wrong....lol.
i know I told Nemy i'd take some pics of the bike with the cowl on for him to see, i'll try and rememebr to take pics of the gap so you can compair....maybe it's just the cheep ebay knock offs? my OEM was only $100 +tax Only thing that my friend commented on is that i do have to use a fair amount of force when pushing the cowl back down so that it clicks and locks. |
![]() |
![]() |
![]() |
#114 |
The Grand Royal
Name: Cochese
Location: Unmarked Rustbox
Join Date: Dec 2008 Motorcycle(s): 2009 Ninja 250R Posts: 258
|
I had a PITA time with mine too when I installed it. Turns out the guy I bought it from but the rear grommets where the fronts were supposed to go. Easy fix for me. Mine never comes off. I never use the rear seat.
I bought my cowl new and uninstalled from a guy on eBay who sold his bike. I think I paid $55 IIRC. |
![]() |
![]() |
![]() |
#115 |
ninjette.org member
Name: D
Location: cali
Join Date: Mar 2009 Motorcycle(s): 2009 Kawi Ninja 250R Posts: 114
|
I need another rear o ring that fits better. The original one got lost somewhere and my replacement also got lost. Ugh. Any recomendations?
Posted via Mobile Device |
![]() |
![]() |
![]() |
#116 | ||
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
Quote:
Quote:
![]() that has been working great for me. ninjablk08 originally posted about it. http://www.ninjette.org/forums/showt...hlight=grommet |
||
![]() |
![]() |
![]() |
#117 |
ninjette.org member
Name: D
Location: cali
Join Date: Mar 2009 Motorcycle(s): 2009 Kawi Ninja 250R Posts: 114
|
lowes here I come.
Thanks for so much help today Gary ![]() |
![]() |
![]() |
![]() |
#118 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
np. that is what the forum is for.
![]() i know i received my fair share of help from this forum too. |
![]() |
![]() |
![]() |
#119 |
ninjette.org member
Name: D
Location: cali
Join Date: Mar 2009 Motorcycle(s): 2009 Kawi Ninja 250R Posts: 114
|
I picked up 2 more from lowes. The fit is very good.
Unfortunately, I lost another one. That makes the total count of lost rubber grommets to 3 now haha. Luckily I have the back up... |
![]() |
![]() |
![]() |
#120 | |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
Quote:
Just lost mines as well...
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
|
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Seat Key Hole Grommet HELP! | aurbz | 2008 - 2012 Ninja 250R Tech Talk | 7 | March 14th, 2015 12:07 AM |
Rubber nubs for passenger seat? | 249cc | 2008 - 2012 Ninja 250R Tech Talk | 13 | February 3rd, 2013 11:06 PM |
wtb: 08+ front cowl & solo seat cowl | gt_turbo | Items Wanted | 3 | November 9th, 2011 08:37 AM |
Rubber bumper fell off my seat cowl, where can I get a replacement?? | LoneRonin | Items Wanted | 5 | October 13th, 2011 02:29 PM |
Fender Eliminator, Corbin Seat, Rear Seat Cowl Installed | k-os | Pictures | 9 | February 10th, 2009 08:56 AM |
|
|