How to remove this style throttle cable(raptor 80)

Floki · January 27th, 2014, 10:31 PM

I have no idea

cuong-nutz · January 28th, 2014, 02:41 AM

My guess:

Remove the zig-zag spring/retainer and remove the c-clip.

bruce71198 · January 28th, 2014, 06:03 AM

Quote:

Originally Posted by cuong-nutz

My guess:

Remove the zig-zag spring/retainer and remove the c-clip.

That. And then the needle valve will come out if you tip the slide or carb up side down revealing the hole the throttle cable goes through. C clip doesn't need to come off.

Floki · January 28th, 2014, 09:06 AM

Thanks! I think the brass bucket that holds the throttle cable has glued itself shut. I think it is supposed to move up and down when you pull the throttle cable.

bruce71198 · January 28th, 2014, 01:46 PM

Thats the throttle slide and yes its supposed to move up and down. If penetrating oil doesn't get it moving Some heat may be needed to free that up.

January 28th, 2014, 02:41 AM	#2
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	My guess: Remove the zig-zag spring/retainer and remove the c-clip. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help with throttle cable on carbs	gantt	2008 - 2012 Ninja 250R Tech Talk	4	March 28th, 2015 06:58 PM
Throttle went while riding -> need new throttle cable?	AndrewMack	2008 - 2012 Ninja 250R Tech Talk	13	September 8th, 2013 06:17 PM
Throttle Cable Housing	indr	2008 - 2012 Ninja 250R Tech Talk	2	December 20th, 2012 07:44 PM
Adjusting Throttle Cable - Barrel adjusters and Throttle body adjusters are maxed out	theob	2008 - 2012 Ninja 250R Tech Talk	10	July 19th, 2012 05:01 PM
Throttle & Throttle Cable Smoothness	paterick4o8	2008 - 2012 Ninja 250R Tech Talk	3	December 1st, 2009 01:50 PM

January 28th, 2014, 09:06 AM	#4
Floki Motorcycle Nurse? Name: Jacques Location: Gulf Coast Join Date: Sep 2013 Motorcycle(s): 2010 250R, 1998 Ducati 748L #77/100 Posts: 606	Thanks! I think the brass bucket that holds the throttle cable has glued itself shut. I think it is supposed to move up and down when you pull the throttle cable.

January 28th, 2014, 01:46 PM	#5
bruce71198 ninjette.org sage Name: bruce Location: northern illinois Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999	Thats the throttle slide and yes its supposed to move up and down. If penetrating oil doesn't get it moving Some heat may be needed to free that up.