March 6th, 2014, 08:13 AM | #41 |
ninjette.org member
Name: Jacob
Location: Portland, OR
Join Date: Dec 2013 Motorcycle(s): Ninja 250R (race), Aprilia Tuono 1000R, CRF250X, DR650 Posts: 18
|
The motion pro is not as "quick" as the 06+
|
|
March 6th, 2014, 09:19 AM | #42 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
What are you talking about? Motion pro comes with 4 different diameter inserts... All the way up to 50mm, if that isn't quick, I don't know what is...
|
|
March 6th, 2014, 09:20 AM | #43 |
ninjette.org member
Name: Jacob
Location: Portland, OR
Join Date: Dec 2013 Motorcycle(s): Ninja 250R (race), Aprilia Tuono 1000R, CRF250X, DR650 Posts: 18
|
|
|
March 6th, 2014, 09:22 AM | #44 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Nope, that I did not do...
|
|
March 6th, 2014, 09:47 AM | #45 |
ninjette.org member
Name: Joshua
Location: Loomis, CA
Join Date: Jan 2012 Motorcycle(s): 2008 (Black) Kawasaki Ninja 250R Posts: 151
|
I'm not sure which mine is but it's quick enough, believe me. It's 2x quicker then stock.
|
|
March 6th, 2014, 10:24 AM | #46 |
ninjette.org member
Name: Jacob
Location: Portland, OR
Join Date: Dec 2013 Motorcycle(s): Ninja 250R (race), Aprilia Tuono 1000R, CRF250X, DR650 Posts: 18
|
Should be same as 05 R6
|
|
April 7th, 2014, 06:39 PM | #47 |
Rode with the Dinosaurs..
Name: Joe
Location: middle of the pacific
Join Date: Nov 2013 Motorcycle(s): '08 Ninja 250 Posts: 486
|
I got the '05 R6 barrel from flea-bay for $11.21 shipped and installed it Saturday. Definitely a plug and play mod. The part of the conversion that took me the longest was getting the old grip off of the original barrel.
__________________________________________________
Fortune favors the brave! |
|
April 25th, 2014, 09:34 PM | #48 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
06+ R6 throttle tube sticks, 05 R6 throttle tube doesnt .. 06+ needs trimming for sure. I currently have 05 R6 which is plug n play.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
June 11th, 2014, 11:43 PM | #50 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
You need one of these and one of these and you have everything you need to make your own Quick action throttle at half the cost of a motion pro... I use that and I've even zip tied my R6 tube for that additional bite... I'm planning on buying another set of housing and throttle just to see how far I can go.
|
|
June 19th, 2014, 06:38 AM | #51 |
ninjette.org member
Name: Scott
Location: Claremore Oklahoma
Join Date: May 2014 Motorcycle(s): 2003 Ex250 Posts: 165
|
I have a 2003 that I'm setting up for track duty.
I bought the 06 R6 tube and it fit the housing fine. The cables fit the housing like they should and are smooth operating... but... when attaching the cables to the carb everything went together ok after I loosened up the adjusters all the way top and bottom . The problem is that now the throttle will not close all the way. It's smooth and snaps shut but not all the way.. there is almost a 1/4" gap between the idle adjust stop and the tang on the carb... any ideas? |
|
June 19th, 2014, 08:56 PM | #52 |
ninjette.org member
Name: Scott
Location: Claremore Oklahoma
Join Date: May 2014 Motorcycle(s): 2003 Ex250 Posts: 165
|
So it turned out the pull cable was too short. Well really it was the cable housing the was too long... I went and peeled the vinyl back, unwound the housing to where I figured was about right and cut it. After much fumbling and cussing I was able to get the cable back into the r6 tube and switch housing and on the clip on. I was pretty lucky and got the cut right on the money and now the throttle works perfect!
Definitely I can say that on the pre gen at least this mod is not a plug and play thing... |
|
June 20th, 2014, 06:22 AM | #53 |
Fighting Texas Aggie '05
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.
|
so obviously conflicting reports - does the R6 (and if so what year) throttle tube drop in to any of our bikes without modification?
__________________________________________________
Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare |
|
June 20th, 2014, 06:39 AM | #54 |
ninjette.org member
Name: Scott
Location: Claremore Oklahoma
Join Date: May 2014 Motorcycle(s): 2003 Ex250 Posts: 165
|
And to be honest the 06 r6 tube did not shorten the throttle travel as much as I was hoping.. may end up doing the zip later.. we'll see
|
|
June 20th, 2014, 01:46 PM | #55 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
my latest crash has taught me something important that i really didn't think was that important before: make sure your kill switch is extremely easy to get to with your thumb.
__________________________________________________
|
1 out of 1 members found this post helpful. |
June 20th, 2014, 09:10 PM | #56 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Yeah, this is an issue I genuinely need to address... Will do ASAP. Thank you
|
|
June 21st, 2014, 12:50 AM | #57 |
ninjette.org member
Name: mania
Location: Asia
Join Date: Oct 2012 Motorcycle(s): 2013 250 Posts: 242
|
The R6 mod works fine on my 2013
I get full throttle without any hand reposition/ re-grab which is all I wanted pic1- Stock tube pic 2- R6 tube pic 3 - Part Number on bag in pic |
|
June 26th, 2014, 12:52 AM | #58 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
|
|
August 21st, 2014, 06:50 AM | #59 |
ninjette.org member
Name: John
Location: Australia
Join Date: Feb 2014 Motorcycle(s): Ninja 300 Posts: 48
|
When you guys are talking about needing to trim the housing what exactly are you talking about? I just tried installing the 06 tube and can't the throttle doesn't snap back at all.
|
|
September 6th, 2014, 12:55 PM | #60 |
ninjette.org member
Name: Red Snapper XXX
Location: Red Snapper City
Join Date: Nov 2013 Motorcycle(s): Ninja 250R 2009 Posts: 39
|
Clicking Noise, The source of it.
Did the mod, and spend hours trying to track the clicking noise when I pulled the throttle.
The return throttle cable hole on the R6 tube is bigger than the throttle pull hole. Just makes a little clicking noise, because it's loose and bangs in the hole when you twist the throttle. The clicking is annoying, because I can feel it when I twist the throttle. You won't hear it when the bike is on. If you have any suggestions, please let me know. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Motion Pro quick turn throttle | rojoracing53 | 2008 - 2012 Ninja 250R Tech Talk | 43 | May 28th, 2013 07:18 AM |
[sportrider - latest stories] - Yoyodyne Quick-Turn Adjustable Throttle | Ninjette Newsbot | Motorcycling News | 0 | December 30th, 2010 01:11 AM |
[roadracingworld.com] - Tuesday Video: Installing A Revolver Quick-turn Throttle Kit | Ninjette Newsbot | Motorcycling News | 0 | February 23rd, 2010 02:20 PM |
[roadracingworld.com] - Monday Video: Installing A Revolver Quick-turn Throttle Kit F | Ninjette Newsbot | Motorcycling News | 0 | February 22nd, 2010 02:10 PM |
Dan Kyle's Quick turn throttle question | Gregular | 2008 - 2012 Ninja 250R Tech Talk | 7 | February 28th, 2009 03:14 AM |
|
|