Finally United!!!

Kscreations08 · March 17th, 2014, 03:39 AM

Went and got the ninjette yesterday, trailered her home, directed her to the basement, and flipped the tank
(Thanks to those that replied to this thread)
http://www.ninjette.org/forums/showthread.php?t=168091

And a special thanks to KKim for the gas tank removal thread.

Good News:

She is finally in my possession

There was nothing in the tank (cept gas o'course)

She's pretty lol

Bad News:

Petcock is leaky (faulty?) according to the On position-no gas-vacuum-this that and the third. Point is **** made a big mess spilling gas everywhere.

Still need to replace the right front turn signal. The back one stays on and doesnt blink when indicating right. Is this because the front is out?

Fuel guage doesn't work???

Baby Moms said it did before.

All things said and aside:

rasta · March 17th, 2014, 09:31 AM

Yay motorcycles are fun

Motofool · March 17th, 2014, 09:35 AM

Quote:

Originally Posted by Kscreations08

Went and got the ninjette yesterday, trailered her home................

She's pretty lol

..........All things said and aside:

Congratulations, Kevin !!!

CC Cowboy · March 17th, 2014, 01:50 PM

Who the hell is KKim?

ForceofWill · March 17th, 2014, 03:24 PM

Very nice man. The petcock thing happens to nearly all of us lol. You can try and take it apart and clean it if it bothers you. Next time have some small rubber hose ready to drain tank.

NevadaWolf · March 17th, 2014, 06:24 PM

Quote:

Originally Posted by Kscreations08

Still need to replace the right front turn signal. The back one stays on and doesnt blink when indicating right. Is this because the front is out?

Yep. The indicator on the dash should also be solid until you replace the bulb.

alex.s · March 17th, 2014, 06:29 PM

Quote:

Originally Posted by CC Cowboy

Who the hell is KKim?

**** that guy.

Floki · March 17th, 2014, 06:47 PM

Quote:

Originally Posted by Kscreations08

Fuel guage doesn't work???

Baby Moms said it did before.

There's a wire that is underneath the tank that connects to the fuel gauge. Is it connected? Those things aren't accurate anyway. Just fill up every 200 miles.

Kscreations08 · March 17th, 2014, 07:35 PM

Quote:

Originally Posted by CC Cowboy

Who the hell is KKim?

Quote:

Originally Posted by alex.s

**** that guy.

I can never tell if you guys are serious

alex.s · March 17th, 2014, 07:38 PM

if there is ever any question in your mind, the answer is always no.

Kscreations08 · March 17th, 2014, 07:42 PM

Fair enough lol. While I have you occupied, the speed rivets that connect the inner fairing... They were, how do you say... uncooperative. So their heads got snapped off and are now useless. Where do I find new ones or an easy alternative?

EDIT: I wasn't the one who snapped them. I actually flipped out when I found out my brother (who was "helping") did that. He was just trying to help but the phrase "Be nice to my bike" just didnt sink in

Kscreations08 · March 21st, 2014, 03:58 AM

Anybody? ^^^^^^^^^

ForceofWill · March 21st, 2014, 04:07 AM

Like these?
http://www.amazon.com/Amico-Parts-Pa...mm+push+rivets

Just measure the hole though, I'm not certain if they're 6mm.

Kscreations08 · March 21st, 2014, 05:09 AM

Thanks! I just looked it up, They are 8 MM according to the OEM replacement parts site I was on.... In hindsight, I couldve researched it before posting lol

ForceofWill · March 21st, 2014, 05:24 AM

Good to know for later. 8mm push rivets.

March 17th, 2014, 03:39 AM	#1
Kscreations08 Fresh Deli Meat Name: Kevin Location: Wilkes-Barre, Pennsylvania Join Date: Feb 2014 Motorcycle(s): 2009 250R Ninja -Neener- Posts: 678	Finally United!!! Went and got the ninjette yesterday, trailered her home, directed her to the basement, and flipped the tank (Thanks to those that replied to this thread) http://www.ninjette.org/forums/showthread.php?t=168091 And a special thanks to KKim for the gas tank removal thread. Good News: She is finally in my possession There was nothing in the tank (cept gas o'course) She's pretty lol Bad News: Petcock is leaky (faulty?) according to the On position-no gas-vacuum-this that and the third. Point is **** made a big mess spilling gas everywhere. Still need to replace the right front turn signal. The back one stays on and doesnt blink when indicating right. Is this because the front is out? Fuel guage doesn't work??? Baby Moms said it did before. All things said and aside: __________________________________________________ We shall call thee "Seahorse." -Antiant on Couvade Syndrome

March 17th, 2014, 09:31 AM	#2
rasta Your face Name: Wes Location: SF Bay Area Join Date: Jul 2013 Motorcycle(s): 2014 Honda CBR650f Posts: A lot.	Yay motorcycles are fun __________________________________________________ "even a proper fitting helmet can 'get loose'" -csmith

March 17th, 2014, 01:50 PM	#4
CC Cowboy ninjette.org certified postwhore Name: Whodat Location: Ware Is.,MA Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot. MOTM - Mar '13, Jun '14	Who the hell is KKim? __________________________________________________ If everything seems under control; you're just not going fast enough!
	1 out of 1 members found this post helpful.

March 17th, 2014, 07:38 PM	#10
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	if there is ever any question in your mind, the answer is always no. __________________________________________________

March 17th, 2014, 07:42 PM	#11
Kscreations08 Fresh Deli Meat Name: Kevin Location: Wilkes-Barre, Pennsylvania Join Date: Feb 2014 Motorcycle(s): 2009 250R Ninja -Neener- Posts: 678	Fair enough lol. While I have you occupied, the speed rivets that connect the inner fairing... They were, how do you say... uncooperative. So their heads got snapped off and are now useless. Where do I find new ones or an easy alternative? EDIT: I wasn't the one who snapped them. I actually flipped out when I found out my brother (who was "helping") did that. He was just trying to help but the phrase "Be nice to my bike" just didnt sink in __________________________________________________ We shall call thee "Seahorse." -Antiant on Couvade Syndrome Last futzed with by Kscreations08; March 17th, 2014 at 09:52 PM. Reason: Clarification of Abuse

March 17th, 2014, 03:24 PM	#5
ForceofWill Blind 250 Loving Whore Name: Tom Location: Chesapeake, VA Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.	Very nice man. The petcock thing happens to nearly all of us lol. You can try and take it apart and clean it if it bothers you. Next time have some small rubber hose ready to drain tank.

March 21st, 2014, 03:58 AM	#12
Kscreations08 Fresh Deli Meat Name: Kevin Location: Wilkes-Barre, Pennsylvania Join Date: Feb 2014 Motorcycle(s): 2009 250R Ninja -Neener- Posts: 678	Anybody? ^^^^^^^^^ __________________________________________________ We shall call thee "Seahorse." -Antiant on Couvade Syndrome

March 21st, 2014, 04:07 AM	#13
ForceofWill Blind 250 Loving Whore Name: Tom Location: Chesapeake, VA Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.	Like these? http://www.amazon.com/Amico-Parts-Pa...mm+push+rivets Just measure the hole though, I'm not certain if they're 6mm.

March 21st, 2014, 05:09 AM	#14
Kscreations08 Fresh Deli Meat Name: Kevin Location: Wilkes-Barre, Pennsylvania Join Date: Feb 2014 Motorcycle(s): 2009 250R Ninja -Neener- Posts: 678	Thanks! I just looked it up, They are 8 MM according to the OEM replacement parts site I was on.... In hindsight, I couldve researched it before posting lol __________________________________________________ We shall call thee "Seahorse." -Antiant on Couvade Syndrome

March 21st, 2014, 05:24 AM	#15
ForceofWill Blind 250 Loving Whore Name: Tom Location: Chesapeake, VA Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.	Good to know for later. 8mm push rivets.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[tilted horizons] - United Nations of Motorcycling?	Ninjette Newsbot	Motorcycling News	0	November 5th, 2013 08:20 PM
[roadracingworld.com] - Which Will Be Televised In The United States In Upcoming Week	Ninjette Newsbot	Motorcycling News	0	September 16th, 2013 02:50 PM
[motorcycledaily.com] - Suzuki Celebrates 50 Years in the United States . . . and a R	Ninjette Newsbot	Motorcycling News	0	September 13th, 2013 07:40 PM
CT United Ride 2012	BFisher244	Ride Reports	2	September 8th, 2012 09:29 PM
Map of every vehicle related fatality in the united states	OddlyOrdinary	General Motorcycling Discussion	20	May 11th, 2012 07:40 AM