June 18th, 2013, 06:37 AM | #281 |
ninjette.org sage
Name: Dan
Location: Perryopolis, PA
Join Date: Mar 2010 Motorcycle(s): 09' Blue Ninja 250R and 07' Honda 919 Posts: 605
|
DanMoto Exhausts
Does anyone know if they make a full exhaust or just a slipon?
|
|
June 18th, 2013, 06:51 AM | #282 |
ninjette.org newbie
Name: Roger
Location: Houston, TX
Join Date: Mar 2013 Motorcycle(s): 2009 Kawasaki Ninja 250r Posts: 3
|
Danmoto are only slip-on exhausts.
|
|
June 18th, 2013, 06:53 AM | #283 |
ninjette.org sage
Name: Brad
Location: Sydney
Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573
|
I doubt they have the money for the RnD to make full exhausts.
|
|
April 4th, 2014, 05:26 PM | #284 |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
Danmoto Carbon GP Exhaust
So, after impatiently waiting for a week. My Danmoto Carbon GP Exhaust finally came in!!!
Comparison Video: http://youtu.be/uaPM_P9JZkE |
|
April 4th, 2014, 05:53 PM | #285 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
nice tone
|
|
April 4th, 2014, 06:45 PM | #286 |
ninjette.org member
Name: Carlos
Location: NC
Join Date: Feb 2014 Motorcycle(s): 09 250R Posts: 38
|
Waiting on mine!
Ordered on 3/31 from Danmoto, UPS showing to be delivered on 4/8!!!! |
|
April 4th, 2014, 07:04 PM | #287 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
sounds more manly! confused the ignorant will be.
|
|
April 4th, 2014, 07:34 PM | #288 |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
Yeah, that sounds about right. I ordered mine 03/26 & didn't get them until today 04/04. It all depends where you live, it shipped from NV to PA. So, it's understandable & free shipping. So can't complain.
|
|
April 4th, 2014, 07:35 PM | #289 |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
|
|
April 4th, 2014, 08:25 PM | #290 |
Schönen Tag noch
Name: c
Location: Central Cali
Join Date: Sep 2013 Motorcycle(s): 08 ninja 250 race bike, 02 gixxer 600 telefonica Posts: 184
|
Sounds similar to my danmoto knock off pipe.
|
|
April 4th, 2014, 11:16 PM | #291 |
ninjette.org guru
Name: andrew
Location: oakdale california
Join Date: Nov 2011 Motorcycle(s): 2012 ninja 250 Posts: 296
|
is the dan moto louder thn the growler?
|
|
April 5th, 2014, 05:53 AM | #292 |
ninjette.org member
Name: Eddie
Location: Poconos, PA
Join Date: Oct 2013 Motorcycle(s): 2010 Ninja 250 2005 ZX10R Posts: 22
|
sounds real nice
|
|
April 5th, 2014, 06:14 AM | #293 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Subscribed. Keep us updated on how the exhaust holds up.
__________________________________________________
|
|
April 5th, 2014, 08:18 AM | #294 |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
I'm not too sure, I don't have the Growler to compare. Though, Danmoto is pretty loud! & for $135 shipped in a week is a steal.
https://www.dan-moto.com/DM_US/zx-25...oduct-368.html Thanks! I subscribed back. & I'll keep everyone updated on the exhaust. For right now, it's too cold & windy to ride. Thanks man, I'm pretty happy about it. lol. |
|
April 6th, 2014, 05:34 PM | #295 |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
Welp... looks like i found my exhaust for when i get my ninja soon
|
|
April 7th, 2014, 09:22 AM | #296 |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
Keep an eye out for the discoloring. I don't know if DM fixed that issue.
|
|
April 7th, 2014, 09:29 AM | #297 |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
On its website it says that no fuel changes need to be made.
Did anyone just slip it on and not change anything? Notice a difference in performance? Did anyone put it on and did change the fueling? Differences? |
|
April 7th, 2014, 09:31 AM | #298 | |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
Quote:
|
|
|
April 7th, 2014, 09:51 AM | #299 |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
I had the JISU, and mine didn't show up until like a month, 1200 miles later.
|
|
April 7th, 2014, 01:06 PM | #300 |
ninjette.org member
Name: Bobby
Location: Parker
Join Date: Apr 2014 Motorcycle(s): Ninja 250r. Suzuki Ts 185 Posts: 27
|
Danmoto gp!
Finally ordered up my danmoto GP Carbon fiber exhaust system today. I'm excited to see and hear the improvement. Any one else have Input on the danmoto systems?
|
|
April 7th, 2014, 02:30 PM | #301 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/merged
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
April 7th, 2014, 04:08 PM | #302 |
ninjette.org member
Name: Pete
Location: Easton, PA
Join Date: Mar 2014 Motorcycle(s): 2009 Kawasaki Ninja 250 Posts: 73
|
UPDATE: So here is my estimated mpg on my 250 with my new Danmoto Carbon GP Exhaust. I'm at 3/4 tank full & got about 63 miles on the first gallon of gas.
Mods: Shimmed Needles (3 Washers) Snorkel Removed Problems to be fixed: Popping/backfire on deceleration & when throttle is closed |
|
April 9th, 2014, 09:24 AM | #303 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
mine was fine
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
April 9th, 2014, 09:33 AM | #304 | |
Recalculating. . .
Name: Jason
Location: Colorado
Join Date: Nov 2011 Motorcycle(s): '09 250 (sold) '12 Ninja 650 Posts: 353
|
Quote:
I heard it for the first time while off the bike (when the new owner took it for a test spin) when I sold it last month and it does sound pretty good!
__________________________________________________
jasontracewell.com |
|
|
April 12th, 2014, 02:47 PM | #305 |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
Ahhh ! Just ordered it right now. Hopefully will be getting my bike Monday !
I hope I get it by the end of the week next week I'm a little hesitant on how loud it will be. But for $135 I'm willing to take the risk. I didnt get the baffle because I heard in videos it sounded more like a dirt bike and took away from the deep throaty tone. If I don't like it, I'll throw it up here. |
|
April 14th, 2014, 02:45 AM | #306 | |
ninjette.org member
Name: Alex
Location: Las Vegas
Join Date: Apr 2014 Motorcycle(s): '08 Ninja 250 Posts: 132
|
Quote:
|
|
|
April 22nd, 2014, 07:50 PM | #307 |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
Got my danmoto gp exhaust today. Ordered it 4/14.
What a bitchh it was to put on. First off, the springs that attach the supplied midpipe coupler to the danmoto exhaust are practically impossible to put on. Then the bracket thats given has like a 90 degree bend on both sides which need to be straightened out which is also practically impossible. Because I couldn't get the ends to be totally straight, I couldnt put on the silver washer on the outside with the bolt. Also, the rubber protective strip they give to align underneath the bracket is....yup you guessed it... practically impossible to align straight so I threw it aside and accepted the fact I was going to get scratches on it. Lastly, the worm clamp that goes over the midpipe and the oem bike exhaust wouldn't tighten it tight enough to keep the exhaust from moving and the screw ended up breaking. I tried the oem worm clamp and it also wouldn't clamp it down tight enough. So this week/weekend I'll have to go to the auto store and pick up a quality worm clamp. I wasn't able to ride the bike with the exhaust on because it was raining and almost 10pm but I turned it on and moved it a few feet. Damn this thing is loud. My neighbors are going to kill me. |
|
April 23rd, 2014, 12:32 AM | #308 |
ninjette.org guru
Name: Eduardo
Location: Hollywood, Calirfnia
Join Date: Mar 2012 Motorcycle(s): 2010 Kawasaki Ninja 250r special edition Posts: 286
|
It's actually pretty easy to install. The bolt did break on me but that OK I just replaced the screw and kept the clamp. Two years with my GP exhaust I still love it. Definitely sounds better then the Growler Exhaust. Don't for get to throw in the baffle. Gives it a nice deeper sound.
|
|
April 23rd, 2014, 09:43 PM | #309 | |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
Quote:
Kind of upset that I will have to remove the whole exhaust to put the baffle in... Should probably be here in the next...... 10 days |
|
0 out of 1 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Danmoto exhaust illegal in CA?! | RandomPhantom | 2008 - 2012 Ninja 250R Farkles | 29 | February 20th, 2014 03:08 AM |
Has anyone had any problems with the DanMoto JISU exhaust?? | NinjaBoyEddy | 2008 - 2012 Ninja 250R Tech Talk | 46 | January 8th, 2013 07:10 PM |
Looking to trade my danmoto carbon gp exhaust for a jisu | NinjaBoyEddy | Items Wanted | 1 | April 30th, 2012 10:54 PM |
Slip On Exhaust: DanMoto and HB Growler | caps | 2008 - 2012 Ninja 250R Tech Talk | 7 | July 22nd, 2011 09:15 AM |
FS: DanMoto CF Exhaust complete w/Baffle | red | Motorcycle-related | 3 | June 18th, 2011 07:18 PM |
|
|