August 4th, 2009, 04:32 PM | #1 |
ninjette.org sage
Name: A
Location: Long Island, NY
Join Date: Apr 2009 Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold) Posts: 586
|
Cupholders on a bike?
OK.. when I take the bike to work I wear a backpack that has a mesh pocket to fit a nice 'semi sealable' coffee mug... I stop at Dunkin Donuts a few blocks from work and pop it in there...
Now when we were in Florida I saw a few cruiser bikes with cupholders on them holding the same type of coffee mug thing... bug after some research it seems like it is designed to clamp onto the handlebar.. and my 99 doesnt seem to have too much exposed bar from the clipon.. Is anyone using any kind of cup holder on their ninjettes? I dont need anything crazy, and I don't want anything that will make the bike look weird.. but it would be nice to fill it up at Dunkin Ds and then pop it in a holder.. leave the backpack at home when I dont need it. Adam
__________________________________________________
2000 Honda CBR600F4 Silver and Red 1999 Kawi Racing Green Ninja 250 sold |
|
August 4th, 2009, 04:59 PM | #2 |
ninjette.org certified postwhore
Name: Whodat
Location: Ware Is.,MA
Join Date: Jan 2009 Motorcycle(s): I pass the wind! Posts: A lot.
MOTM - Mar '13, Jun '14
|
That brings up a funny story. I went on a bike trip, with a buddy of mine, from Boston to New Orleans. I was breaking in a Yamaha 750 for that year of racing. On the way back, while still in Louisianna, I ran up on a guy on a new FJ1200 (or was it an 1100). The guy was cruising down the road with a beer stuck in the bottom of his tank bag. He had the zipper opened enough to hold a koozie with a cold beer in it.
I'm going to stop the story now.
__________________________________________________
If everything seems under control; you're just not going fast enough! |
|
August 4th, 2009, 05:06 PM | #3 |
ninjette.org sage
Name: Scott
Location: DFW TX
Join Date: Jul 2009 Motorcycle(s): 2009 Ninja zx6r Posts: 609
|
|
|
August 4th, 2009, 05:18 PM | #4 |
ninjette.org certified postwhore
Name: Travis
Location: Warwick, RI
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250R Posts: A lot.
|
Most non dealer, parts and accesory shops will have them. They clip onto the handle bars. I personally don't think it would be a great idea on the ninjette because of space and bar clearance. I have seen them on touring bikes. you know those guys how use 3/4 helmets with the microphones and always go in groups of two on really long rides cross country. In that case I think it might be a good idea. I don't think it would be wise on a cramped sport bike.
__________________________________________________
Addicted to anything that has an engine and rolls. |
|
August 4th, 2009, 05:31 PM | #5 |
ninjette.org member
Name: Zach
Location: Upstate NY
Join Date: Jun 2009 Motorcycle(s): Yamaha R6 (street), GSXR 750 (track) and a Harley FXDB Posts: 140
|
Had a cup holder on my Goldwing. The previous owner had installed in on there and I never bothered to take it off.
I used to do the same thing you are doing. What I did different was I had a thermous that I would dump the coffee into, throw it in my bag or saddlebag and be on my way. I made a consious effort to make sure it would stand up (for a while at least) wherever I put it but wasn't worried if it tipped. Thermous and a cargo net maybe? Just a thought...
__________________________________________________
Previous rides: Ninja 650, Ninja 250, Goldwing and a Nightster |
|
August 4th, 2009, 06:38 PM | #6 |
ninjette.org sage
Name: A
Location: Long Island, NY
Join Date: Apr 2009 Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold) Posts: 586
|
I have also tried the thermos on the bungee idea.. put it in a plastic bag.. might do that again and leave a cup at work.. who knows.. I like that cupholder in the vid.. interesting idea... I guess it is magnetic? who knows..
__________________________________________________
2000 Honda CBR600F4 Silver and Red 1999 Kawi Racing Green Ninja 250 sold |
|
August 4th, 2009, 11:28 PM | #7 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
The motorcycle club I ride with got me an insulated cup holder that mounts on a RAM ball, just like a GPS or anything else. It was a gag gift as they felt that the cupholder might be the only gadget/farkle not already mounted on my BMW. I feel guilty that I haven't actually used it yet, and it's just sitting in the garage. Someday.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
August 5th, 2009, 10:48 AM | #8 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
How do you guys like that crazy dance he did?
|
|
August 5th, 2009, 10:52 AM | #9 |
ninjette.org member
Name: Arthur
Location: NoVA
Join Date: Jun 2009 Motorcycle(s): '03 EX250 Posts: 134
|
Camelbak... or I'll put a bottle of whatever I want in my camelbak. I also thought about the cupholder idea so I could grab a cup of coffee or something on the road, but I honestly don't know how I feel about risking hot coffee dripping / spilling everywhere and getting all sticky in the event of rough pavement, train tracks, speed bumps, or a sudden stop or something.
|
|
August 5th, 2009, 04:10 PM | #10 |
ninjette.org member
Name: Arthur
Location: NoVA
Join Date: Jun 2009 Motorcycle(s): '03 EX250 Posts: 134
|
Additionally Ram sells mounts that can mount onto the top of the brake fluid reservoir.
Posted via Mobile Device |
|
August 6th, 2009, 12:55 PM | #11 |
Giggity Giggity
Name: Ryam
Location: San Diego
Join Date: Feb 2009 Motorcycle(s): 08 ninja 250R aka Hiryu Posts: 481
|
you can invent a "fanny pack" kinda thingamajig and have more than one coffee mug or cup in easy reach at the hip!!
__________________________________________________
Facebook DY Fender chop, Danmoto CB slip-on w/baffle, Airbox removed, Kleen-air removed, shimmed needles, Mikuni #117.5 Main jets, K&N RU-1822 air filter pods |
|
August 6th, 2009, 07:58 PM | #12 |
ninjette.org sage
Name: Chris
Location: Huntsville, AL
Join Date: May 2009 Motorcycle(s): 2009 Ninja 250 (sold) Posts: 755
|
A guy I work with has a cupholder on his vulcan, it seems so damn useful.
The more I commute daily on my ninjette, the more I could see myself buying a touring bike with hard luggage and cupholders. It seems so much more practical as a car replacement than the Ninja. |
|
August 6th, 2009, 11:41 PM | #13 |
ninjette.org certified postwhore
Name: addy126
Location: Tx
Join Date: May 2009 Motorcycle(s): '09 Kawasaki N-250 + '09 Vulcan 900 Classic Lt Posts: A lot.
|
Here's one that I've found that may be interesting and one that I'm thinkin on purchasing! Certainly would fit the bill... http://www.cbxmanmotorcycles.com/Mot...up-Holder.aspx
Purchased it.... will be here next Wednesday ..... will provide update and pic as to how it sits on the N-250 "09 Last futzed with by addy126; August 8th, 2009 at 01:50 PM. |
|
August 8th, 2009, 09:24 AM | #14 |
ninjette.org sage
Name: Scott
Location: DFW TX
Join Date: Jul 2009 Motorcycle(s): 2009 Ninja zx6r Posts: 609
|
Wouldn't it be kind of hard to drink with a full face helmet though?
|
|
August 8th, 2009, 10:10 AM | #15 |
ninjette.org sage
Name: A
Location: Long Island, NY
Join Date: Apr 2009 Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold) Posts: 586
|
I'm not looking to drink on the bike.. just transport coffee I pick up on the way to work,
__________________________________________________
2000 Honda CBR600F4 Silver and Red 1999 Kawi Racing Green Ninja 250 sold |
|
August 8th, 2009, 01:48 PM | #16 |
ninjette.org certified postwhore
Name: addy126
Location: Tx
Join Date: May 2009 Motorcycle(s): '09 Kawasaki N-250 + '09 Vulcan 900 Classic Lt Posts: A lot.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcycledaily.com] - MD Bike of the Year: KTM 1190 Adventure (Bike Reports) (News) | Ninjette Newsbot | Motorcycling News | 0 | December 28th, 2014 06:50 PM |
[motorcycle-usa.com] - Harley Bike Week Ride-In Bike Show 2014 | Ninjette Newsbot | Motorcycling News | 0 | March 13th, 2014 12:10 PM |
[superbikeplanet.com] - Hayden: Lab Bike Lap Time Similar To Current Bike | Ninjette Newsbot | Motorcycling News | 0 | June 7th, 2013 11:40 AM |
[topix.net] - Honda Chopper Bike: A futuristic bike to complement the personality of | Ninjette Newsbot | Motorcycling News | 0 | November 29th, 2011 02:40 PM |
[superbikeplanet.com] - Finally a Bike That Fits Him? Sic Tests 1000cc Honda GP Bike | Ninjette Newsbot | Motorcycling News | 0 | October 4th, 2011 06:40 AM |
|
|